CMO 14-16-18 TCMO 18
Description for compressors CMO 24-26-28 и TCMO 18 Mk2
The CMO 1 is a reciprocating compressor with several cylinders in the same block. The first digit in the type number indicates the stage of development of the compressor. The compressor comes in 4-, 6- and 8-cylinder versions, indicated by the last digit in the type number.
The TCMO 18 is a 8-cylinder version, which compresses the gas in two stages, with 6 low-pressure cylinders and 2 high-pressure cylinders. The type can be determined by the compressor’s name-plate which is located at the bottom on one side of the compressor.You can find detailed information on our website: http://coolref.ru/EN
Spare Parts for CMO 14-16-18 TCMO 18
Spare Parts for CMO 14-16-18 | |||||||
TCMO18 | |||||||
Belonging drawing: CMO 0662-101 & 0662-104 | |||||||
Belonging drawing: TCMO 0662-108 & 0662-104 | |||||||
Pos. | Weight | Number each compr. | Part-No. | ||||
No. | Designation | each | CMO | CMO | CMO | TCMO | |
in kg | 14 | 16 | 18 | 18 | |||
Compressor frame | |||||||
1A -1 | frame CMO 14 | 127.000 | 1 | 3111-054 | |||
1A -2 | frame CMO 16 | 140.000 | 1 | 3111-055 | |||
1A -3 | frame CMO 18 | 143.000 | 1 | 3111-031 | |||
1A -4 | frame TCMO 18 | 145.000 | 1 | 3111-062 | |||
1B -1 | non-return valve | 0.400 | 1 | 1 | 1 | 1 | 2415-031 |
1C -1 | hexagon plug C 3/4" with collar | 0.065 | 1 | 1 | 1 | 1 | 2314-027 |
1D-1 | gasket for plug ø34/27 x 1.5 | 0.002 | 1 | 1 | 1 | 1 | 2356-140 |
Top cover without cooling | |||||||
2A -1 | top cover | 2.960 | 2 | 3 | 4 | 4 | 3113-117 |
2B -1 | gasket for top cover | 0.002 | 2 | 3 | 4 | 4 | 2353-101 |
2C -1 | hexagon head screw M 12 x 75 | 0.080 | 24 | 36 | 48 | 48 | 1424-061 |
2D -1 | washer ø 24/13 x 2.5 | 0.006 | 24 | 36 | 48 | 48 | 1436-036 |
Top cover with cooling | |||||||
2A -2 | top cover | 3.040 | 2 | 3 | 4 | 4 | 3113-132 |
2B -1 | gasket for top cover | 0.002 | 2 | 3 | 4 | 4 | 2353-101 |
2C -1 | hexagon head screw M 12 x 75 | 0.080 | 24 | 36 | 48 | 48 | 1424-061 |
2D -1 | washer ø 24/13 x 2.5 | 0.006 | 24 | 36 | 48 | 48 | 1436-036 |
Side cover with oil level glass | |||||||
3A -1 | side cover | 6.650 | 1 | 1 | 1 | 1 | 3113-099 |
3B -1 | gasket for side cover | 0.002 | 1 | 1 | 1 | 1 | 2353-101 |
3C -1 | hexagon head screw M 12 x 65 | 0.070 | 12 | 12 | 12 | 12 | 1424-059 |
3D -1 | washer ø 24/13 x 2.5 | 0.006 | 12 | 12 | 12 | 12 | 1436-036 |
3G -1 | oil level glass | 0.230 | 1 | 1 | 1 | 1 | 1226-015 |
3H -1 | o-ring ø 52.07 x 2.62 | 0.002 | 1 | 1 | 1 | 1 | 1331-140 |
3J -1 | hexagon head screw M 6 x 18 | 0.010 | 4 | 4 | 4 | 4 | 1424-148 |
side cover with thermo pump | |||||||
(see special parts list 0662-114) | |||||||
side cover for unloading start | |||||||
(see section 87) | |||||||
side cover with solenoid valves | |||||||
(see section 86) | |||||||
side cover with Sabroe-Matic | |||||||
(see special parts list 0662-115) | |||||||
End cover at pump | |||||||
4A -1 | end cover at pump (CMO) | 34.500 | 1 | 1 | 1 | 3113-006 | |
4A -2 | end cover at pump (TCMO) | 34.500 | 1 | 3113-112 | |||
4B -1 | gasket for end cover (CMO) | 0.005 | 1 | 1 | 1 | 2353-105 | |
4B -2 | gasket for end cover (TCMO) | 0.005 | 1 | 2353-142 | |||
4C -1 | hexagon head screw M 14 x 110 | 0.150 | 14 | 14 | 14 | 14 | 1424-087 |
4D -1 | hexagon head screw M 14 x 120 | 0.165 | 4 | 4 | 4 | 4 | 1424-090 |
4E -1 | washer ø 28/16 x 3 | 0.010 | 18 | 18 | 18 | 18 | 1436-037 |
Bearing cover at pump | |||||||
5A -1 | bearing cover | 8.650 | 1 | 1 | 1 | 1 | 3113-008 |
5B -1 | gasket 0.3 mm | 0.007 | 1 | 1 | 1 | 1 | 2353-107 |
5B -2 | gasket 0.5 mm | 0.010 | 1 | 1 | 1 | 1 | 2353-108 |
5B -3 | gasket 0.75 mm | 0.016 | 1 | 1 | 1 | 1 | 2353-109 |
5B -4 | gasket 1.0 mm | 0.020 | 1 | 1 | 1 | 1 | 2353-110 |
5C -1 | hexagon head screw M 10 x 35 | 0.030 | 5 | 5 | 5 | 5 | 1424-193 |
5D -1 | hexagon head screw M 10 x 50 | 0.040 | 3 | 3 | 3 | 3 | 1424-196 |
5E -1 | main lining | 0.510 | 1 | 1 | 1 | 1 | 2132-019 |
5E -2 | main lining for repair (0.5 mm undersize) | 0.510 | 1 | 1 | 1 | 1 | 2132-020 |
Bearing cover at shaft seal | |||||||
6A -1 | bearing cover at shaft seal | 9.000 | 1 | 1 | 1 | 1 | 3113-007 |
6B -1 | gasket 0.5 mm | 0.004 | 1 | 1 | 1 | 1 | 2353-106 |
6C -1 | hexagon head screw M 10 x 35 | 0.030 | 7 | 7 | 7 | 7 | 1424-193 |
6E -1 | main lining | 0.510 | 1 | 1 | 1 | 1 | 2132-019 |
6E -2 | main lining for repair (o,5 mm undersize) | 0.510 | 1 | 1 | 1 | 1 | 2132-020 |
End cover at shaft seal | |||||||
7A -1 | end cover | 33.000 | 1 | 1 | 1 | 1 | 3113-005 |
7B -1 | gasket for end cover | 0.022 | 1 | 1 | 1 | 1 | 2353-104 |
7C -1 | o-ring ø132.7 x 7 | 0.024 | 1 | 1 | 1 | 1 | 1331-050 |
7D -1 | hexagon head screw M 14 x 90 | 0.126 | 14 | 14 | 14 | 14 | 1424-083 |
7E -1 | hexagon head screw M 14 x 160 | 0.208 | 2 | 2 | 2 | 2 | 1424-095 |
7F -1 | washer ø 28/15 x 3 | 0.008 | 16 | 16 | 16 | 16 | 1436-037 |
7G -1 | dust strainer | 0.810 | 1 | 1 | 1 | 1 | 3425-057 |
7H -1 | gasket for dust strainer ø 326 x 8 | 0.074 | 1 | 1 | 1 | 1 | 2353-118 |
7J -1 | hexagon head screw M 5 x 10 | 0.002 | 8 | 8 | 8 | 8 | 1424-140 |
7K -1 | lock washer ø 10.5/5.3 x 0.6 | 0.002 | 8 | 8 | 8 | 8 | 1437-061 |
Shaft seal cover | |||||||
8A -1 | shaft seal cover | 3.000 | 1 | 1 | 1 | 1 | 3113-004 |
8B -1 | o-ring ø 98.2 x 3.5 | 0.004 | 1 | 1 | 1 | 1 | 1331-081 |
8C -1 | hexagon head screw M 8 x 30 | 0.004 | 5 | 5 | 5 | 4 | 1424-169 |
8D -1 | spring washer ø 14.2/8.2 x 2 | 0.002 | 5 | 5 | 5 | 5 | 1437-023 |
Delivery oil pipe (internal) | |||||||
9A -1 | oil pipe CMO 14 | 0.294 | 1 | 3141-106 | |||
9A -2 | oil pipe CMO 16 | 0.294 | 1 | 3141-107 | |||
9A -3 | oil pipe CMO 18 - TCMO 18 | 0.318 | 1 | 1 | 3141-101 | ||
9B -1 | 0-ring ø 18.5 x 2.62 | 0.003 | 4 | 4 | 4 | 4 | 1331-017 |
9C -1 | thrust ring | 0.004 | 2 | 2 | 2 | 2 | 2351-020 |
9D -1 | 0-ring for by-pass ø 7.65 x 1.78 | 0.001 | 3 | 3 | 3 | 3 | 1331-009 |
Shaft seal | |||||||
10 -1 | shaft seal complete | 0.660 | 1 | 1 | 1 | 1 | 3126-017 |
10A -1 | spring retainer | 0.196 | 1 | 1 | 1 | 1 | 3126-020 |
10B -1 | spring | 0.002 | 10 | 10 | 10 | 10 | 2142-050 |
10D -1 | 0-ring oil treated | 0.021 | 1 | 1 | 1 | 1 | 3126-111 |
10E -1 | slide ring (cast iron) | 0.660 | 1 | 1 | 1 | 1 | 3126-018 |
10F -1 | slide ring (special carbon) | 0.070 | 1 | 1 | 1 | 1 | 3126-110 |
10G -1 | 0-ring ø 56.5 x 5.3 | 0.006 | 1 | 1 | 1 | 1 | 1331-037 |
10J -1 | spirolox-ring | 0.008 | 1 | 1 | 1 | 1 | 1437-260 |
10K -1 | cone-ring | 0.196 | 1 | 1 | 1 | 1 | 3126-019 |
10N -1 | Crooved-pin ø 4 x 20 | 0.002 | 2 | 2 | 2 | 2 | 1446-081 |
0il pump | |||||||
11 -1 | oil pump complete | 4.100 | 1 | 1 | 1 | 1 | 3141-160 |
11 -B | 0-ring ø 82.15 x 3.5 | 0.004 | 1 | 1 | 1 | 1 | 1331-077 |
11 -C | hexagon head screw 8 x 40 | 0.018 | 3 | 3 | 3 | 3 | 1424-171 |
11 -D | spring washer ø 14.2/8.2 x 2 | 0.002 | 3 | 3 | 3 | 3 | 1437-023 |
11E -1 | carrier disc | 0.246 | 1 | 1 | 1 | 1 | 2125-036 |
11F -1 | bushing for carrier disc | 0.004 | 2 | 2 | 2 | 2 | 2125-037 |
Unloading mechanism | |||||||
12 -1 | unloading mechanism complete | 1.538 | 4 | 6 | 8 | 4 | 3135-107 |
12A -1 | socket cap screw M 5 x 20 | 0.004 | 8 | 12 | 16 | 8 | 1413-332 |
12B -1 | spring washer | 0.002 | 8 | 12 | 16 | 8 | 1437-061 |
12C -1 | bottom part | 0.204 | 4 | 6 | 8 | 4 | 3135-111 |
12D -1 | spring guide | 0.120 | 4 | 6 | 8 | 4 | 3135-110 |
12E -1 | socket cap screw M 5 x 10 | 0.002 | 16 | 24 | 32 | 16 | 1413-330 |
12F -1 | spirolox-ring | 0.020 | 4 | 6 | 8 | 4 | 1437-265 |
12G -1 | unloading piston | 0.436 | 4 | 6 | 8 | 4 | 3135-109 |
12H -1 | 0-ring oil treated | 0.010 | 4 | 6 | 8 | 4 | 2353-112 |
12J -1 | unloading cylinder | 0.682 | 4 | 6 | 8 | 4 | 3135-108 |
12K -1 | 0-ring oil treated | 0.010 | 4 | 6 | 8 | 4 | 2353-111 |
12L -1 | spring | 0.002 | 72 | 108 | 144 | 72 | 2142-052 |
Crank shaft | |||||||
*)16 -1 | crankshaft CMO 14 complete (ex 3121-064) | 15.000 | 1 | 3121-150 | |||
*)16 -2 | crankshaft CMO 16 complete (ex 3121-065) | 15.100 | 1 | 3121-151 | |||
*)16 -3 | crankshaft CMO 18 and TCMO 18 (ex 3121-066) | 15.200 | 1 | 1 | 3121-152 | ||
16C -1 | Key | 0.034 | 1 | 1 | 1 | 1 | 2123-003 |
16D -1 | plain washer with pin | 0.245 | 1 | 1 | 1 | 1 | 2125-040 |
16E -1 | hexagon head screw M 14 x 45 | 0.070 | 1 | 1 | 1 | 1 | 1424-242 |
16F -1 | spring washer | 0.006 | 1 | 1 | 1 | 1 | 1437-030 |
16G -1 | spray ring | 0.004 | 1 | 1 | 1 | 1 | 1437-290 |
16H -1 | plug | 0.004 | 3 | 3 | 3 | 3 | 1343-140 |
16J -1 | grooved pin ø 8 x 40 | 0.016 | 2 | 2 | 2 | 2 | 1446-084 |
Connecting rod | |||||||
for CMO and TCMO (LP) | |||||||
17 -1 | connecting rod complete with bolts | 0.500 | 4 | 6 | 8 | 6 | 3123-009 |
17 -2 | connecting rod complete (undersize) | 0.500 | 4 | 6 | 8 | 6 | 3123-050 |
17C -1 | bolts for connecting rod | 0.030 | 8 | 12 | 16 | 12 | 2111-004 |
17H -1 | self locking nut UNF 5/16" | 0.006 | 8 | 12 | 16 | 12 | 1433-115 |
17J -1 | chamfered washer ø 17/8.4 x 2 | 0.008 | 8 | 12 | 16 | 12 | 1436-034 |
for TCMO (HP) needle bearing | |||||||
17 -3 | connecting rod complete with bolts | 0.500 | 2 | 3123-070 | |||
17 -4 | connecting rod complete (undersize) | 0.500 | 2 | 3123-073 | |||
17C -1 | bolts for connecting rod | 0.030 | 4 | 2111-004 | |||
17H -1 | self locking nut UNF 5/16" | 0.006 | 4 | 1433-115 | |||
17J -1 | chamfered washer ø 17/8.4 x 2 | 0.008 | 4 | 1436-034 | |||
17K -1 | needle bearing | 2 | 1511-272 | ||||
Piston | |||||||
for CMO and TCMO (LP) | |||||||
18 -1 | piston with pin and rings | 0.212 | 4 | 6 | 8 | 6 | 3124-043 |
18A -1 | piston pin | 0.098 | 4 | 6 | 8 | 6 | 3125-083 |
18C -1 | piston ring | 0.008 | 4 | 6 | 8 | 6 | 3125-011 |
18D -1 | oil scraper ring | 0.010 | 4 | 6 | 8 | 6 | 3125-062 |
18E -1 | circlip for bore ø 25 | 0.002 | 8 | 12 | 16 | 12 | 1437-141 |
for TCMO (HP) | |||||||
18 -2 | piston complete with pin and rings | 0.210 | 2 | 3124-055 | |||
18A -2 | piston pin for needle bearing | 0.090 | 2 | 3125-120 | |||
18C -1 | piston ring | 0.008 | 2 | 3125-011 | |||
18D -1 | oil scraper ring | 0.010 | 2 | 3125-062 | |||
18E -2 | circlip for bore ø 22 | 0.002 | 4 | 1437-138 | |||
*) Approval from Classification Society specified by customer. | |||||||
TCMO (HP) | |||||||
If connecting rod with DX bearing is to be replaced, connecting rod, | |||||||
piston, and piston pin shall also be replaced contemporarily with | |||||||
parts suited for needle bearings. | |||||||
Pos. | Weight | Number each compr. | Part-No. | ||||
No. | Designation | each | CMO | CMO | CMO | TCMO | |
in kg | 14 | 16 | 18 | 18 | |||
Cylinder liner with suction valve | |||||||
19 -1 | cylinder liner compl.CMO-TCMO(LP) | 2.215 | 4 | 6 | 8 | 6 | 3112-021 |
19 -2 | cylinder liner compl. TCMO (HP) | 2.240 | 2 | 3112-054 | |||
19A -1 | cylinder liner | 1.350 | 4 | 6 | 8 | 8 | 3112-055 |
19B -1 | unloading ring with pins | 0.800 | 4 | 6 | 8 | 6 | 3135-112 |
19D -1 | spring for unloading ring | 0.001 | 24 | 36 | 48 | 36 | 2142-051 |
19E -1 | tension spring coil | 0.003 | 4 | 6 | 8 | 6 | 2142-054 |
19F -1 | ring plate for suction valve | 0.020 | 4 | 6 | 8 | 8 | 3131-014 |
19G-1 | valve spring | 0.001 | 16 | 24 | 32 | 32 | 2141-047 |
19H -1 | suction valve retaining plate | 0.500 | 4 | 6 | 8 | 8 | 3132-054 |
19J -1 | guide ring for discharge valve | 0.400 | 4 | 6 | 8 | 8 | 3134-004 |
19K -1 | gasket ø 112/92 x 0.5 | 0.001 | 4 | 6 | 8 | 8 | 2353-114 |
19L -1 | socket cap screw M 5 x 35 | 0.006 | 24 | 36 | 48 | 48 | 1413-334 |
19M -1 | 0-ring ø 107.55 x 3.5 | 0.006 | 4 | 6 | 8 | 8 | 1331-085 |
19N -1 | 0-ring ø 69.5 x 2.62 | 0.002 | 2 | 1331-145 | |||
Discharge valve | |||||||
20 -1 | discharge valve, complete | 0.500 | 4 | 6 | 8 | 8 | 3136-038 |
20A -1 | valve seat | 0.040 | 4 | 6 | 8 | 8 | 3133-008 |
20B -1 | valve retaining plate | 0.350 | 4 | 6 | 8 | 8 | 3132-021 |
20C -1 | ring plate for discharge valve | 0.014 | 4 | 6 | 8 | 8 | 3131-006 |
20D -1 | counter sunk screw M 8 x 40 | 0.016 | 4 | 6 | 8 | 8 | 1413-106 |
20E -1 | nut M 8 | 0.004 | 8 | 12 | 16 | 16 | 1432-063 |
20F -1 | spring guide | 0.016 | 4 | 6 | 8 | 8 | 2145-011 |
20G -1 | spring dowel sleeve | 0.001 | 4 | 6 | 8 | 8 | 1446-014 |
20H -1 | valve spring | 0.001 | 24 | 36 | 48 | 48 | 2141-047 |
20K -1 | guide for ring plate | 0.006 | 4 | 6 | 8 | 8 | 3132-044 |
Spring for safety head | |||||||
21 -1 | spring | 0.170 | 4 | 6 | 8 | 8 | 2142-016 |
Oil pressure valve | |||||||
22 -1 | oil pressure valve, complete | 0.450 | 1 | 1 | 1 | 1 | 3142-150 |
22G -1 | gasket | 0.001 | 1 | 1 | 1 | 1 | 2354-075 |
22H -1 | hexagon head screw Ml 2 x 75 | 0.040 | 2 | 2 | 2 | 2 | 1424-061 |
Oil charging valve | |||||||
for CFC refrigerant | |||||||
23 -1 | oil charging valve | 0.300 | 1 | 1 | 1 | 1 | 1374-132 |
23A -1 | union-nut 3/4" flare | 0.005 | 1 | 1 | 1 | 1 | 1376-012 |
23B -1 | seal cap 1/2" | 0.002 | 1 | 1 | 1 | 1 | 1376-042 |
23C -1 | bushing G 3/4" x G 3/8" | 0.140 | 1 | 1 | 1 | 1 | 2312-007 |
23D -1 | gasket ø 34/27 x 1.5 | 0.001 | 1 | 1 | 1 | 1 | 2356-140 |
for R 717 | |||||||
23 -2 | oil charging valve | 1.100 | 1 | 1 | 1 | 1 | 2413-005 |
23E -1 | reducing nipple G 7/8" x G 3/4" | 0.158 | 1 | 1 | 1 | 1 | 2311-006 |
23F -1 | gasket ø 34/27 x 1.5 | 0.002 | 1 | 1 | 1 | 1 | 2356-140 |
23G -1 | gasket ø 27/16 x 1.5 | 0.002 | 2 | 2 | 2 | 2 | 2356-132 |
23H -1 | threaded plug G 7/8" | 0.154 | 1 | 1 | 1 | 1 | 2314-021 |
Safety valve | |||||||
24 -1 | safety valve 20 ø compl . 18 bar | 1.744 | 1 | 1 | 1 | 3137-012 | |
24 -2 | safety valve 20 ø compl. 21 bar | 1.750 | 1 | 1 | 1 | 3137-012 | |
24 -3 | safety valve 20 ø compl. 24 bar | 1.750 | 1 | 1 | 1 | 3137-011 | |
24 -4 | safety valve 15 ø compl. 18 bar | 0.670 | 1 | 3137-034 | |||
24 -5 | safety valve 15 ø compl. 21 bar | 0.670 | 1 | 3137-034 | |||
24 -6 | safety valve 15 ø compl. 24 bar | 0.670 | 1 | 2416-106 | |||
24A -1 | spring for valve 20 ø 12-18 bar | 0.108 | 1 | 1 | 1 | 2143-059 | |
24A -2 | spring for valve 20 ø 19-24 bar | 0.110 | 1 | 1 | 1 | 2143-063 | |
24A -4 | spring for valve 15 ø 12-24 bar | 0.120 | 1 | 2143-062 | |||
24B -1 | 0-ring for valve seat ø 34.5 x 3.5 | 0.002 | 1 | 1 | 1 | 1331-028 | |
24B -4 | 0-ring for valve seat ø 18.5 x 2.6 | 0.002 | 1 | 1331-017 | |||
24C -1 | 0-ring for cylinder ø 44.05 x 3.5 | 0.006 | 1 | 1 | 1 | 1331-065 | |
24C -4 | 0-ring for cylinder ø 25.07 x 2.5 | 0.004 | 1 | 1331-131 | |||
24D -1 | 0-ring for spindle ø 9.2 x 2.6 | 0.001 | 1 | 1 | 1 | 1 | 1331-011 |
24E -1 | 0-ring for cover ø 56.75 x 3.5 | 0.006 | 1 | 1 | 1 | 1331-069 | |
24E -4 | 0-ring for cover ø 32.99 x 2.6 | 0.004 | 1 | 1331-133 | |||
24F -1 | gasket for plug ø 34/27 x 1.5 | 0.002 | 1 | 1 | 1 | 1 | 2356-140 |
24G -1 | hexagon head screw M 6 x 25 | 0.006 | 4 | 4 | 4 | 1424-153 | |
24G -4 | hexagon head screw M 4 x 16 | 0.002 | 4 | 1424-135 | |||
24H -1 | spring washer ø 11.1/6.1 x 1.6 | 0.002 | 4 | 4 | 4 | 1437-022 | |
24H -4 | spring washer ø 7.1/4.1 x 0.9 | 0.001 | 4 | 1437-020 | |||
Pos. | Weight | Number each compr. | |||||
No. | Designation | Dim. | each | CMO | CMO | CMO | TCMO |
in kg | 14 | 16 | 18 | 18 | |||
Stop Valves | |||||||
Model 1983 with round top cover | |||||||
25 -1 | complete valve (discharge) | 40 ø | 1 | 1 | 1 | 1 | |
25 -2 | complete valve (inlet) | 50 ø | 1 | 1 | 1 | 1 | |
25A -1 | valve housing | (40 ø) | 1 | 1 | 1 | 1 | |
25A -2 | valve housing | (50 ø) | 1 | 1 | 1 | 1 | |
25B -1 | valve bonnet | (40-50 ø) | 1.762 | 2 | 2 | 2 | 2 |
25C -1 | front part for cone | (40-50 ø) | 0.098 | 2 | 2 | 2 | 2 |
25D -1 | rear part for cone | (40-50 ø) | 0.180 | 2 | 2 | 2 | 2 |
25E -1 | screw for valve cone | (40-50 ø) | 0.054 | 2 | 2 | 2 | 2 |
25F -1 | gasket for screw | (40-50 ø) | 0.002 | 2 | 2 | 2 | 2 |
