HBLC-CO2

HBLC-CO2 is designed for the measurement of CO2 refrigerant levels in chillers, evaporators and condensers.

The sensor detects the refrigerant and transmits the signal to an analog 4-20 mA signal.

The sensor has been pre-calibrated to CO2. It can however be calibrated to other refrigerants.

Product features

Applikationer

Specifications

Ordering code

Complete solution with sensor and transmitter in one unit.
Simple to install by one thread sleeve. A cost optimised solution
LED indication of power supply and alarm status
Unique split design which make it easy to install and make diagnostic. The electronic part can be easily dismounted from the mechanical part by 2 small screws.

HBLC-CO2 is mounted in a CO₂ receiver for the measurement of liquid levels.

Drawing

Electrical connection

Power supply		Mechanical specifications
Voltage	24 AC/DC + 10%	Thread connection	3/4"
Energy consumption	Max 50 mA	Material - liquid parts	AISI 304 / PTFE
Plug connection	M12, 5 pins - DIN 0627	Material - electronic parts	Nylon 6 (PA)
Output function		Size	Depends on type
Analog output	4-20 mA	Weight	Depends on type
Potentiale free relay output	Max. 1 A (24W)	Type	Angle
Environmental conditions		Indication
Ambiant temperature	-20…+50 °C	LED indication	LED 1 x green, 1 x yellow and 1 x red
Refrigerant temperature	-50…+80 °C	Approvals
Max. pressure	150 bar	ЭEMC test	EN 61000-2
Protection degree	IP65	GOST R	No 0903044
Vibrations	IEC 68-2-6 (4g)	Accessories included
		M12 cabel - 5 m	HBxC-M12/5
		Cable specification	PUR - 5 x 0,34 mm2