25G -1 | threaded connection | (40-50 ø) | 0.180 | 2 | 2 | 2 | 2 |
25H -1 | sealing ring ø 62/45x3 | (40-50 ø) | 0.010 | 2 | 2 | 2 | 2 |
25J -1 | 0-ring for bonnet ø 75.8 x 3.5 | (40-50 ø) | 0.004 | 2 | 2 | 2 | 2 |
25K -1 | spindle | (40-50 ø) | 0.234 | 2 | 2 | 2 | 2 |
25L -1 | lock washer for spindle | (40-50 ø) | 0.010 | 2 | 2 | 2 | 2 |
25M -1 | packing gland comp.with 0-ring | (40-50 ø) | 0.152 | 2 | 2 | 2 | 2 |
25N -1 | guide pin ø 5 x 10 | (40-50 ø) | 0.002 | 2 | 2 | 2 | 2 |
25P -1 | 0-ring ø 21 .8 x 3.5 | (40-50 ø) | 0.002 | 2 | 2 | 2 | 2 |
25Q -1 | nylon washer 39.5/28 x 1.5 | (40-50 ø) | 0.002 | 2 | 2 | 2 | 2 |
25R -1 | 0-ring ø 17.12 x 3.5 | (40-50 ø) | 0.002 | 4 | 4 | 4 | 4 |
25S -1 | hand wheel ø 120 | (40-50 ø) | 0.164 | 2 | 2 | 2 | 2 |
25T -1 | screw for hand wheel | (40-50 ø) | 0.002 | 2 | 2 | 2 | 2 |
25U -1 | washer for hand wheel | (40-50 ø) | 0.004 | 2 | 2 | 2 | 2 |
25Y -1 | gasket for welding nipple | (40-50 ø) | 0.008 | 2 | 2 | 2 | 2 |
25Z -1 | screw valve/compressor M 12 x 120 | (40 ø) | 0.116 | 4 | 4 | 4 | 4 |
25Z -2 | screw valve/compressor M 14 x 120 | (50 ø) | 0.160 | 4 | 4 | 4 | 4 |
25AC-1 | counter flange | (40-50 ø) | 1.262 | 2 | 2 | 2 | 2 |
25AD-1 | welding nipple 40 ø | 0.992 | 1 | 1 | 1 | 1 | |
25AD-2 | welding nipple 50 ø | 0.856 | 1 | 1 | 1 | 1 | |
25AD-3 | welding nipple 65 ø | 0.838 | 1 | 1 | 1 | 1 | |
25AF-1 | threaded plug G 3/4" | (40 0) | 1 | 1 | 1 | 1 | |
25AG-1 | gasket valve/compressor | (40 0) | 0.014 | 1 | 1 | 1 | 1 |
25AG-2 | gasket valve/compressor | (50 0) | 0.018 | 1 | 1 | 1 | 1 |
25AH-1 | gasket for plug ø 34/27 x 1.5 | (40 0) | 0.008 | 1 | 1 | 1 | 1 |
25AJ-1 | screw bonnet/valve M 10 x 25 | (40-50 0) | 0.024 | 16 | 16 | 16 | 16 |
25AK-1 | screw for counterflange M 10 x 40 | (40-50 0) | 0.032 | 12 | 12 | 12 | 12 |
Suction and oil pressure gauge | |||||||
30 -1 | R 12/R 22 bar and °C | 0.700 | 1 | 1 | 1 | 1 | |
30 -2 | R 502 bar and °C | 0.700 | 1 | 1 | 1 | 1 | |
30 -3 | R717 | 0.700 | 1 | 1 | 1 | 1 | |
Pos. | Weight | Number each compr. | Part-No. | ||||
No. | Designation | each | CMO | CMO | CMO | TCMO | |
in kg | 14 | 16 | 18 | 18 | |||
Discharge pressure gauge | |||||||
31 -1 | R 12/R 22 bar and °C | 0.700 | 1 | 1 | 1 | 1541-191 | |
31 -2 | R 12/R 22 bar and °C | 0.700 | 1 | 1541-278 | |||
31 -3 | R 502 bar and °C | 0.700 | 1 | 1 | 1 | 1541-364 | |
31 -4 | R 502 bar and °C | 0.700 | 1 | 1541-366 | |||
31 -5 | R 717 bar and °C | 0.700 | 1 | 1 | 1 | 1541-050 | |
31 -6 | R 717 bar and °C | 0.700 | 1 | 1541-103 | |||
Bracket for gauge | |||||||
39 -1 | bracket | 1.000 | 1 | 1 | 1 | 1 | 3146-015 |
39A -1 | hexagon head screw M 5 x 10 | 0.002 | 4 | 4 | 4 | 4 | 1424-140 |
39B -1 | spring washer 5 mn | 0.002 | 4 | 4 | 4 | 4 | 1437-061 |
Parts for instruments | |||||||
41A -1 | gasket ø 19/14 x 1.5 | 0.001 | 6 | 6 | 6 | 8 | 2356-124 |
41B -1 | connecting piece (2 pipes) | 0.025 | 2 | 2 | 2 | 2 | 2333-012 |
41C -1 | plug for connecting piece | 0.040 | 3 | 3 | 3 | 4 | 2314-048 |
41D -1 | union nut (R 12 - R 22 - R 502) | 0.003 | 5 | 5 | 5 | 6 | 1376-010 |
41E -1 | union nut M 10 x 0.75 (R 717) | 0.010 | 5 | 5 | 5 | 6 | 1349-011 |
41F -1 | gasket ø 9/3x1 (R 717) | 0.001 | 5 | 5 | 5 | 6 | 2356-117 |
41H -1 | gasket ø 14.5/6 x 1,5 | 0.001 | 2 | 2 | 2 | 2 | 2356-120 |
41J -1 | connecting piece (1 pipe) | 0.015 | 1 | 2333-014 | |||
41Q -1 | pipe holder | 0.004 | 1 | 1 | 1 | 1 | 1377-096 |
41R -1 | cylinder head screw M 4 x 6 | 0.002 | 1 | 1 | 1 | 1 | 1412-200 |
41T -1 | pipe section with flare | 0.006 | 7 | 7 | 7 | 7 | 2333-016 |
41U -1 | connection piece (3 pipes) | 0.017 | 1 | 1 | 1 | 1 | 2333-013 |
Parts for mounting pressure control | |||||||
44A -1 | bracket for pressure controls | 0.600 | 1 | 1 | 1 | 1 | 2213-125 |
44B -1 | cylinderhead screw M 4 x 6 | 0.002 | 6 | 6 | 6 | 6 | 1412-200 |
44C -1 | counter sunk screw M 6 x 12 | 0.020 | 2 | 2 | 2 | 2 | 1413-090 |
44D -1 | spring washer ø 7.1/4 x 1 | 0.002 | 6 | 6 | 6 | 6 | 1437-020 |
Pressure and temperature controls | |||||||
for R 12 - R 22 - R 502 | |||||||
45A -1 | pressure control KP 1 | 0.326 | 1 | 1 | 1 | 1 | 1373-103 |
45B -1 | pressure control KP 15 | 0.532 | 1 | 1 | 1 | 1 | 1373-135 |
45C -2 | differential pressure control MP 55 | 0.864 | 1 | 1 | 1 | 1 | 1373-159 |
45D -1 | pressure control KP 5 | 0.330 | 1 | 1 | 1 | 1 | 1373-123 |
45H -1 | temperature control KP 77 | 0.466 | 1 | 1373-044 | |||
for R 717 | |||||||
45B -1 | pressure control KP 15 A | 0.754 | 1 | 1 | 1 | 1 | 1373-142 |
45C -1 | differential pressure control MP 55A | 0.978 | 1 | 1 | 1 | 1 | 1373-162 |
45C -1 | temperature control KP 98 | 0.674 | 1 | 1 | 1 | 1373-043 | |
45H -1 | temperature control KP 77 | 0.466 | 1 | 1373-044 | |||
45L -1 | phil pocket for temperature control | 0.162 | 1 | 1 | 1 | 2 | 1377-171 |
Coupling | |||||||
(Metalastic) | |||||||
48A -1 | metalastic coupling type 21/544 | 3.600 | 1 | 1 | 1 | 1 | 1524-024 |
48B -1 | bolt | 0.280 | 4 | 4 | 4 | 4 | 2111-055 |
48C -1 | plain washer 5/8" | 0.005 | 4 | 4 | 4 | 4 | 1436-038 |
48D -1 | self locking nut UNF 5/8" | 0.050 | 4 | 4 | 4 | 4 | 1433-118 |
(AMR 225) | |||||||
48A -2 | disc pack | 0.282 | 2 | 2 | 2 | 2 | 1524-155 |
48B -2 | bolt | 0.054 | 16 | 16 | 16 | 16 | 1524-163 |
48C -2 | bevel washer | 0.004 | 16 | 16 | 16 | 16 | 1524-179 |
48D -2 | lock nut | 0.006 | 16 | 16 | 16 | 16 | 1524-171 |
Crankcase heater | |||||||
57A -1 | crankcase heater 110V - 225W | 0.674 | 1 | 1 | 1 | 1 | 3181-019 |
57A -2 | crankcase heater 220V - 225W | 0.672 | 1 | 1 | 1 | 1 | 3181-016 |
57B -1 | gasket ø 34/27 x 1.5 | 0.002 | 1 | 1 | 1 | 1 | 2356-140 |
Bracket for oil filter | |||||||
59 -1 | bracket for oil filter complete | 1.698 | 1 | 1 | 1 | 1 | 3421-008 |
59A -1 | plate | 1.360 | 1 | 1 | 1 | 1 | 3421-009 |
59B -1 | pipe | 0.254 | 1 | 1 | 1 | 1 | 3421-010 |
59C -1 | locking strap | 0.014 | 2 | 2 | 2 | 2 | 3421-011 |
59D -1 | spring strap | 0.050 | 1 | 1 | 1 | 1 | 3421-013 |
59E -1 | circlip for shaft ø 38 DIN 471 | 0.006 | 1 | 1 | 1 | 1 | 1437-213 |
59G -1 | spring-ring | 0.002 | 1 | 1 | 1 | 1 | 3421-014 |
59H -1 | 0-ring ø 29.75 x 3.5 | 0.002 | 1 | 1 | 1 | 1 | 1331-025 |
59J -1 | hexagon head screw M 6 x 16 | 0.004 | 2 | 2 | 2 | 2 | 1424-151 |
S9K -1 | spring washer ø 6 nun | 0.004 | 2 | 2 | 2 | 2 | 1437-022 |
59L -1 | pointed screw M 10 x 60 | 0.028 | 2 | 2 | 2 | 2 | 1413-258 |
Oil filter | |||||||
60 -1 | oil filter complete | 2.870 | 1 | 1 | 1 | 1 | 4524-009 |
60A -1 | outer plate | 0.340 | 1 | 1 | 1 | 1 | 3422-056 |
60B -1 | inner plate | 0.275 | 1 | 1 | 1 | 1 | 3422-057 |
60C -1 | bottom | 0.215 | 1 | 1 | 1 | 1 | 3422-058 |
60D -1 | outer guard | 0.700 | 1 | 1 | 1 | 1 | 3424-027 |
60E -1 | inner guard | 0.340 | 1 | 1 | 1 | 1 | 3424-028 |
60F -1 | outer strainer | 0.180 | 1 | 1 | 1 | 1 | 3425-055 |
60G -1 | inner strainer | 0.120 | 1 | 1 | 1 | 1 | 3425-056 |
60H -1 | suction connection | 0.055 | 1 | 1 | 1 | 1 | 3424-032 |
60 J -1 | pipe nipple | 0.050 | 1 | 1 | 1 | 1 | 3424-031 |
60K -1 | distance pipe | 0.020 | 1 | 1 | 1 | 1 | 3424-034 |
60L -1 | support | 0.170 | 1 | 1 | 1 | 1 | 3424-029 |
oil filter continued: | |||||||
60M -1 | lock piece | 0.045 | 1 | 1 | 1 | 1 | 3421-012 |
60N -1 | rubber gasket 85 x 33 x 2 | 0.006 | 1 | 1 | 1 | 1 | 2353-116 |
60P -1 | rubber gasket ø 93/73 x 2 | 0.008 | 1 | 1 | 1 | 1 | 1334-036 |
60Q -1 | rubber gasket ø 82/66 x 2 | 0.006 | 1 | 1 | 1 | 1 | 1334-028 |
60R -1 | magnet filter | 0.130 | 1 | 1 | 1 | 1 | 3425-037 |
60S -1 | filter cartridge | 0.110 | 1 | 1 | 1 | 1 | 1517-060 |
60T -1 | counter sunk screw M 6 x 45 | 0.008 | 2 | 2 | 2 | 2 | 1413-098 |
60U -1 | hexagon head screw M 6 x 45 | 0.010 | 1 | 1 | 1 | 1 | 1424-157 |
60V -1 | nut M 6 | 0.004 | 1 | 1 | 1 | 1 | 1432-061 |
60X -1 | lock washer | 0.002 | 3 | 3 | 3 | 3 | 1437-063 |
60Y -1 | self-cutting screw 3/8 No 10 | 0.002 | 2 | 2 | 2 | 2 | 1414-170 |
60Z -1 | nut M 10 | 0.008 | 3 | 3 | 3 | 3 | 1432-039 |
60AA-1 | rubber gasket ø 30/13 x 8 | 0.006 | 2 | 2 | 2 | 2 | 2353-115 |
60AB-1 | 0-ring ø 7.65 x 1.78 | 0.005 | 3 | 3 | 3 | 3 | 1331-009 |
60AC-1 | 0-ring ø 25 x 3.5 | 0.012 | 1 | 1 | 1 | 1 | 1331-022 |
60AD-1 | rubber gasket ø 102/84 x 2 | 0.008 | 1 | 1 | 1 | 1 | 1334-037 |
oil pioes for unloading mechanism | |||||||
CMO 14 | |||||||
62A -1 | pipe with nipple and connecting piece | 0.200 | 1 | 3135-145 | |||
62B -1 | pipe with nipple and connecting piece | 0.138 | 1 | 3135-146 | |||
CMO 16 | |||||||
62A -2 | pipe with nipple and connecting piece | 0.114 | 1 | 3135-136 | |||
62B -2 | pipe with nipple and connecting piece | 0.126 | 1 | 3135-135 | |||
62C -2 | pipe with nipple and connecting piece | 0.134 | 1 | 3135-131 | |||
CMO 18 | |||||||
62A -3 | pipe with nipple and connecting piece | 0.108 | 1 | 3135-115 | |||
62B -3 | pipe with nipple and connecting piece | 0.126 | 1 | 3135-116 | |||
62C -3 | pipe with nipple and connecting piece | 0.090 | 1 | 3135-114 | |||
62D -3 | pipe with nipple and connecting piece | 0.140 | 1 | 3135-117 | |||
TCMO 18 | |||||||
62A -4 | pipe with nipple and connecting piece | 0.108 | 1 | 3135-115 | |||
62B -4 | pipe with nipple and connecting piece | 0.120 | 1 | 3135-144 | |||
62E -4 | plug | 0.024 | 1 | 3135-126 | |||
Joint pieces for oil pipes | |||||||
62F -1 | spirolox ring RS 50 | 0.002 | 4 | 4 | 4 | 4 | 1437-275 |
62G -1 | 0-ring ø 7.65 x 1.78 | 0.001 | 4 | 6 | 8 | 4 | 1331-009 |
62H -1 | 0-ring ø 9.25 x 1.78 | 0.001 | 4 | 4 | 4 | 4 | 1331-010 |
Oil separator CMO (R 22 - R 502) | |||||||
65 -1 | oil separator, complete | 1 | 1 | 1 | 4241-010 | ||
65A -1 | gasket valve/separator ø 100/62 x 1.5 | 0.014 | 1 | 1 | 1 | 2356-212 | |
65B -1 | gasket separator/compressor ø 100/62 x 1.5 | 0.014 | 1 | 1 | 1 | 2356-212 | |
65C -1 | hexagon head screw M 12 x 40 | 0.045 | 4 | 4 | 4 | 1424-217 | |
65D -1 | cover | 0.625 | 1 | 1 | 1 | 3411-007 | |
65E -1 | 0-ring for cover ø 82.15 x 3.5 | 0.004 | 1 | 1 | 1 | 1331-077 | |
65F -1 | hexagon head screw M 8 x 15 | 0.010 | 8 | 8 | 8 | 1424-166 | |
65G -1 | float valve unit | 0.200 | 1 | 1 | 1 | 1374-505 | |
65H -1 | distance ring | 0.002 | 1 | 1 | 1 | 2212-036 | |
65J -1 | socket head screw M 5 x 35 | 0.006 | 2 | 2 | 2 | 1413-334 | |
65K -1 | Union 1/4" | 0.016 | 1 | 1 | 1 | 1376-010 | |
65L -1 | pipe section with flare | 0.080 | 1 | 1 | 1 | 2322-016 | |
65M -1 | connecting piece (1 pipe) | 0.020 | 1 | 1 | 1 | 2333-014 | |
65N -1 | plug for connecting piece | 0.026 | 1 | 1 | 1 | 2314-048 | |
65P -1 | gasket for plug ø 19/14 x 1.5 | 0.002 | 2 | 2 | 2 | 2356-140 | |
Oil separator CMO R 717 | |||||||
65 -2 | oil separator, complete | 1 | 1 | 1 | 4241-070 | ||
65A -2 | oil separator 2107 D | 1 | 1 | 1 | 4241-151 | ||
65B -2 | oil strainer | 0.270 | 1 | 1 | 1 | 3425-077 | |
65C -2 | gasket for cover | 0.020 | 1 | 1 | 1 | 2355-108 | |
65D -2 | cover | 2.400 | 1 | 1 | 1 | 3254-069 | |
65E -2 | hexagon head screw M 12 x 35 | 0.040 | 6 | 6 | 6 | 1424-216 | |
65F -2 | gasket ø 18/10 x 1.5 | 0.006 | 3 | 3 | 3 | 2356-123 | |
65G -2 | threaded reducing socket G 1/4" - G 1/2" | 0.055 | 1 | 1 | 1 | 1349-077 | |
65H -2 | angel swivel screw joint G 1/4" for OD 10 mm> | 0.100 | 1 | 1 | 1 | 1349-089 | |
65J -2 | orifice d = 0.4 mm | 0.002 | 1 | 1 | 1 | 3142-033 | |
65K -2 | Union nut G 1/2" ø 14 mm | 0.100 | 1 | 1 | 1 | 2313-005 | |
65L -2 | threaded nipple 1/2" x 14 | 0.040 | 1 | 1 | 1 | 2314-005 | |
65M -2 | straight screw-in joint 1/4" NPT | 0.046 | 1 | 1 | 1 | 1349-060 | |
65N -2 | solenoid valve 220 V 50/60 Hz 9W | 0.625 | 1 | 1 | 1 | 1372-426 | |
65P -2 | straight screw-in joint G 1/4" | 0.055 | 1 | 1 | 1 | 1349-055 | |
65Q -2 | connecting piece for 1 pipe 6 mm | 0.025 | 1 | 1 | 1 | 2333-020 | |
65R -2 | plug for connecting piece | 0.025 | 1 | 1 | 1 | 2314-048 | |
65S -2 | gasket ø 19/14 x 1.5 | 0.004 | 2 | 2 | 2 | 2356-124 | |
65T -2 | stop valves type SW 40 | 1 | 1 | 1 | 2411-147 | ||
Oil separator TCMO (R 717 - R 22 - R 502 | |||||||
65 -3 | oil separator complete | 1 | 187-125 | ||||
65A -3 | gasket valve/separator ø 100/62 x 1.5 | 0.014 | 1 | 2353-212 | |||
65B -3 | gasket separator/compressor ø 100/62 x 1.5 | 0.014 | 1 | 2356-212 | |||
65C -3 | hexagon head screw M 12 x 40 | 0.046 | 4 | 1424-217 | |||
65D -3 | oil separator OVUR 1404 | 1 | 4241-103 | ||||
65E -3 | oil strainer | 0.270 | 1 | 3425-077 | |||
65F -3 | cover | 1 | 3254-066 | ||||
65G -3 | gasket for cover ø 139/94 x 1.5 | 0.020 | 1 | 2355-108 | |||
65H -3 | hexagon head screw M 12 x 30 | 0.032 | 6 | 1424-215 | |||
65J -3 | valve body | 0.156 | 1 | 3414-016 | |||
65K -3 | nozzle | 0,001 | 1 | 1377-355 | |||
65L -3 | needle | 0,002 | 1 | 1377-354 | |||
65M -3 | clamp | 0,006 | 1 | 2212-052 | |||
65N -3 | nozzle holder | 0,004 | 1 | 3413-033 | |||
65P -3 | distance ring | 0,009 | 2 | 2124-025 | |||
65Q -3 | shaft | 0,004 | 1 | 2121-012 | |||
65R -3 | shaft | 0,002 | 1 | 1526-060 | |||
65S -3 | spring | 0,004 | 1 | 1523-065 | |||
65T -3 | washer ø 7.3/4.3 x 0.5 | 0,002 | 2 | 1377-357 | |||
65U -3 | 0-ring | 0,002 | 1 | 1331-235 | |||
65V -3 | gasket | 0,001 | 1 | 2354-094 | |||
65X -3 | socket cap screw M 5 x 40 | 0,006 | 2 | 1413-335 | |||
65Y -3 | threaded plug | 0,028 | 1 | 2314-010 | |||
65Z -3 | gasket | 0,002 | 1 | 2356-206 | |||
65AA-3 | spacing washer | 0,004 | 2 | 1377-356 | |||
External suction filter | |||||||
only delivered on demand. | |||||||
66A -1 | end cover | 2.250 | 1 | 1 | 1 | 1 | 3422-003 |
66B -1 | gasket for end cover 130 x 130 x 1 | 0.020 | 1 | 1 | 1 | 1 | 2354-030 |
66C -1 | hexagon head screw M 12 x 45 | 0.050 | 4 | 4 | 4 | 4 | 1424-218 |
66D -1 | spring | 0.040 | 1 | 1 | 1 | 1 | 2143-006 |
66E -1 | dust strainer | 0.370 | 1 | 1 | 1 | 1 | 3425-059 |
66F -1 | filter bag | 0.030 | 1 | 1 | 1 | 1 | 3425-060 |
66G -1 | spring insert | 0.060 | 1 | 1 | 1 | 1 | 3424-007 |
66H -1 | gasket against valve and compressor | 0.020 | 1 | 1 | 1 | 1 | 2356-213 |
66J -1 | hexagon head screw M 14 x 45 | 0.070 | 4 | 4 | 4 | 4 | 1424-242 |
Injection system for TCMO | |||||||
83A -1 | guard | 0.968 | 1 | 3116-035 | |||
83B -1 | nipple | 0.156 | 1 | 3116-041 | |||
83C -1 | 0-ring ø 25 x 3.5 for 83 B | 0.012 | 1 | 1331-022 | |||
83D -1 | 0-ring ø 20.2 x 3.5 for 83 B | 0.009 | 1 | 1331-019 | |||
83E -1 | socket cap screw M 6 x 16 | 0.006 | 2 | 1413-340 | |||
83F -1 | spring washer 11.1/6.1 x 1.6 | 0.004 | 2 | 1437-022 | |||
83G -1 | stop valve ND 20 with oval flange | 1.800 | 1 | 2412-011 | |||
83H -1 | gasket for stop valve ø 44/33 x 1.5 | 0.002 | 1 | 2356-039 | |||
83J -1 | hexagon head screw M 12 x 40 | 0.045 | 2 | 1424-217 | |||
83K -1 | stop valve SG 6 | 0.540 | 1 | 2413-123 | |||
83L -1 | gasket for valve ø 18/10 x 1.5 | 0.006 | 2 | 2356-123 | |||
83M -1 | filter complete | 1 | 4522-007 | ||||
83N -1 | solenoid valve 220 V, 50 Hz, 16.5 W | 0.688 | 1 | 1372-046 | |||
83P -1 | injection valve TEAT 20-5 (R 22) | 2.460 | 1 | 1371-242 | |||
83P -2 | injection valve TEAT 20-2 (R 717) | 2.460 | 1 | 1371-240 | |||
Spec. spring for 83P-2 | 0.018 | 1 | 1523-070 | ||||
83Q -1 | solenoid valve for bypass | 0.822 | 1 | 1372-047 | |||
83R -1 | non-return valve for discharge pipe | 2.958 | 1 | 1372-249 | |||
Side cover with ASCO solenoid | |||||||
valves for capacity control | |||||||
belonging drawing 0662-117 | |||||||
86A -1 | side cover with oil level glass | 10.760 | 1 | 1 | 1 | 1 | 3113-134 |
86B -1 | gasket for side cover | 0.014 | 1 | 1 | 1 | 1 | 2353-102 |
86C -1 | hexagon head screw M 12 x 65 | 0.070 | 10 | 10 | 10 | 10 | 1424-059 |
86D -1 | hexagon head screw M 12 x 75 | 0.078 | 2 | 2 | 2 | 2 | 1424-061 |
86E -1 | oil level glass | 0.230 | 1 | 1 | 1 | 1 | 1226-015 |
86F -1 | 0-ring for oil level glass ø 52.07 x 2.62 | 0.002 | 1 | 1 | 1 | 1 | 1331-140 |
86G -1 | hexagon head screw M 6 x 18 | 0.006 | 4 | 4 | 4 | 4 | 1424-149 |
86H -1 | valve body with 3 complete valve | 5.524 | 1 | 1 | 1 | 1 | 3143-189 |
86 J -1 | gasket for valve body | 0.010 | 1 | 1 | 1 | 1 | 2353-150 |
86K -1 | hexagon head screw M 8 x 70 | 0.030 | 4 | 4 | 4 | 4 | 1424-042 |
86L -1 | 0-rings for one solenoid valve (4 pieces) | 0.002 | 3 | 3 | 3 | 3 | 3143-212 |
86M -1 | coil for solenoid valve 220 V, 50 Hz | 0.172 | 3 | 3 | 3 | 3 | 1372-105 |
86M -2 | coil for solenoid valve 120 V, 60 Hz | 0.190 | 3 | 3 | 3 | 3 | 1372-104 |
86N -1 | washer ø 24/13 x 2.5 | 0.006 | 12 | 12 | 12 | 12 | 1436-036 |
Side cover for unloaded start | |||||||
87A -1 | side cover with oil level glass | 10.760 | 1 | 1 | 1 | 1 | 3113-134 |
87B -1 | gasket for side cover | 0.014 | 1 | 1 | 1 | 1 | 2353-102 |
87C -1 | hexagon head screw M 12 x 65 | 0.070 | 10 | 10 | 10 | 10 | 1424-059 |
87D -1 | hexagon head screw M 12 x 75 | 0.078 | 2 | 2 | 2 | 2 | 1424-061 |
87G -1 | oil level glass | 0.230 | 1 | 1 | 1 | 1 | 1226-015 |
87H -1 | 0-ring for oil level glass ø 52.07 x 2.62 | 0.002 | 1 | 1 | 1 | 1 | 1331-140 |
87J -1 | hexagon head screw M 6 x 18 | 0.006 | 4 | 4 | 4 | 4 | 1424-149 |
87K -1 | cover for unloaded start | 0.805 | 1 | 1 | 1 | 1 | 3143-187 |
87L -1 | gasket for cover | 0.008 | 1 | 1 | 1 | 1 | 2353-149 |
87M -1 | hexagon head screw M 8 x 35 | 0.016 | 4 | 4 | 4 | 4 | 1424-170 |
87N -1 | washer ø 24/13 x 2.5 | 0.006 | 12 | 12 | 12 | 12 | 1436-036 |
Spare parts for CMO 24-26-28 & TCMO 28
Spare parts for CMO 24-26-28 & TCMO 28 | |||||||
CMO 24-28 | TCMO 28 | ||||||
Drawings for the compressor | 0662-213 | 0662-214/217 | |||||
Cylinder liner | 0662-212 | ||||||
Pos. | Designation | Weight each in kg | Number each compressor | Part no. | |||
CMO 24 | CMO 26 | CMO 28 | TCMO 28 | ||||
Compressor frame | |||||||
1A-1 | Frame CMO 24 | 1 | 3111-076 | ||||
1A-2 | Frame CMO 26 | 1 | 3111-077 | ||||
1A-3 | Frame CMO 28 | 1 | 3111-078 | ||||
1A-4 | Frame TCMO 28, int. IP connection | 1 | 3111-079 | ||||
1A-4 | Frame TCMO 28, ext. IP connection | 1 | 3111-088 | ||||
1B-1 | Non return valve | 0.400 | 1 | 1 | 1 | 1 | 2415-031 |
1C-1 | Hexagon plug G 3/4" with collar | 0.065 | 1 | 1 | 1 | 1 | 2314-027 |
1D-1 | Gasket for plug dia. 34/27 x 1,5 | 0.002 | 1 | 1 | 1 | 1 | 2356-140 |
1E-1 | Hexagon plug with collar G 1/2" | 0.128 | 1 | 1 | 1 | 1 | 2314-026 |
1F-1 | Gasket for plug dia. 27/21 x 1,5 | 0.008 | 1 | 1 | 1 | 1 | 2356-133 |
Top cover - air cooled | |||||||
2A-1 | Top cover | 2.960 | 2 | 3 | 4 | 4 | 3113-198 |
2B-1 | Gasket for top cover | 0.012 | 2 | 3 | 4 | 4 | 2353-190 |
2C-1 | Hexagon head M12 x 70 | 0.080 | 24 | 36 | 48 | 48 | 1424-061 |
2D-1 | Washer dia. 24/13x2,5 | 0.006 | 24 | 36 | 48 | 48 | 1436-036 |
Top cover - water cooled (see sketch below) | |||||||
2A-1 | Top cover | 2 | 3 | 4 | 4 | 3113-198 | |
2B-1 | Gasket for top cover | 0.012 | 2 | 3 | 4 | 4 | 2353-101 |
2C-3 | Hexagon head screw M12 x 90 | 0.092 | 24 | 36 | 48 | 48 | 1424-064 |
2D-3 | Washer dia. 24/13x2,5 | 0.006 | 24 | 36 | 48 | 48 | 1436-036 |
2K-3 | Water cover | 2 | 3 | 4 | 4 | 3113-166 | |
2L-3 | Gasket for water cover | 0.012 | 2 | 3 | 4 | 4 | 2353-172 |
2M-3 | Hexagon head screw M8 x 30 | 0.014 | 4 | 6 | 8 | 8 | 1424-169 |
2N-3 | Chamfered washer dia, 17/8,4 x 1,6 | 0.002 | 4 | 6 | 8 | 8 | 1436-034 |
2P-3 | Rubber cord dia. 10 x 220 | 0.015 | 2 | 3 | 4 | 4 | 1323-077 |
Side cover with oil level glass | |||||||
3A-1 | Side cover - air cooled | 6.830 | 1 | 1 | 1 | 1 | 3113-099 |
3B-1 | Gasket for side cover | 0.012 | 1 | 1 | 1 | 1 | 2353-190 |
3C-1 | Hexagon head screw M12 x 65 | 0.070 | 12 | 12 | 12 | 12 | 1424-059 |
3D-1 | Washer dia. 24/13x2,5 | 0.006 | 12 | 12 | 12 | 12 | 1436-036 |
3G-1 | Oil level glass | 0.220 | 1 | 1 | 1 | 1 | 1226-015 |
3H-1 | O-ring dia. 52,07x2,62 | 0.002 | 1 | 1 | 1 | 1 | 1331-140 |
3J-1 | Hexagon head screw M6 x 18 | 0.004 | 4 | 4 | 4 | 4 | 1424-148 |
Side cover - water cooled | |||||||
3A-2 | Side cover | 1 | 1 | 1 | 1 | 3113-167 | |
3B-2 | Gasket for side cover | 0.012 | 1 | 1 | 1 | 1 | 2353-172 |
3C-2 | Hexagon head screw M12 x 50 | 0.052 | 12 | 12 | 12 | 12 | 1424-219 |
3D-2 | Washer for dia. 24/13 x 2,5 | 0.006 | 12 | 12 | 12 | 12 | 1436-036 |
3K-2 | Water cover | 1 | 1 | 1 | 1 | 3113-166 | |
3L-2 | Gasket for water cover | 1 | 1 | 1 | 1 | 2353-172 | |
3M-2 | Hexagon head screw MS x 25 | 0.014 | 2 | 2 | 2 | 2 | 1424-168 |
3N-2 | Washer for M8 | 0.002 | 2 | 2 | 2 | 2 | 1436-034 |
3P-2 | Rubber cord dia. 10 x 220 | 0.015 | 1 | 1 | 1 | 1 | 1323-077 |
End cover at pump | |||||||
4A-1 | End cover at pump - CMO | 34.500 | 1 | 1 | 1 | 3113-006 | |
4A-2 | End cover at pump - TCMO int. IP | 34.500 | 1 | 3113-112 | |||
4A-2 | End cover at pump - TCMO ext- iP | 34.500 | 1 | 3113-214 | |||
4B-1 | Gasket for end cover - CMO | 0.050 | 1 | 1 | 1 | 2353-105 | |
4B-2 | Gasket for end cover - TCMO int. JP | 0.056 | 1 | 2353-142 | |||
48-2 | Gasket for end cover - TCMO ext. IP | 0.056 | 1 | 2353-182 | |||
4C-1 | Hexagon head screw M14 x 110 | 0.148 | 14 | 14 | 14 | 14 | 1424-087 |
4D-1 | Hexagon head screw M14 x 120 | 0.160 | 2 | 2 | 2 | 2 | 1424-090 |
4E-1 | Washer dia. 23/16x3 | 0.008 | 18 | 18 | 18 | 18 | 1436-037 |
Bearing cover al pump | |||||||
5A-1 | Bearing cover | 1 | 1 | 1 | 1 | 3113-168 | |
5B-1 | Gasket 0,3 mm | 0.007 | 1 | 1 | 1 | 1 | 2353-166 |
5B-2 | Gasket 0,5 mm | 0.010 | 1 | 1 | 1 | 1 | 2353-167 |
5B-3 | Gasket 0,8 mm | 0.016 | 1 | 1 | 1 | 1 | 2353-168 |
5B-4 | Gasket 1,0 mm | 0.020 | 1 | 1 | 1 | 1 | 2353-169 |
5C-1 | Hexagon head screw M10x40 | 0.032 | 8 | 8 | 8 | 8 | 1424-194 |
5E-1 | Main bearing bushing | 1 | 1 | 1 | 1 | 2132-086 | |
5E-2 | Main bearing bushing for repair -0,5 mm undersize | 1 | 1 | 1 | 1 | 2132-088 | |
Bearing cover at shaft end | |||||||
6A-1 | Bearing cover at shaft end | 1 | 1 | 1 | 1 | 3113-169 | |
6B-1 | Gasket 0,5 mm | 0.010 | 1 | 1 | 1 | 1 | 2353-167 |
6C-1 | Hexagon head screw M10x35 | 0.030 | 7 | 7 | 7 | 7 | 1424-193 |
6D-1 | Haxagon head screw M10x50 | 1 | 1 | 1 | 1 | 1424-196 | |
6E-1 | Main bushing | 1 | 1 | 1 | 1 | 2132-086 | |
6E-2 | Main bushing for repair -0,5 mm undersize | 1 | 1 | 1 | 1 | 2132-088 | |
End cover al shaft end | |||||||
7A-1 | End cover | 1 | 1 | 1 | 1 | 3113-172 | |
7B-1 | Gasket for end cover | 0.022 | 1 | 1 | 1 | 1 | 2353-104 |
7C-1 | O-ring dia. 132,7x 7 | 0.024 | 1 | 1 | 1 | 1 | 1331-050 |
7D-1 | Hexagon head screw M14 x 90 | 0.126 | 14 | 14 | 14 | 14 | 1424-083 |
7E-1 | Hexagon head screw M14 x 160 | 0.208 | 2 | 2 | 2 | 2 | 1424-095 |
7F-1 | Was her dia. 28/15x3 | 0.008 | 16 | 16 | 16 | 16 | 1436-037 |
7G-1 | Dust strainer | 0.818 | 1 | 1 | 1 | 1 | 3425-057 |
7H-1 | Gasket for dust strainer dia. 326 x 8 | 0.074 | 1 | 1 | 1 | 1 | 2353-118 |
7J-1 | Hexagon head screw M5 x 10 | 0.002 | 8 | 8 | 8 | 8 | 1424-140 |
7K-1 | Lock washer dia. 10,5/5,3 x 0,6 | 0.002 | 8 | 8 | 8 | 8 | 1437-061 |
Delivery oil pipe - internal | |||||||
9A-1 | Oil pipe CMO 24 | 0.294 | 1 | 3141-148 | |||
9A-2 | Oil pipe CMO 26 | 0.300 | 1 | 3141-149 | |||
9A-3 | Oil pipe CMO/TCMO 28 | 0.310 | 1 | 1 | 3141-150 | ||
9B-1 | O-ring dia. 13,5x2,62 | 0.003 | 4 | 4 | 4 | 4 | 1331-017 |
9C-1 | Thrust ring | 0.004 | 2 | 2 | 2 | 2 | 2353-020 |
Shaft seal type SB CMO | |||||||
Spare parts kit: | 1 | 1 | 1 | 1 | 3126-165-3 | ||
Consist of: | |||||||
10A-1 | Slide ring, steel | 1 | 1 | 1 | 3126-162 | ||
10B-1 | Slide ring, carbon | 1 | 1 | 1 | 1 | 3126-158 | |
10C-1 | O-ring dia.53.57x 3,53 | 0.002 | 1 | 1 | 1 | 1 | 1331-068 |
10D-1 | O-ring dia. 63,09 x 3,53 | 0.004 | 1 | 1 | 1 | 1 | 1331-071 |
10G-1 | Hex. socket screw M5 x 16 | 0.004 | 4 | 4 | 4 | 4 | 1413-331 |
Allen key NV-4x90x90 | 1 | 1 | 1 | 1 | 1612-392 | ||
Mounting instruction | 0171-949 | ||||||
Shaft seal complete for CMO/TCMO | 1 | 1 | 1 | 1 | 3126-180 | ||
Consist of: | |||||||
8A-1 | Cover for shaft seal | 1 | 1 | 1 | 1 | 3113-170 | |
8B-1 | O-ring dia. 98,02 x 3.53 | 1 | 1 | 1 | 1 | 1331-081 | |
8C-1 | Hex. head screw M8 x 30 | 5 | 5 | 5 | 5 | 1424-169 | |
8D-1 | Spring washer dia. 14,2 /8,2 x 2 | 5 | 5 | 5 | 5 | 1437-023 | |
8E-1 | Locking ring | 1 | 1 | 1 | 1 | 3126-164 | |
8F-1 | Cylindrical pin | 1 | 1 | 1 | 1 | 1446-081 | |
10A-1 | Slide ring, steel | 1 | 1 | 1 | 1 | 3126-162 | |
10B-1 | SIrde ring, carbon | 1 | 1 | 1 | 1 | 3126-158 | |
10C-1 | O-ring dia. 53,57 x 3,53 | 1 | 1 | 1 | 1 | 1331-068 | |
10D-1 | O-ring dia. 63,09x3,53 | 1 | 1 | 1 | 1 | 1331-071 | |
10F-1 | Retaining flange | 1 | 1 | 1 | 1 | 3126-161 | |
10G-1 | hex. socket screw M5 x 16 | 4 | 4 | 4 | 4 | 1413-331 | |
10H-1 | Locking ring | 1 | 1 | 1 | 1 | 3126-163 | |
10K-1 | Spring - DC5 x 32 x dia. 1 | 8 | 8 | 8 | 8 | 2142-058 | |
OS pump | |||||||
11-1 | Oil pump complete *) | 1 | 1 | 1 | 1 | 3141-154 | |
11A-1 | Gasket pump housing/cover | 1 | 1 | 1 | 1 | 2353-170 | |
11B-1 | Socket cap screw M8 x 60 | 0.018 | 4 | 4 | 4 | 4 | 1413-364 |
11C-1 | Pump housing | 1 | 1 | 1 | 1 | ||
11D-1 | Cover for pump | 1 | 1 | 1 | 1 | ||
11E-1 | O-ring dia. 75,8 x 3,5 | 0.004 | 1 | 1 | 1 | 1 | 1331-075 |
11F-1 | Socket cap screw M6 x 16 | 0.006 | 4 | 4 | 4 | 4 | 1413-340 |
11G-1 | Cylindrical pin dia. 6 x 36 | 2 | 2 | 2 | 2 | 1445-061 | |
11J-1 | Gear wheel | 1 | 1 | 1 | 1 | ||
11K-1 | Gear wneei | 1 | 1 | 1 | 1 | ||
11L-1 | Grooved pin dia. 6 x 24 DIN 1475 | 1 | 1 | 1 | 1 | 1446-032 | |
11M-1 | Dog clutch | 1 | 1 | 1 | 1 | 2125-298 | |
11N-1 | Bushing for dog clutch - nylon | 2 | 2 | 2 | 2 | 2132-087 | |
Unloading mechanism | |||||||
12-1 | Unloading mechanism complete | 4 | 4 | 8 | 4 | 3135-172 | |
12A-1 | Socket cap screw M5 x 20 | 0.004 | 8 | 12 | 16 | 8 | 1413-332 |
12B-1 | Spring washer | 0.002 | 8 | 12 | 13 | 8 | 1437-061 |
12C-1 | Bottom part | 4 | 6 | 8 | 4 | 3135-163 | |
12D-1 | Unloading piston | 4 | 6 | 8 | 4 | 3135-169 | |
12E-1 | Unloading cylinder | 4 | 6 | 8 | 4 | 3135-170 | |
12F-1 | Spring | 64 | 84 | 128 | 64 | 2142-052 | |
12G-1 | Sealing ring | 4 | 6 | 8 | 4 | 1332-113 | |
12H-1 | Sealing ring | 4 | 6 | 8 | 4 | 1332-114 | |
12J-1 | Locking ring | 4 | 6 | 8 | 4 | 3135-171 | |
*) If the oil pump is faulty, the entire pump must be replaced | |||||||
Crank shaft | |||||||
16-1 | Crank shaft CMO 24 complete | 1 | 3121-195 | ||||
16-2 | Crank shaft CMO 26 complete | 1 | 3121-196 | ||||
16-3 | Crank shaft CMO/TCMO 28 | 1 | 1 | 3121-197 | |||
16C-1 | Key 14 x 9 x 40 | 0.034 | 1 | 1 | 1 | 1 | 2123-003 |
16D-1 | Pjainwasher | 0.245 | 1 | 1 | 1 | 1 | 2125-040 |
16E-1 | Hexagon head screw M14 x 40 | 0.070 | 1 | 1 | 1 | 1 | 1424-141 |
16F-1 | Spring washer dia. 23/14x3 | 0.006 | 1 | 1 | 1 | 1 | 1437-030 |
16G-1 | Spray ring | 0.004 | 1 | 1 | 1 | 1 | 1437-290 |
16H-1 | Plug | 0.002 | 3 | 3 | 3 | 3 | 1413-250 |
16J-1 | Grooved pin DIN 1474 | 0.015 | 2 | 2 | 2 | 2 | 1446-031 |
Connecting rod -for CMO and TCMO LP | |||||||
17-1 | Connecting rod complete with bolts | 4 | 6 | 8 | 6 | 3123-076 | |
17-2 | Connecting rod complete undersize | 4 | 6 | 8 | 6 | 3123-078 | |
17C-1 | Bolt for connecting rod | 0.030 | 8 | 12 | 16 | 12 | 2111-004 |
17H-1 | Self locking nut UNF 5/16" | 0.006 | 8 | 12 | 16 | 12 | 1433-115 |
17J-1 | Chamfered washer dia. 17/8,4 x 1,6 | 0.008 | 8 | 12 | 16 | 12 | 1436-034 |
Connecting rod -for TCMO HP needle bearing | |||||||
17-3 | Connecting rod complete wrth bolts | 2 | 3123-077 | ||||
17-4 | Connectino rod complete undersize | 2 | 3123-079 | ||||
17C-1 | Bolts for connection rod | 0.030 | 4 | 2111-004 | |||
17H-1 | Self locking nut UNF 5/16" | 0.006 | 4 | 1433-115 | |||
17J-1 | Chamfered washer dia. 17/8,4 x 1,6 | 0.008 | 4 | 1436-034 | |||
17K-1 | Needle bearing | 2 | 1511-272 | ||||
Piston | |||||||
18-1 | Piston with pin and rings | 4 | 6 | 8 | 8 | 3124-062 | |
18A-1 | Piston pin | 4 | 6 | 8 | 8 | 3125-122 | |
18C-1 | Piston ring | 4 | 6 | 8 | 8 | 3125-129 | |
18D-1 | Oil scraper ring | 4 | 6 | 8 | 8 | 3125-124 | |
18E-1 | Circlip for bore dia. 22 | 8 | 12 | 16 | 16 | 1437-138 | |
Cylinder liner with suction valve - See drawing 0662-212 | |||||||
19-1 | Cylinder liner complete - CMO and TCMO LP- R717 for capacity regulation | 4 | 6 | 3 | 4 | 3112-077 | |
19-2 | Cylinder liner complete- TCMO LP/HP- R717 without capacity regulation | 4 | 3112-079 | ||||
19-4 | Cylinder liner complete- CMO and TCMO LP- HFC for capacity regulation | 4 | 6 | 8 | 4 | 3112-076 | |
19-5 | Cylinder liner complete- TCMO LP/HP-HFC/HCFC without capacity regulation | 4 | 3112-078 | ||||
19A-1 | Cylinder liners LP/HP -R717/HFC/HCFC | 4 | 6 | 8 | 8 | 3112-075 | |
19B-1 | Unloading pin | 24 | 36 | 48 | 36 | 2122-023 | |
19C-1 | Spring for unfoadng pin | 24 | 36 | 48 | 36 | 2142-034 | |
19F-1 | Ring plate for suction valve | 4 | 6 | 8 | 8 | 3131-072 | |
19G-1 | Valve spring | 16 | 24 | 32 | 32 | 2141-047 | |
19H-1 | Suction valve retaining plate R717 | 4 | 6 | 8 | 8 | 3132-075 | |
19H-2 | Suction valve retaining plate HFC | 4 | 6 | 8 | 8 | 3132-073 | |
19J-1 | Socket cap screw M5 x 25 | 24 | 36 | 48 | 48 | 1413-333 | |
19K-1 | Gasket 0,5 mm | 4 | 6 | 8 | 8 | 2356-288 | |
19K-2 | Gasket 0.8 mm | 4 | 6 | 8 | 8 | 2356-289 | |
19M-1 | O-ring dia. 72,69 x 2,62 | 2 | 1331-147 | ||||
Discharge valve | |||||||
20-1 | Discharge valve complete R717 | 4 | 6 | 8 | 8 | 3136-080 | |
20-2 | Discharge valve complete HFC/HCFC | 4 | 6 | 8 | 8 | 3136-079 | |
20A-1 | Valve seat | 4 | 6 | 8 | 8 | 3133-008 | |
20B-1 | Valve retaining plate R717 | 4 | 6 | 8 | 8 | 3132-074 | |
20B-2 | Valve retaining plate HFC/HCFC | 4 | 6 | 8 | 8 | 3132-072 | |
20C-1 | Ring plate for discharge valve | 4 | 6 | 8 | 8 | 3131-006 | |
20D-1 | Counter sunk screw M8 x 40 | 4 | 6 | 8 | 8 | 1413-106 | |
20E-1 | Nut M8 | 8 | 12 | 16 | 16 | 1432-063 | |
20F-1 | Spring guide | 4 | 6 | 8 | 8 | 2145-011 | |
20H-1 | Valve spring | 24 | 36 | 48 | 48 | 2141-047 | |
20J-1 | Spring washer | 4 | 6 | 8 | 8 | 1437-054 | |
Spring for safety head | |||||||
21 | Spring | 4 | 5 | 8 | 8 | 2142-059 | |
Oil pressure valve | |||||||
21-1 | Oil pressure valve - complete | 0.450 | 1 | 1 | 1 | 1 | 3142-150 |
22A-1 | Gasket | 0.001 | 1 | 1 | 1 | 1 | 2354-075 |
Oil charging valve for HFC/HCFC refrigerant | |||||||
23-1 | Oil charging valve | 0.300 | 1 | 1 | 1 | 1 | 1374-132 |
23A-1 | Union nut 3/4" flare | 0.005 | 1 | 1 | 1 | 1 | 1376-012 |
23B-1 | Seal cap 1/2" | 0.002 | 1 | 1 | 1 | 1 | 1376-042 |
23C-1 | Bushing G 3/4" x G 3/8" | 0.140 | 1 | 1 | 1 | 1 | 2312-007 |
23D-1 | Gasket dia. 34/27x1,5 | 0.001 | 1 | 1 | 1 | 1 | 2356-140 |
for B717 refrigerant | |||||||
23A-2 | Oil charging valve - complete | 0.300 | 1 | 1 | 1 | 1 | 2412-585 |
23B-2 | Threaded reducing nipple | 0.155 | 1 | 1 | 1 | 1 | 2311-059 |
23C-2 | Socket | 0.075 | 1 | 1 | 1 | 1 | 2313-035 |
23D-2 | Gasket | 0.001 | 1 | 1 | 1 | 1 | 2356-123 |
23E-2 | Gasket | 0.001 | 1 | 1 | 1 | 1 | 2356-140 |
23F-2 | Gasket | 0.001 | 1 | 1 | 1 | 1 | 2356-283 |
23G-2 | Nut | 0.060 | 1 | 1 | 1 | 1 | 2313-027 |
By-pass valve | |||||||
24-1 | By-pass valve dia. 20 24 bar | 2.400 | 1 | 1 | 1 | 3137-011 | |
24-2 | By-pass valve dia. 20 22 bar | 2.400 | 1 | 1 | 1 | 3137-012 | |
24-3 | By-pass valve dia. 10 24 bar | 0.850 | 1 | 3137-013 | |||
24-4 | By-pass valve dia. 10 22 bar | 0.850 | 1 | 3137-034 | |||
24C-1 | O-ring for cylinder dia. 44.05 x 3,5 | 0.006 | 1 | 1 | 1 | 1331-065 | |
24C-4 | O-ring for cylinder dia. 25,07 x 2,5 | 0.004 | 1 | 1331-131 | |||
24E-1 | O-ring for cover dia. 56,75 x 3,5 | 0.006 | 1 | 1 | 1 | 1331-069 | |
24 E-4 | O-ring for cover dia. 32,99 x 2,6 | 0.004 | 1 | 1331-133 | |||
24G-1 | Hexagon head screw M6 x 25 | 0.006 | 5 | 5 | 5 | 1424-153 | |
24G-4 | Hexagon head screw M4 x 16 | 0.002 | 5 | 1424-135 | |||
24H-1 | Spring washer dia. 11,1/6,1 x 1,6 | 0.002 | 5 | 5 | 5 | 1437-022 | |
24H-4 | Spring washer dia. 7,1/4,1 x0,9 | 0.001 | 5 | 1437-020 | |||
Pos. | Designation | Valve dim. dia. | Weight each in kg | Number each valve | Part no. | ||
Slop valve | |||||||
25-1 | Complete valve - discharge | 40 | 1 | 2414-066 | |||
25-2 | complete valve - suctron | 50 | 1 | 2414-067 | |||
25A-1 | Valve housing | 40 | 1 | 2432-156 | |||
25A-2 | Valve housing | 50 | 1 | 2432-157 | |||
25B-1 | Valve bonnet | 40-50 | 1.760 | 1 | 2433-028 | ||
25C-1 | Front part tor cone | 40-50 | 0.098 | 1 | 2444-090 | ||
25D-1 | Rear part for cone | 40-50 | 0.180 | 1 | 2444-091 | ||
25E-1 | Screw for cone | 40-50 | 0.054 | 1 | 2444-017 | ||
25F-1 | Gasket for scraw | 40-50 | 0.002 | 1 | 2356-138 | ||
25G-1 | Threaded connection | 40-50 | 0.180 | 1 | 2445-053 | ||
25H-1 | Sealing ring dia. 62/45 x 3 | 40-50 | 0.010 | 1 | 2354-003 | ||
25J-1 | O-ring for bonnet dia. 72,4 x 5,3 | 40-50 | 0.010 | 1 | 1331-154 | ||
25K-1 | Spindle | 40-50 | 0.234 | 1 | 2442-023 | ||
25L-1 | Lock washer | 40-50 | 0.010 | 1 | 2445-019 | ||
25M-1 | Packing gland complete with o-rings | 40-50 | 0.152 | 1 | 2452-132 | ||
25N-1 | Guide pin dia.Sx 10 | 40-50 | 0.002 | 1 | 1446-085 | ||
25P-1 | O-ring dia. 21,8x3,5 | 40-50 | 0.002 | 1 | 1331-020 | ||
25Q-1 | Nylon washer dia. 39,5/28 x 1,5 | 40-50 | 0.002 | 1 | 2354-018 | ||
25R-1 | O-ring dia. 17,12x3,5 | 40-50 | 0.002 | 2 | 1331-016 | ||
25S-1 | Hand wheel d]a. 120 | 40-50 | 0.164 | 1 | 1365-036 | ||
25T-1 | Screw ior hand wheel | 40-50 | 0.002 | 1 | 1424-140 | ||
25U-1 | Washer for hand wheel | 40-50 | 0.004 | 1 | 1436-024 | ||
25Y-1 | Gasket for welding nipple | 40-50 | 0.008 | 1 | 2356-087 | ||
25Z-1 | Screw valve/corn pres&or Ml 2 it 130 | 40 | 0.116 | 4 | 1424-072 | ||
25Z-2 | Screw valve/compressor M14 x 130 | 50 | 0.160 | 4 | 1424-091 | ||
25AC-1 | Counter flange | 40-50 | 1.162 | 6 | 2344-091 | ||
25AD-1 | Welding nipple dia. 40 | 0.992 | 6 | 2322-100 | |||
25AD-2 | Welding nipple dia. 50 | 0.856 | 6 | 2322-102 | |||
25AD-3 | Welding nipple dia. 65 | 0.838 | 6 | 2322-103 | |||
25AG-1 | Gasket valve/compressor | 40 | 0.014 | 6 | 2356-212 | ||
25AG-2 | Gasket valve/compressor | 50 | 0.018 | 6 | 2356-213 | ||
25AJ-1 | Screw bonnet/valve Ml 0 x 25 | 40-50 | 0.024 | 8 | 1424-191 | ||
25AK-1 | Screw tor counter flange M10 x 40 | 40-50 | 0.032 | 6 | 1424-194 | ||
Pos. | Designation | Weight each in kg | Number each compressor | Part no. | |||
CMO 24 | CMO 26 | CMO 28 | TCMO 28 | ||||
Suction and oil pressure gauge | |||||||
30-1 | R12/R22 bar and °C | 0.700 | 1 | 1 | 1 | 1 | 1541-251 |
30-2 | R502 bar and °C | 0.700 | 1 | 1 | 1 | 1 | 1541-365 |
30-3 | R717 bar and °C | 0.700 | 1 | 1 | 1 | 1 | 1541-109 |
30-4 | R134a/R404A bar and °C | 0.700 | 1 | 1 | 1 | 1 | 1541-071 |
Discharge pressure gauge | |||||||
31-1 | R12/R22bar and °C HP | 0.700 | 1 | 1 | 1 | 1541-191 | |
31-2 | R12/R22 bar and °C IP-HP | 0.700 | 1 | 1541-278 | |||
31-3 | R502 bar and °C HP | 0.700 | 1 | 1 | 1 | 1541-364 | |
31-4 | R502 bar and °C IP-HP | 0.700 | 1 | 1541-366 | |||
31-5 | R717 bar and °C C HP | 0.700 | 1 | 1 | 1 | 1541-050 | |
31-6 | R717 bar and °C IP-HP | 0.700 | 1 | 1541-103 | |||
31-7 | R134a/R404A bar and °C HP | 0.700 | 1 | 1 | 1 | 1541-072 | |
31-8 | R134a/R404A bar and °C IP-HP | 0.700 | 1 | 1541-073 | |||
Bracket for gauge | |||||||
39-1 | Bracket | 1.000 | 1 | 1 | 1 | 1 | 3146-015 |
39A-1 | Hexagon head screw M5 x 6 | 0.002 | 4 | 4 | 4 | 4 | 1424-140 |
39B-1 | Spring washer | 0.002 | 4 | 4 | 4 | 4 | 1437-061 |
Cooling water connections | |||||||
40A-1 | Set of hoses for cooling water 4 cyl. | 1 | 3185-108 | ||||
40A-2 | Set of hoses tor cooling water 6 cyl. | 1 | 3185-109 | ||||
40A-3 | Set of hoses for cooling water 8 cyl. | 1 | 1 | 3185-110 | |||
40B-1 | Hose of connection 3/8" - straight | 0.004 | 10 | 12 | 14 | 14 | 2334-025 |
40C-1 | Angle - 3/8" | 0.009 | 6 | 8 | 8 | 8 | 1341-090 |
40D-1 | T-piece | 0.015 | 2 | 2 | 2 | 2 | 1341-141 |
40C-1 | Hose clamp | 0.015 | 10 | 12 | 14 | 14 | 1345-16S |
40F-1 | Cable binder | 3 | 3 | 3 | 3 | 1554-062 | |
Parts for instruments | |||||||
41A-1 | Gasket dia. 19/14x1.5 | 0.001 | 6 | 6 | 6 | 8 | 2356-124 |
41B-1 | Connecting piece - 2 pipes | 0.025 | 2 | 2 | 2 | 2 | 2333-012 |
41C-1 | Plug tor connecting piece | 0.040 | 3 | 3 | 3 | 4 | 2314-048 |
41D-1 | Union nut - R12 - R22 - R502 | 0.003 | 5 | 5 | 5 | 6 | 1376-010 |
41E-1 | Union nut M10x 0,75- R717 | 0.010 | 5 | 5 | 5 | 6 | 1349-011 |
41F-1 | Gasket dia. 9/3 x 1 -R717 | 0.001 | 5 | 5 | 5 | 6 | 2356-117 |
41H-1 | Gasket dia. 14,5/6x1,5 | 0.001 | 2 | 2 | 2 | 2 | 2356-120 |
41J-1 | Connecting piece -1 pipe | 0.015 | 1 | 2333-014 | |||
41Q-1 | Pipe holder | 0.004 | 1 | 1 | 1 | 1 | 1377-096 |
41P-1 | Cylinder head screw M4 x 6 | 0.002 | 1 | 1 | 1 | 1 | 1412-200 |
41T-1 | Pipe section with tlare | 0.006 | 7 | 7 | 7 | 7 | 2333-016 |
41U-1 | Connecting piece - 3 pipes | 0.017 | 1 | 1 | 1 | 1 | 2333-013 |
Purge valve | |||||||
42A-1 | Purge valve complete | 0.300 | 1 | 1 | 1 | 1 | 2412-585 |
42B-1 | Threaded nipple | ||||||
42C-1 | Cutting ring | 0.135 | 1 | 1 | 1 | 1 | 1349-062 |
42D-1 | Nut | ||||||
42E-1 | Nut | 0.070 | 1 | 1 | 1 | 1 | 2313-045 |
42F-1 | Connection pipe with collar | 0.025 | 1 | 1 | 1 | 1 | 2334-027 |
42G-1 | Gasket | 0.001 | 2 | 2 | 2 | 2 | 2356-123 |
42H-1 | Nut | 0.060 | 1 | 1 | 1 | 1 | 2313-027 |
Parts for mounting pressure control | |||||||
44A-1 | Bracket for pressure controls | 1 | 1 | 1 | 1 | 2213-409 | |
44B-1 | Counter sunk screw M6 x 12 | 0.020 | 2 | 2 | 2 | 2 | 1413-090 |
44C-1 | Bracket for KP77 or KP1 | 1 | 1 | 1 | 1 | 2213-411 | |
44D-1 | Bracket for KP98 | 1 | 1 | 1 | 1 | 2213-410 | |
44E-1 | Socket cap screw M6 x 12 | 0.004 | 4 | 4 | 4 | 4 | 1413-339 |
44F-1 | Spring washer | 0.006 | 4 | 4 | 4 | 4 | 1437-022 |
44G-1 | Cylinder head screw M4 x 6 | 0.002 | 8 | 8 | 8 | 8 | 1412-200 |
44M-1 | Spring washer dia. 7,1/4 x 1 | 0.002 | 8 | 8 | 8 | 8 | 1437-020 |
Pressure controls for HFC/HCFC | |||||||
45A-1 | Pressure control KP15 A | 0.533 | 1 | 1 | 1 | 1 | 1373-135 |
45B-1 | Differential pressure control MP55 | 0.864 | 1 | 1 | 1 | 1 | 1373-159 |
forR717 | |||||||
45A-2 | Pressure control KP15 A | 0.754 | 1 | 1 | 1 | 1 | 1373-142 |
45B-2 | DFfferentiai pressure controF MP55 A | 0.978 | 1 | 1 | 1 | 1 | 1373-162 |
Temperature controls | |||||||
46A-1 | Temperature control KP77 | 0.466 | 1 | 1 | 1 | 1 | 1373-044 |
46B-1 | Temperature control KP98 | 0.674 | 1 | 1 | 1 | 1 | 1373-043 |
46C-1 | Phil pocket for temperature control | 0.162 | 3 | 3 | 3 | 3 | 1377-171 |
46D | Gasket for phil pocket dia. 27/21x1,5 | 0.008 | 3 | 3 | 3 | 3 | 2356-133 |
Coupling | |||||||
48A-1 | Disc pack | 0.282 | 2 | 2 | 2 | 2 | 1524-155 |
48B-1 | Bolt | 0.054 | 16 | 16 | 16 | 16 | 1524-163 |
48C-1 | Level washer | 0.004 | 16 | 16 | 16 | 16 | 1524-179 |
48D-1 | Lock nut | 0.005 | 16 | 16 | 16 | 16 | 1524-171 |
Crankcase healer | |||||||
57A-4 | Crankcase heater 270W.115V.G1 1/4 | 1 | 1 | 1 | 1 | 3181-034-01 | |
57A-5 | Crankcase heater 270W, 230V, G 1 1/4 | 1 | 1 | 1 | 1 | 3181-035-01 | |
57A-6 | Crankcase healer 270W, 250V, G 1 1/4 | 1 | 1 | 1 | 1 | 3181-036-01 | |
57B-2 | Seating ring dia. 42/49 x 6,5 | 0.022 | 1 | 1 | 1 | 1 | 1349-213 |
Bracket for oil filter | |||||||
59A-1 | Bracket for oil filter | 1 | 1 | 1 | 1 | 3421-081 | |
59B-1 | Socket screw M8 x 35 | 0.018 | 2 | 2 | 2 | 2 | 1413-359 |
59C-1 | Gasket for bracket | 1 | 1 | 1 | 1 | 2353-171 | |
59D-1 | Plug | 1 | 1 | 1 | 1 | 1413-265 | |
Oil filter | |||||||
60A | Filter element | 1 | 1 | 1 | 1 | 1517-124 | |
60B | Gasket tor filter | 1 | 1 | 1 | 1 | 1334-025 | |
60H | Washer dia. 19/8.2x6 | 1 | 1 | 1 | 1 | 2114-036 | |
60J | Iron ring | 3 | 3 | 3 | 3 | 2114-038 | |
60K | Magnets | 3 | 3 | 3 | 3 | 1517-022 | |
60L | Rod for magnets | 1 | 1 | 1 | 1 | 2112-156 | |
60M | Rubber ring | 1 | 1 | 1 | 1 | 1334-012 | |
60N | Washer | 1 | 1 | 1 | 1 | 1436-034 | |
60P | Locking nut | 2 | 2 | 2 | 2 | 1433-073 | |
Oil pipes for unloading mechanism | |||||||
CMO-24 | |||||||
62A-1 | Pipe set | 0.200 | 1 | 3143-292 | |||
CMO 26 | |||||||
62A-2 | Pipe set | 0.114 | 1 | 3143-291 | |||
CMO 28 | |||||||
62A-3 | Pipe set | 0.108 | 1 | 3143-290 | |||
TCMO 28 | |||||||
62A-4 | Pipe set | 0.108 | 1 | 3143-293 | |||
Joint for oil pipes | |||||||
62F | Spirolox-ring RS 50 | 0.002 | 4 | 4 | 4 | 4 | 1437-275 |
62G | O-ring dia. 9,25 x 1,78 | 0.001 | 4 | 4 | 4 | 4 | 1331-010 |
62 H | O-ring 7,65 x 1,78 | 0.001 | 4 | 6 | 8 | 4 | 1331-009 |
Oil separator CMO 2 - HFC/HCFC | |||||||
65-1 | Oil separator - complete | 1 | 1 | 1 | 4241-208 | ||
65A-1 | Housing | 1 | 1 | 1 | 4241-207 | ||
65B-1 | Demister | 1 | 1 | 1 | 1375-288 | ||
65C-1 | End cover | 1 | 1 | 1 | 3422-114 | ||
65D-1 | O-ring for 65C | 1 | 1 | 1 | 1331-089 | ||
65E-1 | Hexagon head screw M16 x 45 | 4 | 4 | 4 | 1424-102 | ||
65F-1 | Spring washer | 4 | 4 | 4 | 1437-057 | ||
65G-1 | Gasket against compr. dia. 100/62x1,5 | 1 | 1 | 1 | 2353-212 | ||
65H-1 | Hexagon head screw M12 x 40 | 4 | 4 | 4 | 1424-217 | ||
65J-1 | Stop valve complete | 1 | 1 | 1 | 2414-066 | ||
65K-1 | Gasket tor stop valve dia. 100/62x1,5 | 1 | 1 | 1 | 2356-212 | ||
65L-1 | Hexagon head screw M12 x 120 | 4 | 4 | 4 | 1424-069 | ||
Oil separator CMO 2 - R717 | |||||||
65-2 | Oil separator - complete | 1 | 1 | 1 | 4241-230 | ||
65G-2 | Gasket against compr. dia. 100/62x1,5 | 1 | 1 | 1 | 2356-212 | ||
65H-2 | Hexagon head screw M12 x 40 | 4 | 4 | 4 | 1424-217 | ||
65J-2 | Stop valve SCV 400 111 | 1 | 1 | 1 | 2411-840 | ||
Oil separator TCMO 2 - R717- HFC/HCFC | |||||||
65-3 | Oil separator - complete | 1 | 4241-233 | ||||
65A-3 | Housing | 1 | 4241-232 | ||||
65 B-3 | Demister | 1 | 1375-295 | ||||
65C-3 | End cover | 1 | 3254-315 | ||||
65D-3 | O-ring dia. 91,97x3,5 | 0.004 | 1 | 1331-080 | |||
65E-3 | Hexagon head screw M12 x 35 | 0.042 | 4 | 1424-216 | |||
65F-3 | Spring washer | 0.004 | 4 | 1437-081 | |||
65G-3 | Gasket against compr. dia. 100/62x1,5 | 1 | 2356-212 | ||||
65H-3 | Hexagon head screw.M12 x 40 | 0.046 | 1 | 1424-217 | |||
65J-3 | Slop valve complete | 1 | 2414-066 | ||||
65K-3 | Gasket for stop valve dia. 100/62x1,5 | 0.014 | 1 | 2356-212 | |||
65L-3 | Hexagon head screw M12 x 120 | 0.116 | 1 | 1424-069 | |||
Extra suction filter - only delivered on demand | |||||||
66-1 | Extra suction filter complete | 1 | 1 | 1 | 1 | 4521-030 | |
66A-1 | Filter housing | 1 | 1 | 1 | 1 | 3421-053 | |
66B-1 | End cover | 2.310 | 1 | 1 | 1 | 1 | 3422-103 |
66C-1 | O-ring dia.91.67x3.53 | 0.004 | 1 | 1 | 1 | 1 | 1331-080 |
66D-1 | Hexagon head screw M 12 x 40 | 0.046 | 4 | 4 | 4 | 4 | 1424-217 |
66E-1 | Spring washer dia. 20,2/12,2 x 2.5 | 0.004 | 4 | 4 | 4 | 4 | 1437-081 |
66F-1 | Strainer tilter | 0.374 | 1 | 1 | 1 | 1 | 3425-082 |
66G-1 | Filter bag | 0.028 | 1 | 1 | 1 | 1 | 3425-083 |
66H-1 | Insert tor tilter bag | 0.032 | 1 | 1 | 1 | 1 | 3424-058 |
66J-1 | O-ring dia. 75.56 x 5,33 | 0.004 | 1 | 1 | 1 | 1 | 1331-042 |
66K-1 | Hexagon head screw M 14 x 45 | 0.070 | 4 | 4 | 4 | 1 | 1424-242 |
66L-1 | Gasket against compr. dia. 112/70x1,5 | 0.018 | 1 | 1 | 1 | 1 | 2356-213 |
Oil cooler R717 | |||||||
76A-1 | Angla swivel screw-joint dia. 3/8"/12 | 0.180 | 1 | 1 | 1 | 1 | 1349-325 |
76B-1 | Bushing G 3/4" x G 3/8" | 2 | 2 | 2 | 2 | 2312-022 | |
76C-1 | Gasket dia. 32/27x1,5 | 0.008 | 2 | 2 | 2 | 2 | 2356-139 |
76D-1 | Straight swivel-in joint | 0.070 | 2 | 2 | 2 | 2 | 1349-053 |
76E-1 | Angle swivel screw-in joint | 0.170 | 1 | 1 | 1 | 1 | 1349-325 |
76F-1 | Straight screw-in joint | 0.058 | 1 | 1 | 1 | 1 | 1349-054 |
Oil cooler HFC/HCFC | |||||||
76A-2 | Angle swivel screw-joint dia. 3/8"/10 | 0.178 | 1 | 1 | 1 | 1 | 1349-324 |
76B-2 | Bushing 03/4" x G 3/8" | 2 | 2 | 2 | 2 | 2312-022 | |
76C-2 | Gasket dia. 32/27 x 1,5 | 0.008 | 2 | 2 | 2 | 2 | 2356-139 |
76D-2 | Straight screw-in joint | 0.070 | 2 | 2 | 2 | 2 | 1349-053 |
76 E-2 | Angle swivel screw-in joint | 0.170 | 1 | 1 | 1 | 1 | 1349-325 |
76F-2 | Angle swivel screw-in joint | 0.170 | 1 | 1 | 1 | 1 | 1349-325 |
80 | Solenoide valve blok, complete with 0,6 mm orifice for oil return, coil | 2.040 | 1 | 1 | 1 | 1 or 2 | 1372-179 |
Strainer kit consist of: | 1 | 1 | 1 | 1or2 | 1372-089 | ||
80E | Strainer | ||||||
80G | Al-gasket | ||||||
Service hit consist of: | 1 | 1 | 1 | 1 or 2 | 1372-086 | ||
80P | Armature tube | ||||||
80H | Armature | ||||||
80K | O-ring | ||||||
80M | O-ring | ||||||
80L | Al-gasket | ||||||
80N | Snap fastener | ||||||
Seal kit consist of: | 1 | 1 | 1 | 1 or 2 | 1372-091 | ||
80G | Al-gasket | ||||||
80K | 0-RING | ||||||
80M | 0-RING | ||||||
80L | Al-gasket | ||||||
80Q | Al-gasket | ||||||
Orifice kit 0,6 mm consist of: | 1 | 1 | 1 | 1 or 2 | 1371-034 | ||
80L | Al-gasket | ||||||
80Q | Al-gasket | ||||||
80I | Orifice 6 mm | ||||||
Orifice kit 0,8 mm consist of: | 1 | 1 | 1 | 1 or 2 | 1371-035 | ||
80L | Al-gasket | ||||||
80Q | Al-gasket | ||||||
80I | Orifice 8 mm | ||||||
Orifice kit 1,0 mm consist of: | 1 | 1 | 1 | 1 or2 | 1371-036 | ||
80L | Al-gasket | ||||||
80Q | Al-gasket | ||||||
80I | Orifice 1,0 mm | ||||||
Orifice kit 3,3 mm (tor thermopump only) consist of: | 1 | 1 | 1 | 1 or 2 | 1371-037 | ||
80L | Al-gasket | ||||||
80Q | Al-gasket | ||||||
80I | Orifice 3,3 mm | ||||||
80J-1 | Goil 220/230V 50/60 Hz, 10W | 0.285 | 1372-537 | ||||
80J-2 | Coil 110V, 50/60 Hz, 10W | 0.285 | 1372-538 | ||||
80J-3 | Coil 240V, 50 Hz,10W | 0.285 | 1372-539 | ||||
80J-4 | Cofl24V, 50 Hz, 10 W | 0.285 | 1372-541 | ||||
Injection system for TCMO | |||||||
Only for TCMO with int. IP system | |||||||
83A-1 | Guard | 0.968 | 1 | 3116-048 | |||
83B-1 | Nipple | 0.156 | 1 | 3116-041 | |||
83C-1 | O-ring dia. 25 x 3,5 tor 83B | 0.012 | 1 | 1331-022 | |||
83D-1 | O-ring dia. 20,2 x 3,5 for 83B | 0.009 | 1 | 1331-019 | |||
83E-1 | Socket cap screw M6 x 16 | 0.006 | 2 | 1413-340 | |||
83F-1 | Spring washer 11,1/6,1 x 1,6 | 0.004 | 2 | 1437-022 | |||
83G-1 | Stop valve DN 20 witn oval flange | 1.800 | 1 | 2412-016 | |||
83H-1 | Gasket tor stop valve dia. 44/33 x 1.5 | 0.002 | 1 | 2356-039 | |||
83J-1 | Hexagon head screw M12 x 40 | 0.045 | 2 | 1424-217 | |||
83K-1 | Stop valve SG 6 | 0.540 | 1 | 2413-123 | |||
83L-1 | Gasket for valve dJa. 18/10 x 1,5 | 0.006 | 2 | 2356-123 | |||
83M-1 | Filter complete | 1 | 4522-007 | ||||
83M-2 | Insert for tiller | 1 | 3425-097 | ||||
83N-1 | Solenoid valve without coil | 0.688 | 1 | 1372-423 | |||
83S-1 | Coil 220/230V, 50/60Hz, 10W | 0.260 | 1372-537 | ||||
83S-2 | Coil 110V, 50/60Hz. 10W | 0.260 | 1372-538 | ||||
83S-3 | Coil 240V,50Hz, 10W | 0.260 | 1372-539 | ||||
83P-1 | Injection valve TEAT 20-5 - R22 | 2.460 | 1 | 1371-242 | |||
83P-2 | Injection valve TEAT 20-5 - R717 | 2.460 | 1 | 1371-240 | |||
Spec. spring for 83P-2 | 0.018 | 1 | 1523-070 | ||||
83Q-1 | Soienoid vatve for by-pass, without coil | 0.822 | 1 | 1372-423 | |||
83T-1 | Coil 220/230V, 50/60Hz, 10W | 0.260 | 1372-537 | ||||
83T-2 | Coil 11CV, 50/60Hz, 10W | 0.260 | 1372-538 | ||||
83T-3 | Coil 240V, MHz, 10W | 0.260 | 1372-539 | ||||
83R-1 | Non-return valve for discharge pipe | 2.958 | 1 | 1372-249 | |||
Side cover with solenoid valves for capacity control | |||||||
86A-1 | Side cover with oil level glass | 10.760 | 1 | 1 | 1 | 1 | 3113-134 |
86B-1 | Gasket for side cover | 0.014 | 1 | 1 | 1 | 1 | 2353-102 |
86C-1 | Hexagon head screw M12 x 65 | 0.070 | 10 | 10 | 10 | 10 | 1424-059 |
86D-1 | Hexagon head screw M12 x 75 | 0.078 | 2 | 2 | 2 | 2 | 1424-061 |
86E-1 | Oil level gfass | 0.230 | 1 | 1 | 1 | 1 | 1226-015 |
86F-1 | O-ring for oil level glass, dia.52,07 x 2,62 | 0.002 | 1 | 1 | 1 | 1 | 1331-140 |
86G-1 | Hexagon head screw M6 x 18 | 0.006 | 4 | 4 | 4 | 4 | 1424-148 |
86H-1 | Valve body with 3 solenoid valves,without coils | 3.690 | 1 | 1 | 1 | 1 | 3143-413 |
86X-1 | Coil 220/230V, 50/60Hz, 10W | 0.260 | 1373-537 | ||||
86X-2 | Coil 110v,50/QOHz, 1CW | 0.260 | 1372-538 | ||||
86X-3 | Coil 240V. 50Hz, 10W | 0.260 | 1372-539 | ||||
86Y | Solenoid valve- Service lot for one solenoid valve | 3.690 | 1372-424 | ||||
86J-1 | Gasket tor valve body | 0.010 | 1 | 1 | 1 | 1 | 2353-150 |
86J-2 | Gasket for valve body for ex-exeiution | 0.010 | 1 | 1 | 1 | 1 | 2353-188 |
86K-1 | Hexagon head screw M8 x 70 | 0.030 | 4 | 4 | 4 | 4 | 1424-042 |
86N-1 | Washer dia. 24/13x2,5 | 0.006 | 12 | 13 | 12 | 12 | 1436-036 |
86P-1 | Plug connector for coils | 3 | 3 | 3 | 3 | 1372-545 | |
86Q-1 | Valve for prelubrication | 1 | 1 | 1 | 1 | 2412-585 | |
86R-1 | Nut | 1 | 1 | 1 | 1 | 2313-045 | |
86S-1 | Special joint | 1 | 1 | 1 | 1 | 2334-027 | |
86T-1 | Cap | 1 | 1 | 1 | 1 | 2313-027 | |
86U-1 | Joint 3/8" | 1 | 1 | 1 | 1 | 1349-053 | |
86V-1 | Alu-gasket | 1 | 1 | 1 | 1 | 2355-123 | |
Side cover for unloading start | |||||||
87A-1 | Side cover with oil level glas | 10.760 | 1 | 1 | 1 | 1 | 3113-134 |
87B-1 | Gasket for side cover | 0.014 | 1 | 1 | 1 | 1 | 2353-102 |
87C-1 | Hexagon head screw M12 x 6 | 0.070 | 10 | 10 | 10 | 10 | 1424-059 |
87D-1 | Hexagon head screw M12 x 75 | 0.078 | 2 | 2 | 2 | 2 | 1424-061 |
87E-1 | Oil level glas | 0.230 | 1 | 1 | 1 | 1 | 1226-015 |
87F-1 | O-ring dia. 52,07x2,52 | 0.002 | 1 | 1 | 1 | 1 | 1331-140 |
87G-1 | Hexagon head screw M6 x 18 | 0.006 | 4 | 4 | 4 | 4 | 1424-149 |
87K-1 | Cover for unloading start | 0.805 | 1 | 1 | 1 | 1 | 3143-187 |
87L-1 | Gasket for cover | 0.008 | 1 | 1 | 1 | 1 | 2353-149 |
87M-1 | Hexagon head screw M8 x 35 | 0.016 | 4 | 4 | 4 | 4 | 1424-170 |
87N-1 | Washer dia. 24/13x2,5 | 0.006 | 12 | 12 | 12 | 12 | 1436-036 |
87Q-1 | Valve for preilubrication | 1 | 1 | 1 | t | 2412-585 | |
87R-1 | Nut | 1 | 1 | 1 | 1 | 2313-045 | |
87S-1 | Special joint | 1 | 1 | 1 | 1 | 2334-027 | |
87T-1 | Cap | 1 | 1 | 1 | 1 | 2313-027 | |
87U-1 | Joint 3/8" | 1 | 1 | 1 | 1 | 1349-053 | |
87V-1 | Alu-gasket | 1 | 1 | 1 | 1 | 2356-123 | |
Intermediate pressure connection | |||||||
Only for TCMO with ex. system | |||||||
90A-1 | IP champer R22 | 1 | 3114-100 | ||||
90A-2 | IP champer R717 | 1 | 3114-101 | ||||
90B-1 | IP pipe | 1 | 3114-102 | ||||
90C-1 | Filter strainer | 1 | 2464-232 | ||||
90D-1 | O-ring | 2 | 1331-019 | ||||
90E-1 | Flange for cover | 1 | |||||
90F-1 | Insert for cover | 1 | |||||
90H-1 | O-ring | 1 | 1331-024 | ||||
90H-1 | Screw | 4 | 1424-191 | ||||
90J-1 | Gasket | 1 | 2353-180 | ||||
90K-1 | Screw | 4 | 1424-194 | ||||
90L-1 | Nut | 4 | 1432-064 | ||||
90M-1 | Washer | 8 | 1436-035 | ||||
Oil return with solenoid valve | |||||||
Only for CMO with HFC/HCFC | |||||||
94A-1 | Cover against oil separator | 1 | 1 | 1 | 4241-229 | ||
94B-1 | O-ring dia. B2,15x 3,5 | 0.004 | 1 | 1 | 1 | 1331-077 | |
94C-1 | Hexagon head screw M8 x 18 | 0.012 | 8 | 8 | 8 | 1424-164 | |
94D-1 | Spring washer | 0.006 | 8 | 8 | 8 | 1437-054 | |
94E-1 | Straight screw-in joint GE 6-SR 1/4" | 0.054 | 1 | 1 | 1 | 1349-124 | |
94F-1 | Stop valve BML 6 | 0.280 | 1 | 1 | 1 | 1374-050 | |
94G-1 | Straight screw-in joint GE 10-LR1/4" | 0.048 | 1 | 1 | 1 | 1349-051 | |
94H-1 | Filter | 0.054 | 1 | 1 | 1 | 4522-007 | |
94J-1 | Straight screw-in joint GE 8-LR 1/4°' | 0.044 | 1 | 1 | 1 | 1349-050 | |
94K-1 | Weiding nipple | 0.01 B | 1 | 1 | 1 | 2322-032 | |
94L-1 | Gasket | 0.006 | 2 | 2 | 2 | 2356-123 | |
94M-1 | Nozzle 0,6 mm | 0.002 | 1 | 1 | 1 | 3142-035 | |
94N-1 | Union nut | 0.080 | 1 | 1 | 1 | 2313-006 | |
94P-1 | Bushing G1/4"x G 1/2" | 0.072 | 1 | 1 | 1 | 2312-013 | |
94Q-1 | Angle swivel screw-in joint 1/4" NPT | 0.120 | 2 | 2 | 2 | 1349-089 | |
94R-1 | Straight screw-in joint GE 8-LR 1/4" | 0.020 | 1 | 1 | 1 | 1349-106 | |
94S-1 | Solenoid valve without coil | 0.624 | 1 | 1 | 1 | 1372-426 | |
94U-1 | Coil 220/230V, 50/60HZ, 10W | 0.260 | 1372-537 | ||||
94U-2 | Coil 110V, 50/60HZ, 10W | 0.260 | 1372-538 | ||||
94U-3 | Coil 240V, 50Hz, 10W | 0.260 | 1372-539 | ||||
94T-1 | Screw-in joint 1/4" NPT tor dia. 10 | 0.046 | 1 | 1 | 1 | 1349-060 | |
Oil return with solenoid valve | |||||||
Only tor CMO wilh R717 | |||||||
94A-2 | Cover against oil separator | 1 | 1 | 1 | 3254-066 | ||
94B-2 | Gasket for cover | 0.020 | 1 | 1 | 1 | 2355-105 | |
94G-2 | Hexagon head screw M12 x 30 | 0.042 | 6 | 6 | 6 | 1424-215 | |
94D-2 | Straight screw-in joint | 0.102 | 1 | 1 | 1 | 1349-089 | |
94E-1 | Nipple | 0.044 | 1 | 1 | 1 | 2334-024 | |
94F-2 | Union nut | 0.080 | 2 | 2 | 2 | 2313-006 | |
94G-2 | Gasket for nipple/valve | 0.006 | 4 | 4 | 4 | 2356-123 | |
94H-2 | Stop valve | 1 | 1 | 1 | 2413-010 | ||
94J-2 | Welding nipple | 0.018 | 1 | 1 | 1 | 2322-032 | |
94K-2 | Angle swivel screw-in joint G 1/4" | 0.098 | 2 | 2 | 2 | 1349-087 | |
94L-2 | Filter complete | 1 | 1 | 1 | 4522-002 | ||
94M-2 | Nozzle 0,5 mm | 0.002 | 1 | 1 | 1 | 3142-034 | |
94P-2 | Nipple G1/4"xG1/2° | 0.082 | 1 | 1 | 1 | 2311-040 | |
94Q-2 | Straight screw-in joint 1/4" NPT | 0.042 | 1 | 1 | 1 | 1349-056 | |
94S-2 | Solenoid valve without coil | 0.624 | 1 | 1 | 1 | 1372-422 | |
94U-1 | Coil 220/230V, 50/50H2, 10W | 0.260 | 1372-537 | ||||
94U-2 | Coil 110V,50/60Hz, 10W | 0.260 | 1372-538 | ||||
94U-3 | Coil 240V, MHz, 10W | 0.260 | 1372-539 | ||||
Oil return wilh solenoid valve | |||||||
Only for TCMO with R717 and HFC/HCFC | |||||||
94A-3 | Cover against oil separator | 1 | |||||
94B-3 | O-ring dia. 91,67x 3,53 | 0.004 | 1 | 1331-080 | |||
94C-3 | Hexagon head screw M12 x 40 | 0.046 | 4 | 1424-217 | |||
94D-3 | Spring washer 20,2/12,2 x 2,5 | 0.004 | 4 | 1437-081 | |||
94E-3 | Angle swivel screw-joint | 0.102 | 1 | 1349-087 | |||
94F-3 | Nipple | 0.044 | 1 | 2334-024 | |||
94G-3 | Union | 0.080 | 3 | 2313-006 | |||
94H-3 | Gasket for nipple/valve | 0.006 | 4 | 2356-123 | |||
94J-3 | Welding nipple | 0.018 | 2 | 2322-032 | |||
94K-3 | Angle swivel screw-in joint G 1/4" | 0.098 | 2 | 1349-087 | |||
94L-3 | Filter complete | 1 | 4522-002 | ||||
94M-3 | Nipple G 1/4" xG 1/2" | 0.082 | 1 | 2311-040 | |||
94N-3 | Gasket dia. 19/14x1,5 | 0.004 | 2 | 2356-124 | |||
94P-3 | Nozzie 0,4 mm - only for R717 | 0.002 | 1 | 3142-033 | |||
94P-3 | Nozzle 0.5 mm - only for HFC/HCFC | 0.002 | 1 | 1342-034 | |||
940-3 | Straight screw-in joint 1/4" NPT | 0.042 | 2 | 1349-056 | |||
94S-3 | Solenoid valve without coil | 0.624 | 1 | 1372-422 | |||
94U-1 | Coil 220/230V, 50/60Hz, 10W | 0.260 | 1372-537 | ||||
94U-2 | Coil 10V, 50/60Hz. 10W | 0.260 | 1372-538 | ||||
94U-3 | Coil 240V, 50Hz, 10W | 0.260 | 1372-539 | ||||
94 | Stop valve | 1 | 2413-010 | ||||
Oil return with float valve | |||||||
Only tor CMO with HFC/HCFC | |||||||
95A-1 | Cover against oil separator | 0.626 | 1 | 1 | 1 | 3411-007 | |
95B-1 | O-ring dia.82,15 x 3,5 for 95A | 0.004 | 1 | 1 | 1 | 1331-077 | |
95C-1 | Hexagon head screw M8 x 18 | 0.012 | 8 | 8 | 8 | 1424-164 | |
95D-1 | Sprig washer | 0.006 | 8 | 8 | 8 | 1437-054 | |
95E-1 | Float valve complete | 0.200 | 1 | 1 | 1 | 1374-505 | |
95F-1 | Distance ring dia. 10/8 x 8 | 0.002 | 1 | 1 | 1 | 2212-036 | |
95G-1 | Hexagon head screw M5 x 35 | 0.006 | 2 | 2 | 2 | 1413-334 | |
95H-1 | Angle swivel G 1/4" for dia. 6 | 1 | 1 | 1 | 1349-092 | ||
OiE return with float valve | |||||||
Only for CMO with P717 | |||||||
95A-2 | Cover against oil separator | 1 | 1 | 1 | 4512-003 | ||
95B-2 | Gasket tor cover | 1 | 1 | 1 | 2355-108 | ||
95C-2 | Filter | 1 | 1 | 1 | 3425-077 | ||
95D-2 | Hexagon head screw M12 x 30 | 6 | 6 | 6 | 1424-215 | ||
95E-2 | Angle swivel screw-in joint | 2 | 2 | 2 | 1349-092 | ||
Oil return with float valve | |||||||
Only for TCMO with R717 and HFC/HCFC | |||||||
95A-3 | Cover with float valve | 1 | 4512-004 | ||||
95B-3 | O-ring dia. 91,67x 3,53 | 0.004 | 1 | 1331-080 | |||
95C-3 | Hexagon head screw M12 x 40 | 0.046 | 4 | 1424-217 | |||
95D-3 | Spring washer dia. 20,2/12,2 x 2,5 | 0.004 | 4 | 1437-081 | |||
95E-3 | Angle swivel screw-in joint | 2 | 1349-092 | ||||
Thermopump | |||||||
98A-1 | Side cover for thermopump | 1 | 1 | 1 | 1 | 3113-133 | |
98B-1 | Monitor box | 1 | 1 | 1 | 1 | 1553-215 | |
Allen screw | 2 | 2 | 2 | 2 | 1412-204 | ||
Spring washar | 4 | 4 | 4 | 4 | 1437-020 | ||
98C-1 | Level indicator | 2 | 2 | 2 | 2 | 3185-038 | |
98D-1 | Outer part for level indicator | 2 | 2 | 2 | 2 | 3185-034 | |
98E-1 | Washer dia. 20/13x1,5 Al | 3 | 3 | 3 | 3 | 2356-125 | |
98F-1 | Rubber cap | 2 | 2 | 2 | 2 | 1554-194 | |
98G-1 | Solenoid valve without coil | 1 | 1 | 1 | 1 | 1372-422 | |
98H-T | Solenoid valve without coil | 1 | 1 | 1 | 1 | 1372-423 | |
98AB-1 | Coil 220/230V. 50/60Hz. 10W | 0.260 | 1372-537 | ||||
9BAB-2 | Coil 110V, 50/60HZ, 10W | 0.260 | 1372-538 | ||||
98AB-3 | Coil 240V, 50Hz, 10W | 0.260 | 1372-539 | ||||
98K-1 | Check valve | 2 | 2 | 2 | 2 | 1364-008 | |
98M-1 | VA-joint with nozzle 0,6 mm | 1 | 2314-100 | ||||
Plug connector for corils | 1 | 1 | 1 | 1 | 1372-490 | ||
98M-2 | VA-joint with nozzle 1,2 mm | 2 | 3 | 4 | 2314-097 | ||
Bracket for stop valve | 1 | 1 | 1 | 1 | 2213-085 | ||
Allen screw M4x 12 | 2 | 2 | 2 | 2 | 1412-203 | ||
Cable binder | 1 | 1 | 1 | 1 | 1554-053 | ||
Straight joint 10 mm | 1 | 1 | 1 | 1 | 1349-051 | ||
T-joint 10 mm | 2 | 3 | 4 | 1 | 1349-041 | ||
Straight joint 6 mm | 3 | 3 | 3 | 3 | 1349-006 | ||
Socket 10 mm NPT | 1 | 1 | 1 | 1 | 1349-101 | ||
Angis swivel joint 10 mm BSP | 1 | 1 | 2 | 1 | 1349-177 | ||
Angle joint 10 mm | 2 | 2 | 2 | 2 | 1349-089 | ||
Angle swivel joint 6 mm | 1 | 1349-092 | |||||
Angle joint 10 mm | 1 | 1 | 2 | 1 | 1349-033 | ||
Reducing socket 3/8" -1/4" | 1 | 1 | 1 | 1349-076 | |||
Straight joint 10 mm NPT | 2 | 2 | 1349-060 | ||||
Arigle socket 10 mm | 1 | 1349-112 | |||||
Washer 13/10 x 1,5 Al | 2 | 2 | 2 | 2356-123 | |||
Washer 25/17 x 1,5 Al | 1 | 1 | 1 | 2356-130 | |||
Washer 19/14 x 1,5 AI | 2 | 2 | 2 | 2 | 2356-124 | ||
Spring washer tor M12 | 1 | 1 | 1 | 1437-026 | |||
Plug | 1 | 1 | 2314-048 | ||||
Pipe for pressure equalizing | 1 | 1 | 1 | 3185-033 | |||
98N-1 | Filter | 1 | 1 | 1 | 1 | 4522-007 | |
98P-1 | Stop valve | 1 | 1 | 1 | 1 | 2412-277 | |
98Q-1 | Cooling cover | 1 | 1 | 1 | 1 | 3113-171 | |
98R-1 | Washer dia. 29/21 x1,5 AI | 2 | 2 | 2 | 2 | 2356-136 | |
8BS-1 | Gasket for side cover | 1 | 1 | 1 | 1 | 2353-101 | |
98T-1 | Hexagon head screw M12 x 75 | 14 | 14 | 14 | 14 | 1424-061 | |
Socket 1 /4" | 1 | 1 | 1 | 1 | 1349-101 | ||
98U | Solenoid valve without coil | 1372-423 | |||||
93V | Solenoid valve without coil | 1 | 1 | 1 | 1372-423 | ||
98AB-1 | Coil 220/230V, 50/60Hz, 10W | 0.260 | 1 | 1 | 1 | 1 | 1372-537 |
99A8-2 | Coil 110V,50/60Hz,10W | 0.260 | 1372-538 | ||||
98AB-3 | Coil 240V, 50Hz,10W | 0.260 | 1372-539 | ||||
98X | PT100 sensor | 1 | 1 | 1 | 1 | 1373-253 | |
98Y | Stop valve | 1 | 1 | 1 | 1 | 2412-277 | |
98Z | Non-return valve | 1 | 1 | 1 | 1 | 1364-022 | |
98AA | Screw joint | 1 | 1 | 1 | 1 | 2314-105 | |
UNISAB | |||||||
99A-1 | Support for UNISAB | 1 | 1 | 1 | 1 | 2213-500 | |
99B-1 | Distance washers | 4 | 4 | 4 | 4 | 2212-130 | |
99C-1 | Scraw for support M10 x 20 | 2 | 2 | 2 | 2 | 1424-190 | |
99D-1 | Screw tor UNISAB M6 x 20 | 4 | 4 | 4 | 4 | 1424-152 | |
99E-1 | Washers dia. 22/7 | 4 | 4 | 4 | 4 | 1436-025 | |
Tools for compressor CMO and TCMO | |||||||
Line no. A600 = Norma set | |||||||
Lire no. A601 = Extended set | |||||||
Line no. A6C2 =Tools for coupling AMR | |||||||
Line no. A603 =Tools for alignment of flexible coupling |
Pos no | Designation | Dim | Part no | Line no A600 | Line no A601 | Line no A601 | Line no A601 | |
1 | Clamp with screw | 3183-141 | 4 | 4 | ||||
2 | Toois for shaft seal | 3183-139 | 1 | 1 | ||||
3 | Tommy screws tor cyl. liners | 3183-041 | 2 | 2 | ||||
5 | Supporting plate for pistons | 3181-114 | 8 | 8 | ||||
6 | Spanner for healing cartridge | JV55 | 3183-060 | 1 | 1 | |||
7 | Puller for coupling or belt pulley | 3183-058 | 1 | 1 | ||||
8 | Adjustment jig for couping | 3183-104 | 1 | |||||
9-1 | Wrench for socket cap screw | JV2 | 1 | |||||
9-2 | Wrench for socket cap screw | JV3 | 1 | |||||
9-3 | Wrench for socket cap screw | JV4 | 1 | |||||
9-4 | Wrench for socket cap screw | JV5 | 1 | |||||
9-5 | Special wrench for shaft seal | 1612-392 | 1 | |||||
10 | Retaining ring pliers | J21 | 1 | |||||
11-1 | Ring and open spanner | JV10 | 1612-392 | 1 | ||||
11-2 | Ring and open spanner | JV13 | 1 | |||||
11-3 | Ring and open spanner | JV17 | 1 | |||||
11-4 | Ring and open spanner | JV27 | 1 | |||||
12-1 | Ring spanner | JV6X7 | 1 | |||||
12-2 | Ring spanner | JV8X9 | 1 | |||||
13-1 | Socket wrench | JV10 | 1 | |||||
13-2 | Socket wrench | JV13 | 1 | |||||
13-3 | Socket wrench | JV17 | 1 | |||||
13-4 | Socket wrench | JV19 | 1 | |||||
13-5 | Sockte wrench | JV22 | 1 | |||||
13-6 | Socket wrench | JV24 | 1 | |||||
13-7 | Socket wrench | JV1/2 | 1 | 1 | ||||
14 | Ratchet handle | 1 | ||||||
15 | Speed handle | 1 | ||||||
16 | Universal joint for socket wrench | 1 | ||||||
17-1 | Extension rod far socket wrench | 1 | ||||||
17-2 | Extension rod tor socket wrench | 1 | ||||||
18 | Screw driver socket | 1 | ||||||
19-1 | Torque wrench 15-90 Mm | 1 | 1 | |||||
19-2 | Torque wrench 40-200 Nm | 1 | ||||||
20 | Coupler for torque wrench | 1 | 1 | |||||
21 | Open spanner for torque wrench | JV1/2 | 1 | 1 | ||||
22 | Feeler gauge | 1 |
Spare parts for SMC 104-106-108 & TSMC 108 Mk3 Type S-L and E
Spare parts for SMC 104-106-108 & TSMC 108 Mk3 Type S-L and E | |||||||
Relevant drawings for compressor | SMC | TSMC | |||||
SMC 100 Mk 3, S-L-E (delivered after 89 - 10) | 0661-521 | 0661-522 | |||||
Cylinder liner ect. SMC - TSMC 104,106, 108 Mk 3 (after 89.10) | 0661-520 | ||||||
SMC 100 M k3 | 0661-755 | 0661-756 | |||||
Cylinder liner ect. SMC - TSMC 100 Mk3 | 0661-605 | ||||||
*) If the compressor runs as heat pump, this must be mentioned when ordering, to ensure a correct delivery | |||||||
Pos. | Designation | Weight each in kg | Number each compresssor | Part No | |||
SMC 104 | SMC 106 | SMC 108 | TSMC 108 | ||||
Compressor frame | |||||||
1A-1 | Frame SMC 104 | 240.000 | 1 | 3111-065 | |||
1A-2 | Frame SMC 106 | 274.000 | 1 | 3111-066 | |||
1A-3 | Frame SMC 108 | 285.000 | 1 | 3111-067 | |||
1 A-4 | Frame TSMC 108 | 290.000 | 1 | 3111-068 | |||
1B-1 | Oil levei glass dia. 80 | 0.230 | 1 | 1 | 1 | 1 | 1226-015 |
1C-1 | O-ring PRP 137 - 52,07 x 2,62 *) | 0.002 | 1 | 1 | 1 | 1 | 1331-140 |
1D-1 | Hexagon head MS x 16 | 0.010 | 4 | 4 | 4 | 4 | 1424-148 |
Top cover - air cooled | |||||||
2A-1 | Top cover S-L, | 19.000 | 1 | 2 | 3 | 2 | 3113-191 |
2A-2 | Top co^er with fiange S-L | 20.500 | 1 | 1 | 1 | 2 | 3113-192 |
2A-3 | Top cover E | 19.000 | 1 | 2 | 3 | 2 | 3113-177 |
2A-4 | Top cover with flange E | 20.500 | 1 | 1 | 1 | 2 | 3113-176 |
2C-1 | Gasket for top cover | 0.020 | 2 | 3 | 4 | 4 | 2353-151 |
2D-1 | Hexagon head M14x90 | 0.120 | 30 | 46 | 62 | 60 | 1424-083 |
2F-1 | Hexagon head M14 x 120 | 0.165 | 2 | 2 | 2 | 4 | 1424-090 |
2G-1 | Washer for M14 dia- 28/15 x 2,5 | 0.010 | 32 | 48 | 64 | 64 | 1436-037 |
Top cover-water cooled (see sketch below) | |||||||
2A-1 | Top cover S-L | 19.000 | 1 | 2 | 3 | 2 | 3113-191 |
2A-2 | Top cover with flange S-L | 20.500 | 1 | 1 | 1 | 2 | 3113-192 |
2A-3 | Top cover E | 19.000 | 1 | 2 | 3 | 2 | 3113-177 |
2A-4 | Top cover with flange E | 20.500 | 1 | 1 | 1 | 2 | 3113-176 |
2B-1 | Water cover for cover with flange | 5.800 | 1 | 1 | 1 | 2 | 3113-195 |
2B-2 | Water cover left | 5.800 | 1 | 1 | 2 | 2 | 3113-193 |
2B-3 | Water cover right | 5.800 | 1 | 1 | 3113-194 | ||
2C-1 | Gasket for top cover | 0.020 | 2 | 3 | 4 | 4 | 2353-151 |
2D-1 | Gasket for water cover pos. 2B-1 | 0.020 | 1 | 1 | 1 | 2 | 2353-176 |
2D-2 | Gasket for water cover pos, 2B-2/2B-3 | 0.020 | 1 | 2 | 3 | 2 | 2353-175 |
2E-2 | Hexagon head screw M14 x 110 | 0.150 | 30 | 46 | 62 | 60 | 1424-087 |
2F-1 | Hexagon head screw M14 x 120 | 0.165 | 2 | 2 | 2 | 4 | 1424-090 |
2G-1 | Washer for Mt4, dia, 28/15 x 2,5 | 0.010 | 32 | 48 | 64 | 64 | 1436-037 |
2H-1 | Hexagon head screw Mi 0 x 35 | 0.050 | 4 | 5 | 8 | 9 | 1424-193 |
2J-1 | Washer for M10, dia. 21/10,5 x 2 | 0.008 | 4 | 6 | 8 | 8 | 1436-035 |
Side cover o sir cooled | |||||||
3A-1 | Side cover | 10.900 | 2 | 2 | 2 | 2 | 3113-148 |
3C-1 | Gasket for side cover | 0.020 | 2 | 2 | 2 | 2 | 2353-151 |
3E-1 | Hexagon head screw M14 x 65 | 0,045 | 32 | 32 | 32 | 32 | 1424-246 |
3G-1 | Washer for M14, dia. 28/15 x 2.5 | 0.010 | 32 | 32 | 32 | 32 | 1436-037 |
Side cover - water cooled | |||||||
3A-2 | Side cover t 15,000 | 15.000 | 2 | 2 | 2 | 2 | 3113-140 |
3B-1 | Water cover | 5.800 | 2 | 2 | 2 | 2 | 3113-138 |
3C-1 | Gasket for side cover | 0.020 | 2 | 2 | 2 | 2 | 2353-151 |
3D-1 | Gasket for water cover | 0.020 | 2 | 2 | 2 | 2 | 2353-154 |
3E-2 | Hexagon head screw M14 x 55 | 0.065 | 28 | 28 | 28 | 28 | 1424-244 |
3F-1 | Hexagon head screw M14 x 35 | 0.045 | 4 | 4 | 4 | 4 | 1424-240 |
3G-1 | Washer for M14, dia. 28/15 x 2,5 | 0.010 | 32 | 32 | 32 | 32 | 1436-037 |
3H-1 | Hexagon head screw M 12 x 40 | 0.050 | 2 | 2 | 2 | 2 | 1424-217 |
3J-1 | Washer for M12. dia. 24/13 x 2,5 | 0.008 | 2 | 2 | 2 | 2 | 1436-036 |
End cover at pump end | |||||||
4A-1 | End cover | 17.950 | 1 | 1 | 1 | 1 | 3113-028 |
4B-1 | Gasket | 0.020 | 1 | 1 | 1 | 1 | 2353-011 |
4C-1 | Hexagon head screw M14 x 100 | 0.150 | 14 | 14 | 14 | 14 | 1424-085 |
40-1 | Washer for M14 dia. 28/15x2,5 | 0.010 | 14 | 14 | 14 | 14 | 1436-037 |
Bearing cover at pump end | |||||||
5A-1 | Bearing cover | 9.100 | 1 | 1 | 1 | 1 | 3113-031 |
58-1 | Hexagon head screw M14 x 35 | 0,055 | 6 | 6 | 6 | 6 | 1424-240 |
5C-1 | Bushing | 1.200 | 1 | 1 | 1 | 1 | 2132-021 |
5C-2 | Bushing for repair (0,5 mm underside) | 1.220 | 1 | 1 | 1 | 1 | 2132-022 |
5D-1 | Gascet-0,3 mm | 0,005 | 1 | 1 | 1 | 1 | 2353-013 |
5D-2 | Gascet-0,5 mm | 0,006 | 1 | 1 | 1 | 1 | 2353-100 |
5D-3 | Gasket - 0,75 mm | 0.010 | 1 | 1 | 1 | 1 | 2353-014 |
5D-4 | Gasket -1.0 mm | 0.015 | 1 | 1 | 1 | 1 | 2353-015 |
Bearing cover at shaft seal end | |||||||
6A-1 | Bearing cover | 23.000 | 1 | 1 | 1 | 1 | 3113-124 |
6B-1 | Hexagon head screw M14 x 60 | 0,085 | 14 | 14 | 14 | 14 | 1424-245 |
6C-3 | Bushing | 1.200 | 1 | 1 | 1 | 1 | 2132-021 |
6C-4 | Bushing for repair (0,5 mm undersize) | 1.200 | 1 | 1 | 1 | 1 | 2132-022 |
6D-1 | Gasket | 0.020 | 1 | 1 | 1 | 1 | 2353-011 |
6E-1 | Washer for M14, dia. 28/15 x 2,5 | 0.010 | 14 | 14 | 14 | 14 | 1436-037 |
6F | Valve for prelubrication | 1 | 1 | 1 | 1 | 2412-585 | |
6G | Nut | 1 | 1 | 1 | 1 | 2313-045 | |
6H | Speciai joint | 1 | 1 | 1 | 1 | 2334-027 | |
6J | Cap | 1 | 1 | 1 | 1 | 2313-027 | |
6K | Joint 3/8" | 1 | 1 | 1 | 1 | 1349-053 | |
6L | Alu gasket | 1 | 1 | 1 | 1 | 2356-123 | |
Shaft seal cover for type SB100 | |||||||
8A-2 | Shaft seal cover Δ | 1 | 1 | 1 | 1 | 3113-215 | |
8B-1 | Gasket for shaft seal Δ | 1 | 1 | 1 | 1 | 2353-005 | |
8C-1 | Hexagon head screw M10 x 40 Δ | 6 | 6 | 6 | 6 | 1424-194 | |
8D-1 | Hose connection G 1/4" Δ | 1 | 1 | 1 | 1 | 1345-143 | |
8E-1 | Plastic hose 3/16" x 300 Δ | 1 | 1 | 1 | 1 | 1241-190 | |
8F-1 | Splash ring Δ | 1 | 1 | 1 | 1 | 1437-295 | |
8G-1 | Locking ring dia. 111/105 x 3 | 1 | 1 | 1 | 1 | 3126-169 | |
8H-1 | Groover pin dia. 4x20 | 1 | 1 | 1 | 1 | 1446-081 | |
Shaft seat type SB 100 | |||||||
10-3 | Shaft seal complete,includes all parts | 1 | 1 | 1 | 1 | 3126-177 | |
marked Δ | |||||||
for compressor nos,after 98379 incl. | |||||||
10-4 | Shaft seal to replace incl.part nos | 1 | 1 | 1 | 1 | 3126-170 | |
10E-2, 10F-1. 10D-1, 10G-1. 10J-1, | |||||||
10L-2 | |||||||
for compressor nos.up to 98378 incl. | |||||||
10-5 | Shaft seal to replace incl.part nos | 1 | 1 | 1 | 1 | 3126-178 | |
10E-2. 10F-1, 10D-1, 10G-2, 10L-2, | |||||||
10J-1 | 1 | ||||||
for compressor nos.up to 98379 incl. | |||||||
10A-1 | Retaining flange Δ | 1 | 1 | 1 | 1 | 3126-166 | |
10B-1 | Spring Δ | 10 | 10 | 10 | 10 | 2142-058 | |
10D-1 | O-ring dia. 75,6 X 3,5 *) Δ | 1 | 1 | 1 | 1331-075 | ||
10E-2 | Slide ring(cast iron) Δ | 1 | 1 | I | 1 | 3126-175 | |
10F-1 | Slide ring (special carbon) Δ | 1 | 1 | I | 1 | 3126-168 | |
10G-1 | O-ring dia. 82.15 X 3.5 *) | 1 | 1 | 1 | 1 | 1331-077 | |
10G-2 | Seating ring Δ | 1 | 1 | 1 | 1 | 1332-124 | |
10H-1 | Locking ring Δ | 1 | 1 | 1 | 1 | 3126-153 | |
10J-1 | Socket cap screw M 5x 16 Δ | 4 | 4 | 4 | 4 | 1413-329 | |
10L-2 | Back-up ring Δ | 1 | 1 | 1 | 1 | 1332-125 | |
10M-2 | Locking ring Δ | 1 | 1 | 1 | 1 | 1437-046 | |
Oil pump | |||||||
11-1 | Oil pump | 2.400 | 1 | 1 | 1 | 1 | 3141-004 |
11A-1 | Housing | 0.800 | 1 | 1 | 1 | 1 | |
11B-1 | Cover | 0.800 | 1 | 1 | 1 | 1 | |
11E -1 | Gear wheel | 0.330 | 1 | 1 | 1 | 1 | |
11F-1 | Gear wheel | 0.400 | 1 | 1 | 1 | 1 | |
11G-1 | Gear wheli for pump pinion | 0.660 | 1 | 1 | 1 | 1 | 3141-046 |
11H-1 | Gear wheel | 0.530 | 1 | 1 | 1 | 1 | 3141-047 |
11J-1 | Lock nut M10 x 10,7 | 0.015 | 1 | 1 | 1 | 1 | 1433-080 |
11K-1 | Gasket - paper - 0.2 mm | 0.001 | 1 | 1 | 1 | 1 | 2353-021 |
11L-1 | Washer for M 10dia. 21/10,5 x 2 | 0.005 | 1 | 1 | 1 | 1 | 1436-035 |
11M-1 | Hexagon head screw M 6 x 30 | 0.010 | 4 | 4 | 4 | 4 | 1424-153 |
11N -1 | Key - 5 x 5 x 12 | 0.002 | 1 | 1 | 1 | 1 | 1526-050 |
11P-1 | Gasket dia. 32/27 x 1,5 | 0.005 | 1 | 1 | 1 | 1 | 2356-139 |
11Q-1 | Hexagon head screw M12 x 25 | 0.040 | 2 | 2 | 2 | 2 | 1424-215 |
11R-1 | Spring washer dia. 12 | 0.002 | 2 | 2 | 2 | 2 | 1437-081 |
11 S-1 | Threaded nipple - 3/4" x 7/8" BSP | 0.230 | 1 | 1 | 1 | 1 | 2311-007 |
11T-1 | Spring washer - dia- 11,1 /6.1 x 1,6 | 0.005 | 8 | 8 | 8 | 8 | 1437-022 |
11U-1 | Hexagon head screw M 6 x 35 | 0.012 | 4 | 4 | 4 | 4 | 1424-155 |
11V -1 | Guide pin | 2 | 2 | 2 | 2 | 1445-066 | |
Unloading cylinder | |||||||
12-1 | Unloading cylinder | 1,765 | 1 | 1 | 1 | 3135-149 | |
Complete L=75, S=21.5 | |||||||
12-2 | Unloading cylinder | 1.790 | 1 | 1 | 1 | 1 | 3135-150 |
Complete L=100. S=46,5 | |||||||
12-3 | Unloading cylinder | 1.815 | 1 | 1 | 1 | 3135-151 | |
Complete L=125, S=71,5 | |||||||
12-4 | Unloading cylinder | 1.840 | 1 | 1 | 3135-152 | ||
Complete L=150, S=96,5 | |||||||
12-5 | Unloading cylinder (HP) | 1,8 | 1 | 3135-161 | |||
Complete L=82, S=24,5 | |||||||
12A-1 | Unloading cylinder | 1.700 | 2 | 3 | 4 | 3 | 3135-147 |
(SMC and TSMC LP) | |||||||
12A-2 | Unloading cylinder | 1.800 | 1 | 3135-148 | |||
(TSMC HP) | |||||||
12B-1 | Piston | 0.220 | 2 | 3 | 4 | 4 | 3135-034 |
12C-1 | Piston rod 75 mm (SMC only) | 0.065 | 1 | 1 | 1 | 3135-041 | |
12C-2 | Piston rod 100 mm | 0.090 | 1 | 1 | 1 | 1 | 3135-042 |
12C-3 | Piston rod 125 mm | 0.115 | 1 | 1 | 1 | 3135-043 | |
12C-4 | Piston rod 150 mm | 0.140 | 1 | 1 | 3135-044 | ||
12C-5 | Piston rod 82 mm,grounded | 0.090 | 1 | 3135-140 | |||
(TSMC HP only) | |||||||
12D-1 | Threaded plug - 3/8" BSP | 0.065 | 2 | 3 | 4 | 4 | 2314-025 |
12E-1 | Gasket dia. 25/17 x 1,5 | 0.002 | 2 | 3 | 4 | 4 | 2356-130 |
12F-1 | Seeger ring dia. 52 (SMC and TSMC LP) | 0.008 | 2 | 3 | 4 | 3 | 1437-155 |
12G-1 | Spring guide | 0.040 | 2 | 3 | 4 | 4 | 2145-004 |
12H-1 | Spring retainer (SMC and TSMC LP) | 0.110 | 2 | 3 | 4 | 3 | 3135-057 |
12J-1 | Spring (outer) | 0.065 | 2 | 2 | 4 | 4 | 2142-056 |
12J-2 | Spring (inner) | 0.035 | 2 | 3 | 4 | 4 | 2142-055 |
12K-1 | Benzing ring - dia. 9 mm | 0,002 | 2 | 3 | 4 | 4 | 1437-105 |
12K-2 | Benzing ring - dia. 7 mm (SMC and TSMC LP) | 0.001 | 2 | 3 | 4 | 3 | 1437-103 |
12L-1 | Hexagon head screw M10 x 30 | 0.030 | 8 | 12 | 16 | 16 | 1424-192 |
12M-1 | Cover (TSMC HP only) | 0.800 | 1 | 3135-105 | |||
12N-1 | Gasket for cover (TSMC HP only) | 0.010 | 1 | 2353-025 | |||
12P-1 | Look nut - UNF 3/8" (TSMC HP only) | 0.010 | 1 | 1433-100 | |||
12Q-1 | Socket cap screw M4 x 16 (TSMC HP only) | 0.010 | 6 | 1413-007 | |||
12R-1 | 0-ring PRP n 2 12.37x2,62 (TSMC HP only)") | 0.001 | 1. | 1331-013 | |||
12S-1 | Oasket 100 x 100x2 | 0.010 | 2 | 3 | 4 | 4 | 2354-023 |
Frame for unloading mechanism | |||||||
Frame compiete incl. pos. 13E-1 | 3184-216 | ||||||
13A-1 | Suspension rod | 0.290 | 2 | 3 | 4 | 4 | |
13B-1 | Suspension rod | 0.290 | 2 | 3 | 4 | 4 | |
13C-1 | Cross piece | 0.330 | 2 | 3 | 4 | 4 | |
13D-1 | Cross piece | 0.330 | 2 | 3 | 4 | 4 | 3135-188 |
13E-1 | Countersunk screw M6 x 16 | 0,020 | 8 | 12 | 16 | 16 | 1413-092 |
Bracket for unloading mechanism | |||||||
14A-1 | Bracket with pin | 0.065 | 4 | 6 | 8 | 7 | 3135-060 |
14B.1 | Spacing ring | 0.005 | 8 | 12 | 16 | 14 | 2124-003 |
14C-1 | Hexagon head screw M6 x 30 | 0.010 | 8 | 12 | 16 | 14 | 1424-154 |
14D-1 | Spring washer - dia. 6 | 0.005 | 8 | 12 | 16 | 14 | 1437-022 |
Rocker for unloading mechanism | |||||||
15A-1 | Rocker | 0.050 | 8 | 12 | 16 | 16 | 3135-096 |
15B-1 | Bearing for SMC and TSMC LP | 0.006 | 8 | 12 | 16 | 12 | 3135-099 |
15B-2 | Bearing for TSMC HP | 0.006 | 4 | 3135-101 | |||
15C-1 | Spring retainer | 0.001 | 8 | 12 | 16 | 16 | 2145-001 |
15D-1 | Spring | 0.007 | 8 | 12 | 16 | 16 | 2142-061 |
15E-1 | Washer for bearing cup - 0.5 mm | 0.001 | 2114-003 | ||||
Crankshaft -all without certificate | |||||||
16A-1 | Crankshaft for SMC 104S,complete | 42.400 | 1 | 3121-018 | |||
16A -2 | Crankshaft for SMC 106S, complete | 45.400 | 1 | 3121-019 | |||
16A -3 | Crankshaft for SMC 108S and TSMC 108S, complete | 47.600 | 1 | 1 | 3121-020 | ||
16A -4 | Crankshaft for SMC 104L, complete | 45.600 | 1 | 3121-104 | |||
16A -5 | Crankshaft for SMC 106L, compieie | 47.800 | 1 | 3121-105 | |||
16A -6 | Crankshaft for SMC 108L and TSMC 108L, complete | 50.600 | 1 | 1 | 3121-106 | ||
16A-11 | Crankshaft for SMC 104E, complete | 1 | 3121-213 | ||||
16A -12 | Crankshaft for SMC 106E, complete | 1 | 3121-214 | ||||
16A -13 | Crankshaft for SMC 108E and TSMC 108E. complete | 3121-215 | |||||
16B-1 | Plain washer with pin | 0.800 | 1 | 1 | 1 | 1 | 2125-084 |
16C-1 | Key- 18 x 11 x 55 | 0.080 | 1 | 1 | 1 | 1 | 2123-005 |
16D-1 | Hexagon head screw M16 x. 55 | 0.050 | 1 | 1 | 1 | 1 | 1424-104 |
16E-1 | Spring washer-dia. 16 | 0.004 | 1 | 1 | 1 | 1 | 1437-027 |
16F-1 | Plug M12 S-type | 0.010 | 1 | 1 | 1 | 1 | 1413-260 |
16F-2 | Plug 1/4" L-type | 0.010 | 3 | 3 | 3 | 3 | 1343-141 |
Connecting rod | |||||||
17-1 | Connecting rod, compieie SMC and TSMC LP | 2.700 | 4 | 6 | 8 | 6 | 3123-004 |
17-2 | Connecting rod, complete TSMC HP | 2.700 | 2 | 3123-006 | |||
17A-1 | Half-section of bearing | 0.080 | 8 | 12 | 16 | 16 | 2133-003 |
17A-2 | Half-section of bearing [0.5 mm undersize) | 0.080 | 8 | 12 | 16 | 16 | 2133-004 |
17B-1 | Bushing for piston pin SMC and TSMC LP | 0.200 | 4 | 6 | 8 | 6 | 2132-004 |
17B-2 | Needle roller bearing TSMC HP | 0.200 | 2 | 1511-275 | |||
17C-1 | Bolt for connecting rod | 0.055 | 8 | 12 | 16 | 16 | 2111-068 |
17D-1 | Lock nut-3/8" UNF | 0.010 | 8 | 12 | 16 | 16 | 1433-116 |
Piston with pin and rings | |||||||
18-1 | Piston with pin and rings S | 1.320 | 4 | 6 | 8 | 8 | 3124-002 |
18-2 | Piston with pin and rings L | 1.320 | 4 | 6 | 8 | 8 | 3124-052 |
18-3 | Piston with pin and rings E | 1.320 | 4 | 6 | 8 | 8 | 3124-065 |
18A-1 | Piston pin | 0.500 | 4 | 6 | 8 | 8 | 3125-084 |
18B-1 | Piston ring | 0.025 | 8 | 12 | 16 | 16 | 3125-130 |
18C-1 | OH scraper rings | 0.030 | 4 | 6 | 8 | 8 | 3125-065 |
18D-1 | Seeger-ring - dia- 40 (inside diameter) | 0.005 | 8 | 12 | 16 | 16 | 1437-150 |
Cylinder Uner with sction valve | |||||||
19-1 | Cylinder liner with suction valve R717, SMC -TSMC LP, S and L | 4.100 | 4 | 6 | 8 | 6 | 3112-085 |
19-2 | Cylinder liner with suction valve HFC/HCFC, SMC - TSMC LP, S and L | 4.100 | 4 | 6 | 8 | 6 | 3112-086 |
19-3 | Cylinder liner with suction valve R717, SMC-TSMC HP, and L | 4.100 | 2 | 3112-087 | |||
19-4 | Cylinder liner with suction valve HFC/HCFC, TSMC HP. S and L | 4.100 | 2 | 3112-088 | |||
19-5 | Cylinder liner with suction valve R717, SMC -TSMC LP,E | 4.500 | 4 | 6 | 8 | 6 | 3112-081 |
19-6 | Cyiinder liner with suction valve R717. SMC-TSMC HP. E | 4.500 | 2 | 3112-097 | |||
19A-1 | Cylinder liner S and L | 3.500 | 4 | 6 | 8 | 8 | 3112-065 |
19A-2 | Cylinder liner, E | 4.000 | 4 | 6 | 8 | 8 | 3112-080 |
19B-1 | Unloading rings with pins, S and L | 0.400 | 4 | 6 | 8 | 8 | 3135-054 |
19B-2 | Unloading'rings with pins, E | 0.500 | 4 | 6 | 8 | 8 | 3135-173 |
19C-1 | Washer - dia. 8/4,3 x 0,5 | 0.001 | 24 | 36 | 48 | 48 | 2114-001 |
19D-1 | Spring for unloading ring | 0.001 | 24 | 36 | 48 | 48 | 2142-034 |
19E-1 | Tension spring - 342 mm | 0.015 | 4 | 6 | 8 | 8 | 2142-048 |
19F-1 | Ring plate for suction valve | 0.035 | 4 | 6 | 8 | 8 | 3131-021 |
19G-1 | Valve spring | 0.001 | 24 | 36 | 48 | 48 | 2141-047 |
19H-1 | Suction vaive retaining plate R717 | 1.400 | 4 | 6 | 8 | 8 | 3132-083 |
19H-2 | Suction vaive retaining plate R12/R22 | 1.400 | 4 | 6 | 8 | 8 | 3132-095 |
19J-1 | Guide ring for discharge valve | 0.450 | 4 | 6 | 8 | 8 | 3134-008 |
19K-1 | Gasket for cylinder liner - 0,5 mm | 0.005 | 4 | 6 | 8 | 8 | 2356-111 |
19K-2 | Gasket for cylinder liner - 0,8 mm | 0.006 | 4 | 6 | 8 | 8 | 2356-233 |
19M-1 | 0-ring 107,55 x 3,53') TSMC HP | 0.002 | 2 | 1331-085 | |||
19N-1 | Socket cap screw M6 x 30 | 0.010 | 24 | 36 | 48 | 48 | 1413-343 |
19T-1 | Gasket - dia. 163/141 x 0,2 mm | 0.001 | 4 | 6 | 8 | 8 | 2353-140 |
Discharge valve**) | |||||||
20-1 | Discharge valve - R717 - HP | 1.200 | 4 | 6 | 8 | 2 | 3136-089 |
20-2 | Discharge valve-R7l7-LP | 1.200 | 4 | 6 | 8 | 6 | 3136-087 |
20-3 | Discharge valve - HFC/HCFC - HP | 1.200 | 4 | 6 | 8 | 2 | 3136-088 |
20-4 | Discharge valve - HFC/HCFC - LP | 1.200 | 4 | 6 | 8 | 6 | 3136-086 |
20-5 | Discharge valve - HFC/HCFC - VHP | 1.200 | 4 | 6 | 8 | 3136-085 | |
20A-1 | Discharge valve seat | 0.250 | 4 | 6 | 8 | 8 | 3133-027 |
20B-1 | Retaining plate - R717 - HP | 1.000 | 4 | 6 | S | 2 | 3132-092 |
20B-2 | Retaining plate - R717-LP | 1.000 | 4 | 6 | 8 | 6 | 3132-085 |
20B-3 | Retaining plate - HFC/HCPC - HP | 1.000 | 4 | 6 | 8 | 2 | 3132-093 |
20B-4 | Retaining plate - HFC/HCFC - LP | 1.000 | 4 | 6 | 8 | 6 | 3132-091 |
20B-5 | Retaining plate - HFC/HCFC - VHP | 1.000 | 4 | 6 | 8 | - | 3132-082 |
20C-1 | Ring plate | 0.030 | 4 | 6 | 8 | 8 | 3131-015 |
20D-1 | Special screw M 12x 60 | 0.055 | 4 | 6 | 8 | 8 | 1413-121 |
20E-1 | Nut M12x 1,25 | 0.015 | 8 | 12 | 16 | 16 | 1432-075 |
20F-1 | Spring guide | 0.015 | 4 | 6 | 8 | 8 | 2145-008 |
20G-1 | Vaive spring-R717- HP | 0,001 | 32 | 4S | 64 | 16 | 2141-047 |
20G-1 | Valve spring-R717-LP | 1.000 | 24 | 36 | 48 | 36 | 2141-047 |
20G-1 | Valve spring - HFC/HCFC - HP | 0.001 | 43 | 72 | 56 | 24 | 2141-047 |
20G-1 | Valve spring - HFC/HCFC - LP | 0.001 | 24 | 36 | 48 | 36 | 2141-047 |
20G-1 | Valve spring - HFC/HCFC - VHP | 0.001 | 64 | 96 | 128 | 2141-047 |
Compressors are fitted with disharge valves depending on the working conditions. | ||
The valve is selected on the bisis of the refrigerant and the condensing/intermediate pressure temperature of | ||
the plant, indicated in the tabie in 'C. For inst, R22 at TC=53'C=>VHP disharge valve. | ||
Refri-gerant | Conditions | Valve type |
R717 | TC< 15°C | LP |
TC≥15°C | HP | |
HFC/ HCFC | TC <15°C | LP |
45°C R404A-R507 15°C≤ TC<50°C R22 70°C R134a | HP | |
15°C≤ TC<50°C R22 | ||
70°C R134a | ||
45°C R404A-R507 | VHP | |
TC≥ 50°C R22 | ||
70°C134a |
Pos. | Designation | Weight each in kg | Number each compresssor | Part No | |||
SMC 104 | SMC 106 | SMC 108 | TSMC 108 | ||||
Spring for safety head | |||||||
21A-1 | Spring | 0.400 | 4 | 6 | 8 | 8 | 2142-060 |
Oil pressure valve | |||||||
22A-1 | Oil pressure valve, complete | 0.450 | 1 | 1 | 1 | 1 | 3142-150 |
22B-1 | Gasket 90 x 44 x 1 | 0.001 | 1 | 1 | 1 | 1 | 2354-075 |
22C-1 | Hexagon head screw M12 x 35 | 0.040 | 2 | 2 | 2 | 2 | 1424-216 |
Oil charging valve | |||||||
23A-1 | Oil charging valve, complete | 0.300 | 1 | 1 | 1 | 1 | 2412-585 |
23B-1 | Threaded reducing nipple | 0.155 | 1 | 1 | 1 | 1 | 2311-059 |
23C-1 | Socket | 0.075 | 1 | 1 | 1 | 1 | 2313-035 |
23D-1 | Gasket | 0.001 | 1 | 1 | 1 | 1 | 2356-123 |
23E-1 | Gasket | 0.001 | 1 | 1 | 1 | 1 | 2356-140 |
23F-1 | Gasket | 0.001 | 1 | 1 | 1 | 1 | 2356-283 |
23G-1 | Nut | 0.060 | 1 | 1 | 1 | 1 | 2313-027 |
By-pass valves | |||||||
24-1 | By-pass valve dia. 20 22 bar TSMC108HP | 2.400 | 1 | 3137-033 | |||
24-2 | By-pass vaive dia. 20 24 bar TSMC 108 HP | 2.400 | 1 | 3137-010 | |||
24-4 | By-pass valve dia. 28 12 bar TSMC 108LP | 3.600 | 1 | 3137-046 | |||
24-5 | By-pass vaive dia. 28 22 bar SMC | 3.600 | 1 | 1 | 1 | 3137-007 | |
24-7 | By-pass valve dia, 28 24 bar SMC | 3.600 | 1 | 1 | 1 | 3137-009 | |
24B-1 | O-ring for cylinder*) | 0.001 | 1 | 1331-065 | |||
24B-4 | O-ring for cylinder*) | 0.002 | 1 | 1 | 1 | 1 | 1331-067 |
24C-1 | O-ring for cover*) | 0.002 | 1 | 1331-069 | |||
24C-4 | O-ring for cover *) | 0.003 | 1 | 1 | 1 | 1 | 1331-071 |
24D-1 | Hexagon head screw M8 x 25 | 0.015 | 4 | 4 | 4 | 8 | 1424-168 |
24E-1 | Spring washer dia-14,2/8,2 x2 | 0.002 | 4 | 4 | 4 | 8 | 1437-023 |
Pos. | Designation | Weight each in kg | Valve dim. | Number each compresssor | Part No | ||||
SMC 104 | SMC 106 | SMC 108 | TSMC 108 | ||||||
Stop valves | |||||||||
25-1 | Complete valve, disharge KP | 50 | 1 | 2414-073 | |||||
25-2 | Complete valve, inlet HP | 50 | 1 | 2411-261 | |||||
25-3 | Complete valve, disharge LP | 65 | 1 | 1 | 1 | 1 | 2414-069 | ||
25-4 | Complete valve, inlet LP | 100 | 1 | 1 | 1 | 1 | 2414-070 | ||
25A-1 | Valve housing | 50 | 1 | 2432-141 | |||||
25A-2 | Valve housing | 50 | 1 | 2432-141 | |||||
25A-3 | Valve housing | 65 | 1 | 1 | 1 | 1 | 2432-159 | ||
25A-4 | Valve housing | 100 | 1 | 1 | 1 | 1 | 2432-160- | ||
25B-1 | Valve bonnet | 1.740 | 50-65 | 1 | 1 | 1 | 3 | 2433-028 | |
25B-4 | Valve bonnet | 4.500 | 100 | 1 | 1 | 1 | 1 | 2433-030 | |
25C-1 | Front part for cone | 0.095 | 50-65 | 1 | 1 | 1 | 3 | 2444-090 | |
25C-3 | Front part for cone | 0.520 | 100 | 1 | 1 | 1 | 1 | 2444-094 | |
25D-1 | Rear part for cone | 0.185 | 50-65 | 1 | 1 | 1 | 3 | 2444-091 | |
25D-4 | Rear part for cone | 1.000 | 100 | 1 | 1 | 1 | 1 | 2444-095 | |
25E-1 | Screw for valve cone | 0.020 | 50-65 | 1 | 1 | 1 | 3 | 2444-017 | |
25E-4 | Screw for valve cone | 0.120 | 100 | 1 | 1 | 1 | 1 | 2444-018 | |
25F-1 | Gasket for screw dia.31/24 x1,5 | 0.0001 | 50-65 | 1 | 1 | 1 | 3 | 2356-138 | |
25F-4 | Gasket for screw dia, 36/28 x 1,5 | 0.001 | 100 | 1 | 1 | 1 | 1 | 2356-141 | |
25G-1 | Threaded connection | 0.180 | 50-65 | 1 | 1 | 1 | 3 | 2445-053 | |
25G-4 | Threaded connection | 0.400 | 100 | 1 | 1 | 1 | 1 | 2445-061 | |
25H-1 | Sealing ring dia. 62/45 x 3 | 0.004 | 50-65 | 1 | 1 | 1 | 3 | 2354-003 | |
25H-4 | Sealing ring dia. 110/90 x 3 | 0.020 | 100 | 1 | 1 | 1 | 1 | 2354-117 | |
25J-1 | Gasket for bonnet dia. 72,39 x 5.33 | 0.010 | 50-65 | 1 | 1 | 1 | 3 | 1331-154 | |
25J-4 | Gasket for bonnet dia. 116,84 x 7 | 0.015 | 100 | 1 | 1 | 1 | 1 | 1331-198 | |
25K-1 | Spindle | 0.250 | 50-65 | 1 | 1 | 1 | 3 | 2442-023 | |
25K-4 | Spindle | 0.480 | 100 | 1 | 1 | 1 | 1 | 2442-028 | |
25L-1 | Lock washer for spindle | 0.010 | 50-65 | 1 | 1 | 1 | 3 | 2445-019 | |
25L-4 | Lock washer for spindle | 0.015 | 100 | 1 | 1 | 1 | 1 | 2445-020 | |
25M-1 | Packing giand Compl. with o-rings pos. 25R-1 | 0.120 | 50-65 | 1 | 1 | 1 | 3 | 2452-132 | |
25M-4 | Packing gland Compl. with o-rings pos- 25R-4 | 0.250 | 100 | 1 | 1 | 1 | 1 | 2452-133 | |
25N-1 | Guide pin | 0.002 | 50-65 | 1 | 1 | 1 | 3 | 1445-085 | |
25N-4 | Guide pin | 0.002 | 100 | 1 | 1 | 1 | 1 | 1445-085 | |
25P-1 | 0-ring dia. 21,8 x 3,5*) | 0.002 | 50-65 | 1 | 1 | 1 | 1 | 1331-020 | |
25P-4 | 0-ring dia. 28,2 x 3,5*) | 0.002 | 100 | 1331-024 | |||||
25Q-1 | Nylon washer dia. 28.5/28 x 1,5 | 0.001 | 50-65 | 1 | 1 | 1 | 3 | 2354-018 | |
25Q-4 | Nylon washer dia. 48/34 y. 1,5 | 0.002 | 100 | 1 | 1 | 1 | 1 | 2354-017 | |
25R-1 | O-ring dia.17,12 x 3,5*) | 0,001 | 50-65 | 2 | 2 | 2 | 2 | 1331-016 | |
25R-4 | O-ring dia.21.8 x 3,5 | 0.002 | 100 | 2 | 2 | 2 | 2 | 1331-020 | |
25S-1 | Hand wheel dia. 120 | 0.160 | 50-65 | 1 | 1 | 1 | 3 | 1365-036 | |
25S-4 | Hand wheel dia. 180 | 0.800 | 100 | 1 | 1 | 1 | 1 | 1365-035 | |
25T-1 | Screw for hand wheel M5 x 10 | 0.002 | 50-65 | 1 | 1 | 1 | 3 | 1424-140 | |
25T-4 | Screw for hand wheei M8 x 16 | 0.010 | 100 | 1 | 1 | 1 | 1 | 1424-166 | |
25U-1 | Washer for hand wheel | 0.001 | 50-65 | 1 | 1 | 1 | 3 | 1436-024 | |
25U-4 | Washer for hand wheel | 0.003 | 100 | 1 | 1 | 1 | 1 | 1436-026 | |
25Y-3 | Gasket for welding nipple | 0.015 | 50-65 | 1 | 1 | 1 | 1 | 2356-087 | |
25Y-4 | Gasket for welding nipple | 0.025 | 100 | 1 | 1 | 1 | 1 | 2356-104 | |
25Z-1 | Screw valve/compr. M14 x 40 | 0.050 | 50 | 4 | 4 | 4 | 4 | 1424-241 | |
25Z-3 | Screw vaive/cornpr. M14 x 45 | 0.050 | 65 | 4 | 4 | 4 | 4 | 1424-242 | |
25Z-4 | Screw vaive/cornpr. M16 x 45 | 0.095 | 100 | 4 | 4 | 4 | 4 | 1424-102 | |
25AC-3 | Counter flange | 65 | 1 | 1 | 1 | 1 | 2344-019 | ||
25AC-4 | Counter flange | 100 | 1 | 1 | 1 | 1 | 2344-020 | ||
25AD-3 | Welding nippie dia. 65 | 65 | 1 | 1 | 1 | 1 | 2322-103 | ||
25AD-4 | Welding nipple dia. 100 | 100 | 1 | 1 | 1 | 1 | 2322-108 | ||
25AF-3 | Threaded plug 3/4" BSP | 65 | 1 | 1 | 1 | 1 | 2314-065 | ||
25AF-4 | Threaded plug 3/4" BSP | 100 | 1 | 1 | 1 | 1 | 2314-065 | ||
25AG-1 | Gasket for valve/cornpr. | 0.016 | 50 | 2354-105 | |||||
25AG-3 | Gasket for valve/compr. | 0.016 | 65 | 1 | 1 | 1 | 1 | 2354-105 | |
25AG-4 | Gasket for valvs/compr | 0.020 | 100 | 2354-106 | |||||
25AH-3 | Gasket for plug | 0.002 | 65 | 1 | 1 | 1 | 1 | 2356-139 | |
25AH-4 | Gasket for piug | 0,002 | 100 | 1 | 1 | 1 | 1 | 2356-139 | |
25AJ-1 | Screw bonnet/valve M10 x 25 | 50 | 8 | 1424-191 | |||||
25AJ-2 | Screw bonnet/valve M10 x 25 | 50 | 8 | 1424-191 | |||||
25AJ-3 | Screw bonnet/valve M10 x 25 | 65 | 8 | 8 | 8 | 8 | 1424-191 | ||
25AJ-4 | Screw bonnet/valve M12 x 30 | 0.040 | 100 | 8 | 8 | 8 | 8 | 1424-215 | |
25AK-3 | Screw for counter flange M10 x 40 | 0.030 | 65 | 6 | 6 | 6 | 6 | 1424-194 | |
25AK-4 | Screw for counter flange M12 x 50 | 50 | 100 | 6 | 6 | 6 | 6 | 1424-219 |
Pos. | Designation | Weight each in kg | Number each compresssor | Part No | |||
SMC 104 | SMC 106 | SMC 108 | TSMC 108 | ||||
Pressure gauges | |||||||
Suction and pressure gauge | |||||||
30A-1 | R717 | 1.640 | 1 | 1 | 1 | 1 | 1541-108 |
30A-2 | Rl2,R22 and R502 | 1.620 | 1 | 1 | 1 | 1 | 1541-232 |
30A-3 | R22.R134a and R404A | 1.620 | 1 | 1 | 1 | 1 | 1541-074 |
30B-1 | Nozzle and gasket dia.14/0,8 x 1,5 | 0.001 | 1 | 1 | 1 | 1 | 3146-013 |
30C-1 | Gasket dia. 11/4x 1,5 | 0.001 | 1 | 1 | 1 | 1 | 2356-119 |
SMC: discharge pressure gauge | |||||||
31A-1 | R717 | 1.380 | 1 | 1 | 1 | 1541-029 | |
31A-2 | R12,R22 and R502 | 1.400 | 1 | 1 | 1 | 1541-160 | |
31A-3 | R22,R134a and R404A | 1.400 | 1 | 1 | 1 | 1541-075 | |
31B-1 | Nozzle and gasket dia. 14/0,8 x 1,5 | 0.001 | 1 | 1 | 1 | 3146-013 | |
TSMC: discharge pressure gauge | |||||||
31A-3 | R717 | 1.600 | 1 | 1541-101 | |||
31A-4 | R12, R22 and R502 | 1.660 | 1 | 1541-161 | |||
31A-5 | R22,Rl34aandR404A | 1.660 | 1 | 1541-076 | |||
31B-1 | Nozzle and gasket dia. 14/0,8 x 1,5 | 0.001 | 2 | 3146-013 | |||
31C-1 | Screws for gauges M4 x 20 | 6 | 6 | 6 | 6 | 1412-350 | |
Oil filter | |||||||
33-1 | Oil filter complete | 1 | 1 | 1 | 1 | 4524-039 | |
33A-1 | Filter element | 1 | 1 | 1 | 1 | 1517-129 | |
33B-1 | Gasket | 2 | 2 | 2 | 2 | 2356-202 | |
33C-1 | End cover | 1 | 1 | 1 | 1 | 3422-150 | |
33D-1 | Rod for filler | 1 | 1 | 1 | 1 | 2112-145 | |
33E-1 | Shield for oil filter | 1 | 1 | 1 | 1 | 2158-209 | |
33F-1 | Bracket with connection | 1 | 1 | 1 | 1 | 3422-152 | |
33G-1 | Distance piece | 1 | 1 | 1 | 1 | 2212-136 | |
33H-1 | Rubber gasket | 1 | 1 | 1 | 1 | 1334-012 | |
33J-1 | Magnet | 3 | 3 | 3 | 3 | 1517-022 | |
33K-1 | iron ring | 3 | 3 | 3 | 3 | 2114-038 | |
33L-1 | Washer dia, 17/8.4 | 1 | 1 | 1 | 1 | 1436-034 | |
33M-1 | Nut M 8 | 1 | 1 | 1 | 1 | 1433-073 | |
33N-1 | Washer dia-24/13 | 1 | 1 | 1 | 1 | 1436-036 | |
33O-1 | Nut M12 | 1 | 1 | 1 | 1 | 1433-075 | |
33P-1 | O-ring *) | 1 | 1 | 1 | 1 | 1331-009 | |
33Q-1 | O-ring *) | 1 | 1 | 1 | 1 | 1331-008 | |
33R-1 | Cutting ring joint | 1 | 1 | 1 | 1 | 1349-131 | |
Suction filter | |||||||
34A-1 | Suction filter open, complete | 0.365 | 2 | 2 | 2 | 1 | 3425-082 |
34A-2 | Suction filter closed, complete | 0.365 | 1 | 3425-084 | |||
34B-1 | Filter bag | 0.035 | 2 | 2 | 2 | 2 | 3425-083 |
34C-1 | Inset for lifter bag | 0.025 | 2 | 2 | 2 | 2 | 3424-058 |
34D-1 | 0-ring PRP 337 - 75,56 x 5,33 *) | 0.008 | 2 | 2 | 2 | 3 | 1331-042 |
34E-1 | Cover for suction filter | 2.400 | 2 | 2 | 2 | 1 | 3422-103 |
34F-1 | 0-ring PRP 239 - 91,67 x 3,53 *) | 0.003 | 2 | 2 | 2 | 1 | 1331-080 |
34G-1 | Hexagon head screw M 12 x 40 | 0.050 | 8 | 6 | 8 | 4 | 1424-217 |
34H-1 | Spring washer dia. 12 | 0.005 | 8 | 8 | 8 | 4 | 1437-026 |
Discharge pipe for oil filter | |||||||
38A-1 | Discharge pipe for oil pump | 0.500 | 1 | 1 | 1 | 1 | 3141-110 |
38B-1 | Inside pipe connection to control | 0.090 | 1 | 1 | 1 | 1 | 3141-162 |
system (compr. without oil cooler) | |||||||
38B-2 | Inside pipe connection to control | 0.090 | 1 | 1 | 1 | 1 | 3141-163 |
system (compr. with OSSI oil cooler | |||||||
R717) | |||||||
38B-3 | Inside pipe connection to contro! | 0.090 | 1 | 1 | 1 | 1 | 3141-164 |
system (compr. with HE8 oH cooler | |||||||
HCFC) | |||||||
38C-1 | Connection for disharge pipe - | 0.120 | 1 | 2333-025 | |||
SMC 104 | |||||||
38C-2 | Connection for disharge pipe - | 0.190 | 1 | 2333-025 | |||
SMC 106 | |||||||
38C-3 | Connection for disharge pipe - | 0.180 | 1 | 1 | 2333-026 | ||
SMC 108 and TSMC 108 | |||||||
38D-1 | O-ring PRP 212 - 21,80 x 3.53*) | 0.002 | 2 | 2 | 2 | 2 | 1331-020 |
38E-1 | O-ring PRP 321 - 29.51 x 5,33*) | 0.004 | 1 | 1 | 1 | 1 | 1331-039 |
38F-1 | Gasket dia- 27/21 x 1,5 | 0.001 | 1 | 1 | 1 | 1 | 2356-133 |
38G-1 | O-ring dia. 26.58 x 3,5*) | 0.002 | 1 | 1 | 1 | 1 | 1331-023 |
Analogous control and safety | |||||||
equipment | |||||||
39A-1 | Gauge panel | 0.070 | 1 | 1 | 1 | 1 | 3146-042 |
39B-1 | Socket cap screw M10 x 60 | 0.045 | 2 | 2 | 2 | 2 | 1413-382 |
39C-1 | Console | 1 | 1 | 1 | 1 | 2213-142 | |
39D-1 | Bar for controls (4 controls) | 1 | 1 | 1 | 2213-143 | ||
39D-2 | Bar for controls (5 controls) | 1 | 1 | 1 | 1 | 2213-144 | |
390-3 | Bar for controls (6 controls) | 1 | 1 | 1 | 1 | 2213-145 | |
39D-4 | Bar for controls (7 controls) | 1 | 1 | 1 | 1 | 2213-154 | |
39D-5 | Bar for controls (US, SMC) | 1 | 1 | 1 | 2213-368 | ||
39D-6 | Bar for controls (US, TSMC) | 1 | 2213-369 | ||||
39E-1 | Hexagon head screw M6 x 12 | 2 | 2 | 2 | 2 | 1424-150 | |
39F-1 | Spring washer dia. 11/6 | 2 | 2 | 2 | 2 | 1437-022 | |
39G-1 | Socket cap screw M4 x 6 | 1412-200 | |||||
39H-1 | Spring washer dia. 7/4 | 1437-020 | |||||
39J-1 | Socket cap screw M5 x 10 | 4 | 4 | 4 | 4 | 1413-330 | |
39K-1 | Spring washer dia. 9/5 | 4 | 4 | 4 | 4 | 1437-021 | |
Cooling water connection See section: Water cooling oi reciprocating compressor | |||||||
40A-1 | Set of hoses for cooling water SMC104 | 0.940 | 1 | 3185-154 | |||
40A-2 | Set of hoses for cooling water SMC 106 | 1.000 | 1 | 1 | 3185-155 | ||
40A-3 | Set of hoses for cooling water SMC l08 and TSMC108 | 1.400 | 1 | 1 | 3185-156 | ||
40B-1 | Hose connection - 3/8" - straight | 0.004 | 12 | 14 | 16 | 16 | 2334-025 |
40C-1 | Anote - 3/8" | 0.009 | 8 | 10 | 10 | 10 | 1341-090 |
40D-1 | T-piece | 0.015 | 2 | 2 | 2 | 2 | 1341-141 |
40E-1 | Hose clamp | 0.015 | 12 | 14 | 16 | 16 | 1345-168 |
40F-1 | Cable binder | 3 | 3 | 3 | 3 | 1554-062 | |
Purge valve | |||||||
42A-1 | Purge valve | 0.300 | 1 | 1 | 1 | 2 | 2412-585 |
42B-1 | Threaded nipple | 1 | 1 | 1 | 1 | 1349-078 | |
42C-1 | Cutting ring | 0.135 | 1 | 1 | 1 | 2 | 1349-062 |
42D-1 | Nut | ||||||
42E-1 | Nut | 0.070 | 1 | 1 | 1 | 2 | 2313-045 |
42F-1 | Connection pipe with collar | 0.025 | 1 | 1 | 1 | 2 | 2334-027 |
42G-1 | Gasket | 0.001 | 2 | 2 | 2 | 4 | 2356-123 |
42H-1 | Nut | 0.060 | 1 | 1 | 1 | 2 | 2313-027 |
Pressure and temperature controls Pressure controls for R717 | |||||||
45A-1 | KP5A | 0.300 | 1 | 1 | 1 | 1 | 1373-125 |
45B-1 | KP15A | 0.460 | 1 | 1 | 1 | 1 | 1373-142 |
45C-1 | MP55A | 0.900 | 1 | 1 | 1 | 1 | 1373-162 |
42F-1 | Connection pipe with collar | 0.025 | 1 | 1 | 1 | 1 | 2334-027 |
42G-1 | Gasket | 0.001 | 2 | 2 | 2 | 2 | 2356-123 |
42H-1 | Nut | 0.060 | 1 | 1 | 1 | 1 | 2313-027 |
Pressure controls for R22, R134a and R404A | |||||||
45D-1 | KP5 | 0,3 | 1 | 1 | 1 | 1 | 1373-123 |
45E-1 | KP15 | 0.460 | 1 | 1 | 1 | 1 | 1373-135 |
45F-1 | MP55 | 0.800 | 1 | 1 | 1 | 1 | 1373-159 |
Temperature controls: | |||||||
45G-1 | KP98 | 0.720 | 1 | 1 | 1 | 1 | 1373-043 |
45H-1 | KP77 | 0.350 | 1 | 1 | 1 | 1 | 1373-044 |
45J-1 | Phail pocket for temperature controls | 0.770 | 1 | 1 | 1 | 1 | 1377-171 |
45K-1 | Gasket | 1 | 1 | 1 | 1 | 2356-133 | |
AMR 312 S coupling | |||||||
48A-4 | Disc pack | 1.132 | 2 | 2 | 2 | 2 | 1524-157 |
48B-4 | Bolt | 0.054 | 16 | 16 | 16 | 16 | 1524-165 |
48С4 | Bevel washer | 0.010 | 4 | 4 | 4 | 4 | 1524-187 |
48D-4 | Lock nut | 0.018 | 16 | 16 | 16 | 16 | 1524-173 |
48E-4 | Washer | 0.008 | 16 | 16 | 16 | 16 | 1524-181 |
Capacity regulation | |||||||
50A-1 | Valve body with 1 solenoid valve without coil | 1 | 3143-383 | ||||
50A-2 | Valve body with 2 solenoid valves without coils | 1 | 1 | 3143-384 | |||
50A-3 | Valve body with 3 solenoid valves without coils | 1 | 3143-385 | ||||
50A-4 | Valve body with 4 solenoid valves without coils | 1 | 3143-386 | ||||
50B-1 | Coil 220/230V, 50/60 Hz. 10 W | 0.260 | 1372-537 | ||||
50B-2 | Coil 110V, 50/60 Hz, 10W | 0.260 | 1372-538 | ||||
50B-3 | Cod 240V, 50 Hz, 10 W | 0.062 | 1372-539 | ||||
50C | Solenoid vatve (service kit for one solenoid valve) | 1372-424 | |||||
Crankcase heater | |||||||
57A-1 | Crankcase heater - 270 W - 115 V, 1 1/4" BSP | 1 | 1 | 1 | 1 | 3181-034 | |
57A-2 | Crankcase heater - 270 W - 230 V, 1 1/4" BSP | 1 | 1 | 1 | 1 | 3181-035 | |
57A-3 | Crankcase heater - 270 W - 250 V, 1 1/4" BSP | 1 | 1 | 1 | 1 | 3181-036 | |
57B-1 | Gasket dia- 50/43 x 1,5 for 1 1/4" BSP | 0.002 | 1 | 1 | 1 | 1 | 2356-150 |
80 | Sofenoide valve blok, complete with 0.6 mm orifice for oil return. Excl. coil | 2.040 | 1 | 1 | 1 | 1 or 2 | 1372-179 |
Strainer kit consist of: | 1 | 1 | 1 | 1 or 2 | 1372-089 | ||
80E | Strainer | ||||||
80G | Al-gasket | ||||||
Service kit consist of: | 1 | 1 | 1 | 1 or 2 | 1372-086 | ||
80P | Armature tube | ||||||
80H | Armature | ||||||
80K | O-ring | ||||||
80M | O-ring | ||||||
80L | Ai-gasket | ||||||
80N | Snap fastener | ||||||
Seal kit consist of: | 1 | 1 | 1 | 1 or 2 | 1372-091 | ||
80G | Al-gasket | ||||||
80K | O-ring | ||||||
80M | O-ring | ||||||
80L | Al-gasket | ||||||
80Q | Al-gasket | ||||||
Orifice kit 0,6 mm consist of: | 1 | 1 | 1 | 1 or 2 | 1371-034 | ||
80L | At-gasket | ||||||
80Q | At-gasket | ||||||
80I | Orifice 0,6 mm | ||||||
Onftce kit 0,8 mm consist of: | 1 | 1 | 1 | 1 or 2 | 1371-035 | ||
80L | Al-gasket | ||||||
80Q | Al-gasket | ||||||
80I | Orifice 0.8 mm | ||||||
Orifice kit 1,0 mm consist of: | 1 | 1 | 1 | 1 or 2 | 1371-036 | ||
80L | Al-gasket | ||||||
80Q | Al-gasket | ||||||
80I | Orifice 1,0 mm | ||||||
Orifice kit 3.3 mm(for thermopump only) consist of: | 1 | 1 | 1 | 1 or 2 | 1371-037 | ||
80L | Al-gasket | ||||||
80Q | Al-gasket | ||||||
80I | Orifice 3.3 mm | ||||||
80J-1 | Coil 220/230V, 50/60 H2, 10 W | 0.285 | 1372-537 | ||||
80J-2 | Coil 110V, 50/60 Hz, 10W | 0.285 | 1372-538 | ||||
80J-3 | Coil 240 V, 50 Hz, 10W | 0.285 | 1372-539 | ||||
80J-4 | Coil 24 V. SO Hz, 10 W | 0.285 | 1372-541 | ||||
Intermediate pressure connections | |||||||
90A-1 | Mixing chamber with flange | 9.500 | 1 | 3114-095 | |||
90B-1 | Counter flange for mixing chamber | 1.700 | 1 | 3115-084 | |||
90C-1 | Intermediate ring | 0.392 | 1 | 3422-100 | |||
90D-1 | 0-ring PRP 236 - 82,15 3.53 ') | 0.002 | 1 | 1331-077 | |||
90E-1 | 0-ringPRP241 -98.02x3,5') | 0.002 | 1 | 1331-081 | |||
90F-1 | Hexagon head screw M12 x 65 | 0.065 | 4 | 1424-222 | |||
90G-1 | Hexagon head screw Ml 4 x 55 | 0.065 | 4 | 1424-246 | |||
90H-1 | Hexagon head screw Ml 4 x 55 | 0.005 | 4 | 1437-026 | |||
90J-1 | Spring washer dia. 12 | 0.004 | 4 | 1437-030 | |||
90K-1 | Spring washer dia. 14 | 0.025 | 4 | 1432-066 | |||
90L-1 | Nut M14 | 0.003 | 1 | 1331-080 | |||
90M-1 | 0-ring PRP 239-91 ,67 x 3,53 *) | 0.065 | 1 | 2313-027 | |||
90N-1 | CapGasket dia. 18/10 x 1.5 | 0.002 | 1 | 2356-123 | |||
Oil cooling - type HE8 S for R22 | |||||||
92A-1 | Oil cooler | 1 | 1 | 1 | 1 | 4242-038 | |
92B-1 | Stop valve 8MSL 10 | 0.300 | 1 | 1 | 1 | 1 | 1374-171 |
92C-1 | Thermostatic expansion valve TX 2 - 0,5 | 0.400 | 1 | 1 | 1 | 1 | 1371-305 |
92D-1 | Solenoid valve without coil | 0.346 | 1 | 1 | 1 | 1 | 1372-422 |
92N-1 | Coil 220/230V, 50/60 Hz, -10 W | 0.260 | 1372-537 | ||||
92N-2 | Coil 110V, 50/60 Hz, 10W | 0.260 | 1372-538 | ||||
92N-3 | Coil 240V, 50 Hz, 10W | 0.260 | 1372-539 | ||||
92E-1 | Filter | 0.320 | 1 | 1 | 1 | 1 | 4522-002 |
90F-1 | Screwed connection GE 10-LR 1/4" | 0.050 | 6 | 6 | 6 | 6 | 1349-051 |
92G-1 | Single banjo connector DSVW 10-LR | 0.160 | 1 | 1 | 1 | 1 | 1349-089 |
92H-1 | Threaded nipple | 0.110 | 1 | 1 | 1 | 1 | 2314-056 |
92J-1 | Threaded plug for 8/6 mm pipe | 0.015 | 2 | 2 | 2 | 2 | 2314-053 |
92K-1 | Gasket dia. 19/14 x 1,5 - aluminium | 0.001 | 2 | 2 | 2 | 2 | 2356-124 |
92L-1 | Connection piece for 1 pipe dia. 8 mm | 0.030 | 2 | 2 | 2 | 2 | 2333-021 |
92M-1 | Gasket- dia. 27/21 x 1,5 - aluminium | 0,001 | 3 | 3 | 3 | 3 | 2356-133 |
Oil cooling - type OOSl for R717 | |||||||
93A-1 | Oil cooler | 1 | 1 | 1 | 1 | 4242-029 | |
93B-1 | Stop valve SN 6 | 1 | 1 | 1 | 1 | 2413-010 | |
93C-1 | Thermostatic injection TEAT 20-2 | 0.400 | 1 | 1 | 1 | 1 | 1371-240 |
93D-1 | Solenoid valve without coil | 0.346 | 1 | 1 | 1 | 1 | 1372-422 |
93N-1 | Coil 220/230V. 50/60 Hz, 10 W | 0.260 | 1372-537 | ||||
93N-2 | Coil 110V, 50/60 Hz, 10W | 0.260 | 1372-538 | ||||
93N-3 | Coil 240V, 50Hz.Tow | 0.260 | 1372-539 | ||||
93E-1 | Filter | 0.320 | 1 | 1 | 1 | 1 | 4522-002 |
93F-1 | Screwed connection GE 10-LR 1/4" | 0.050 | 6 | 6 | 6 | 6 | 1349-051 |
93G-1 | Single banjo connector DSVW 10-LR | 0.160 | 1 | 1 | 1 | 1 | 1349-089 |
93H-1 | Threaded nipple | 0.110 | 1 | 1 | 1 | 1 | 2314-056 |
93J-1 | Threaded piug for dia. 8/6 mm pipe | 0.015 | 4 | 4 | 4 | 4 | 2314-053 |
93K-1 | Gasket dia. 19/14 x 1.5 - alunimium | 0.001 | 8 | 8 | 8 | 8 | 2356-124 |
93L-1 | Connection piece for 1 pipe dia. 8 mm | 0.030 | 4 | 4 | 4 | 4 | 2333-021 |
93M-1 | Gasket dia. 27/21 x 1,5 - aluminium | 0.001 | 3 | 3 | 3 | 3 | 2356-133 |
Chain drive for oil pump | |||||||
96A-1 | Hub for chain wheel (chranshaft) | 1 | 1 | 1 | 1 | 2126-020 | |
96B-1 | Hub for chain wheel (oil pump) | 1 | 1 | 1 | 1 | 2126-019 | |
96C-1 | Chain wheel (crankshaft) | 1 | 1 | 1 | 1 | 2126-018 | |
96D-1 | Chain wheel (oi! pump) | 1 | 1 | 1 | 1 | 2126-017 | |
96E-1 | Chain | 1 | 1 | 1 | 1 | 1521-102 | |
96F-1 | Hexagon head screw | 5 | 5 | 5 | 5 | 1424-150 | |
96G-1 | Spring washer | 5 | 5 | 5 | 5 | 1437-022 | |
96H-1 | Shield for oil | 1 | 1 | 1 | 1 | 3141-128 | |
98 | Thermo pump | ||||||
98A-1 | Side cover for thermo pump | 1 | 1 | 1 | 1 | 3113-145 | |
98B-1 | Monitor box | 1 | 1 | 1 | 1 | 1553-215 | |
Alien screw M4 x 16 | 2 | 2 | 2 | 2 | 1412-204 | ||
Spring washer dia. 4 | 2 | 2 | 2 | 2 | 1437-020 | ||
98C-1 | Level indicator | 2 | 2 | 2 | 2 | 3185-038 | |
98D-1 | Outer part for level indicator | 2 | 2 | 2 | 2 | 3185-034 | |
98E-1 | Washer dia. 20/13x1.5 | 2 | 2 | 2 | 2 | 2356-125 | |
98F-1 | Rubber cap | 2 | 2 | 2 | 2 | 1554-194 | |
98G-1 | Solenoid valve without coil | 1 | 1 | 1 | 1 | 1372-422 | |
98H-1 | Solenoid valve without coil | 1 | 1 | 1 | 1 | 1372-423 | |
98J-1 | Coil 220/230V, 50/60 Hz, 10 W | 0,285 | 1372-537 | ||||
98J-2 | Coil 110V, 50/60 H2. 10W | 0.285 | 1372-538 | ||||
98J-3 | Coil 240V. 50 Hz, 10W | 0,285 | 1372-539 | ||||
98K-1 | Check valve | 2 | 2 | 2 | 2 | 1364-008 | |
Straight joint 10 mm BSP | 6 | 6 | 8 | 5 | 1349-051 | ||
Socket 10 mm BSP | 5 | 5 | 4 | 4 | 1349-101 | ||
T-joint 10 mm | 3 | 4 | 5 | 1 | 1349-041 | ||
Strap for stop valve | 1 | 1 | 1 | 1 | 2212-059 | ||
Cable binder no. 10 | 1 | 1 | 1 | 1 | 1554-054 | ||
Allen screw M4 x 12 | 2 | 2 | 2 | 2 | 1412-203 | ||
Nut M4 | 2 | 2 | 2 | 2 | 1432-035 | ||
98L-1 | Washer dia. 29/21 x 1,5 | 2 | 2 | 2 | 2 | 2356-136 | |
98M-1 | VA-joint with nozzle 1,2 mm | 3 | 4 | 5 | 2314-097 | ||
98M-2 | VA-joint with nozzle 0,6 mm | 1 | 2314-100 | ||||
Angle joint | 3 | 3 | 2 | 1 | 1349-033 | ||
Angle swivel joint 8 mm | 4 | 4 | 4 | 1349-087 | |||
Angle swivel joint 10 mm | 3 | 3 | 2 | 1 | 1349-089 | ||
Angle joint 10 mm | 1 | 1349-112 | |||||
Bushing 1/4" x 1/2" RG | 2 | 1 | 1 | 2312-013 | |||
Threaded nipple | 1 | 1 | 2314-056 | ||||
Gasket dia. 27/21 x 1,5 Al | 2 | 2 | 2 | 2356-133 | |||
Gasket dia. l9/14 x 4 Al | 3 | 3 | 3 | 1 | 2356-283 | ||
Pipe strap dia. 10x15 | 2 | 1 | 1377-117 | ||||
Hexagon set screw M6 x 12 | 1 | 1 | 1424-150 | ||||
Nut M6 | 1 | 1432-061 | |||||
Allen screw M5 x 10 | 1 | 1413-330 | |||||
Washer dia. 12,5/6,4 x 1,6 | 2 | 1436-033 | |||||
Spring washer for M6 | 1 | 1437-021 | |||||
98N-1 | Filter | 1 | 1 | 1 | 1 | 4522-002 | |
98P-1 | Stop valve. | 1 | 1 | 1 | 1 | 2412-277 | |
98Q-1 | Cooling cover | 1 | 1 | 1 | 1 | 3113-143 | |
98R-1 | Gasket for side cover | 1 | 1 | 1 | 1 | 2353-189 | |
98S-1 | Hexagon head screw M14 x 80 | 16 | 16 | 16 | 16 | 1424-081 | |
98T-1 | Oil cooler OSSI | 1 | 1 | 1 | 1 | 4242-029 | |
Socket 1/4" | 1 | 1 | 1 | 1 | 1349-101 | ||
98U | Solenoid valve without coil | 1 | 1 | 1 | 1372-422 | ||
98V | Solenoid valve without coii | 1 | 1 | 1 | 1 | 1372-422 | |
98AB-1 | Coil 220/230V, 50/60 Hz, 10 W | 0.285 | 1372-537 | ||||
98AB-2 | Coii 110V, 50/60 Hz. 10W | 0.285 | 1372-538 | ||||
98AB-3 | Coil 240V, 50 Hz, 10 W | 0.285 | 1372-539 | ||||
98X | PT100 sensor | 1 | 1 | 1 | 1 | 1373-253 | |
98Y | Stop valve | 1 | 1 | 1 | 1 | 2412-277 | |
98Z | Non-return valve | 1 | 1 | 1 | 1 | 1364-022 | |
98AA | Screw joint | 1 | 1 | 1 | 1 | 2314-105 | |
UNISAB | |||||||
99A-1 | Support for UNISAB | 1 | 1 | 1 | 1 | 2213-500 | |
99B-3 | Distance washers | 4 | 4 | 4 | 4 | 2212-130 | |
99C-1 | Screw for support M10 x 20 | 2 | 2 | 2 | 2 | 1424-190 | |
99D-1 | Screw for UNlSAB M6 x 20 | 4 | 4 | 4 | 4 | 1424-152 | |
99E-1 | Washers dia, 22/7 x 1,5 | 4 | 4 | 4 | 4 | 1436-025 |
Toots set for compressor |
SMC 104-116 Mk3 & TSMC 108-116 Mk3. type S-L-E |
Line no. A600 = Normal set, tools set no 3183-109 |
Line no. A601 = Extended set, tools set no 3183-110 |
Line no. A602A = Tools for coupling (SMC 104-108) |
Line no. A602B =Toots for coupling (SMC 112-116) |
Line no. A603 = Toots for alignment of coupling |
Pos.No | Designation | Dimension | Line No | Part No | ||||
A600 | A601 | A602 | A603 | |||||
A | B | |||||||
1-1 | Clamp with screw, compr. type S and L | 4 | 4 | 3183-144 | ||||
1-2 | Clamp with screw, compr. type E | 4 | 4 | 3183-145 | ||||
2 | Tools for shaft seal | 1 | 1 | 3183-139 | ||||
3 | Tommy screw for cylinder liner | 2 | 2 | 3183-041 | ||||
4 | Theaded plug for unloading cylinder | 3/8"BSP | 2 | 2 | 2314-017 | |||
5 | Supporting plate for pistons | 8 | 8 | 3183-115 | ||||
6 | Spanner for heating cartridge | NV 55 | 1 | 1 | 3183-060 | |||
7 | Trigger for coupling or belt pulley | 1 | 1 | 3183-059 | ||||
8 | Adjusting jig for coupling | 1 | 3183-105 | |||||
9-1 | Wrench for cylinder screw | NV 4 | 1 | |||||
9-2 | Wrench for cylinder screw | NV 5 | 1 | |||||
9-3 | Wrench for cylinder screw | NV 8 | 1 | |||||
9-4 | Wrench for cylinder screw | NV 10 | 1 | |||||
9-5 | Special wrench for shaft seal | NV 4 | 1 | 1612-392 | ||||
10-1 | Retaining-ring plier | J21/G | 1 | |||||
10-2 | Retaining-ring plier | A11/G | 1 | |||||
11-1 | Open end and ring spanner | NV 10 | 1 | |||||
11-2 | Open end and ring spanner | NV 17 | 1 | |||||
11-3 | Open end and ring spanner | NV 19 | 1 | |||||
11-4 | Open end and ring spanner | NV 22 | 1 | |||||
11-5 | Open end and ring spanner | NV 24 | 1 | |||||
11-6 | Open end and ring spanner | NV 27 | 1 | |||||
13-1 | Socket wrench | NV10 | 1 | |||||
13-2 | Socket wrench | NV13 | 1 | |||||
13-3 | Socket wrench | NV17 | 1 | |||||
13-4 | Socket wrench | NV19 | 1 | |||||
13-5 | Socket wrench | NV22 | 1 | |||||
13-6 | Socket wrench | NV24 | 1 | 1 | 1 | |||
13-7 | Socket wrench | NV27 | 1 | |||||
13-8 | Socket wrench | NV30 | 1 | |||||
13-9 | Socket wrench | NV32 | 1 | |||||
13-10 | Socket wrench | NV9/16" | 1 | |||||
13-11 | Socket wrench | NV 3/4" | 1 | 1 | ||||
13-12 | Socket wrench | NV11/16" | 1 | 1 | ||||
14 | Ratchet handle | 1 | ||||||
15 | Speed handle | 1 | ||||||
16 | Universal joint for socket wrench | 1 | ||||||
17-1 | Extension rod for socket wrench | 1 | ||||||
17-2 | Extension rod for socket wrench | 1 | ||||||
19-1 | Torque wrench 15-90 Nm | 1 | ||||||
19-2 | Torque wrench 40-200 Nm | 1 | 1 | 1 | ||||
20 | Coupler for torque wrench 1/2 | 2 | 1 | 1 | ||||
21-1 | Open spanner for torque wrench | NV 11/16" | 1 | 1 | ||||
21-2 | Open spanner for torque wrench | NV 3/4" | 1 | 1 | ||||
22 | Feeler gauge | 1 | 1 |
Spare parts for SMC 112-116 & TSMC116Mk3
Spare parts for SMC 112-116 & TSMC116Mk3 | ||||||
Type S-L and E | ||||||
Relevant drawings lor compressor | SMC | TSMC | ||||
SMC 100 Mk 3, S-L-E (delivered after 89.10) | 0661-523 | 0661-524 | ||||
Cylinder liner ect. SMC-TSMC 112, 116 Mk3 (after 89.10) | 0661-525 | |||||
SMC 100 Mk3 | 0661-757 | 0661-758 | ||||
Cylinder liner ect. SMC - TSMC 100 Mk3 | 0661-605 | |||||
*) If the compressor runs as heat pump, this must be mentioned when ordering, to ensure a correct delivery | ||||||
Pos- | Designation | Weight each in kg | Number each compressor | Part No | ||
SMC 112 | SMC 116 | TSMC 116 | ||||
Compressor frame | ||||||
1A-1 | Frame SMC 112 | 572.000 | 1 | 3111-071 | ||
1A-2 | Frame SMC 116 | 560.000 | 1 | 3111-069 | ||
1A-3 | Frame TSMC 116 | 560.000 | 1 | 3111-070 | ||
1B-1 | Oil level glass dia. 80 | 0.230 | 2 | 2 | 2 | 1226-015 |
1C-1 | O-ring PRP 137-52,07x 2,62*) | 0.002 | 2 | 2 | 2 | 1331-140 |
1D-1 | Hexagon head M6 x 18 | 0.010 | 8 | 8 | 8 | 1424-148 |
1E-1 | Intermediate flange | 0.010 | 1 | 1 | 1 | 2333-053 |
Top cover - air cooled | ||||||
2A-1 | Top cover S-L | 19.000 | 6 | 8 | 7 | 3113-191 |
2A-2 | Top cover with flange S-L | 20.500 | 1 | 3113-192 | ||
2A-3 | Top cover E | 19.000 | 6 | 8 | 7 | 3113-177 |
2A-4 | Top cover with flange E | 20.500 | 1 | 3113-176 | ||
2C-1 | Gasket for top cover | 0.020 | 6 | 8 | 8 | 2353-151 |
2E-1 | Hexagon head M14 x 90 | 0.120 | 96 | 128 | 128 | 1424-083 |
2F-1 | Hexagon head M14 x 12C | 0.165 | 2 | 1424-090 | ||
2G-1 | Washer for M14 dia. 28/15 x 2,5 | 0.010 | 96 | 128 | 128 | 1436-037 |
Pos- | Designation | Weight each in kg | Number each compressor | Part No | ||
SMC 112 | SMC 116 | TSMC 116 | ||||
Top cover - water cooled (see sketch below) | ||||||
2A-1 | Top covers S-L | 19.000 | 6 | 8 | 7 | 3113-191 |
2A-2 | Top cover with flange S-L | 20.500 | 1 | 3113-192 | ||
2A-3 | Top cover E | 19.000 | 6 | 8 | 7 | 3113-177 |
2A-4 | Top cover with flange E | 20.500 | 1 | 3113-176 | ||
2B-1 | Water cover for cover with flange | 5.800 | 1 | 3113-195 | ||
2B-2 | Water cover left | 5.800 | 3 | 4 | 4 | 3113-193 |
2B-3 | Water cover right | 5.800 | 3 | 4 | 3 | 3113-194 |
2C-1 | Gasket for top cover | 0.020 | 6 | 8 | 8 | 2353-151 |
2D-1 | Gasket for water cover pos. 2B-1 | 0.020 | 1 | 2353-176 | ||
2D-2 | Gasket for water cover pos. 2B-2/2B-3 | 0.020 | 6 | 8 | 7 | 2353-175 |
2E-2 | Hexagon head screw M14 x 110 | 0.150 | 96 | 128 | 128 | 1424-087 |
2F-1 | Hexagon head screw M14 x 120 | 0.165 | 2 | 1424-090 | ||
2G-1 | Washer for M14, dia. 28/15 x 2,5 | 0.010 | 96 | 128 | 128 | 1436-037 |
2H-1 | Hexagon head screw M10 x 35 | 0.050 | 12 | 16 | 16 | 1424-193 |
2J-1 | Washer for M 10, dia. 21 /10,5 x 2 | 0.008 | 12 | 16 | 16 | 1436-035 |
Side cover - air cooled | ||||||
3A-1 | Side cover | 10.900 | 4 | 4 | 4 | 3113-148 |
3C-1 | Gasket for side cover | 0.020 | 4 | 4 | 4 | 2353-151 |
3E-1 | Hexagon head screw M14 x 65 | 0.045 | 64 | 64 | 64 | 1424-246 |
3G-1 | Washer for M14, dia. 28/15 x 2,5 | 0.010 | 64 | 64 | 64 | 1436-037 |
Side cover - water cooled | ||||||
3A-2 | Side cover with cooling fins | 15.000 | 4 | 4 | 4 | 3113-140 |
3B-1 | Water cover | 5.800 | 4 | 4 | 4 | 3113-138 |
3C-1 | Gasket for side cover | 0.020 | 4 | 4 | 4 | 2353-151 |
3D-1 | Gasket for water cover | 0.020 | 4 | 4 | 4 | 2353-154 |
3E-2 | Hexagon head screw M14 x 55 | 0.065 | 56 | 56 | 56 | 1424-244 |
3F-1 | Hexagon head screw M14 x 35 | 0.045 | 8 | 8 | 8 | 1424-240 |
3G-1 | Washer for M14, dia. 28/15 x 2.5 | 0.010 | 64 | 64 | 64 | 1436-037 |
3H-1 | Hexagon head screw M12 x 40 | 0.050 | 4 | 4 | 4 | 1424-217 |
3J-1 | Washer for M12, dia. 24/13 x 2,5 | 0.008 | 4 | 4 | 4 | 1436-036 |
End cover at pump end | ||||||
4A-1 | End cover | 17.950 | 1 | 1 | 1 | 3113-028 |
4B-1 | Gasket | 0.020 | 1 | 1 | 1 | 2353-011 |
4C-1 | Hexagon head screw M14 x 100 | 0.150 | 14 | 14 | 14 | 1424-085 |
4D-1 | Washer for M14 dia. 28/15 x 2,5 | 0.010 | 14 | 14 | 14 | 1436-037 |
Bearing cover at pump end | ||||||
5A-1 | Bearing cover | 9.100 | 1 | 1 | 1 | 3113-031 |
5B-1 | Hexagon head screw M14 x 35 | 0.055 | 6 | 6 | 6 | 1424-240 |
5C-1 | Bushing | 1.200 | 1 | 1 | 1 | 2132-021 |
5C-2 | Bushing for repair (0,5 mm undersize) | 1.220 | 1 | 1 | 1 | 2132-022 |
5D-1 | Gasket - 0,3 mm | 0.005 | 1 | 1 | 1 | 2353-013 |
5D-2 | Gasket - 0,5 mm | 0.006 | 1 | 1 | 1 | 2353-100 |
5D-3 | Gasket - 0,75 mm | 0.010 | 1 | 1 | 1 | 2353-014 |
5D-4 | Gasket -1,0 mm | 0.015 | 1 | 1 | 1 | 2353-015 |
Bearing cover at shaft seal end | ||||||
6A-1 | Bearing cover | 23.000 | 1 | 1 | 1 | 3113-124 |
6B-1 | Hexagon head screw M14 x 60 | 0.085 | 14 | 14 | 14 | 1424-245 |
6C-3 | Bushing | 1.200 | 1 | 1 | 1 | 2132-021 |
6C-4 | Bushing for repair (0,5 mm undersize) | 1.200 | 1 | 1 | 1 | 2132-022 |
6D-1 | Gasket | 0.020 | 1 | 1 | 1 | 2353-011 |
6E-1 | Washer for M14, dia. 28/15 x 2,5 | 0.010 | 14 | 14 | 14 | 1436-037 |
6F | Valve for prelubrication | 1 | 1 | 1 | 2412-585 | |
6G | Nut | 1 | 1 | 1 | 2313-045 | |
6H | Special joint | 1 | 1 | 1 | 2334-027 | |
6J | Cap | 1 | 1 | 1 | 2313-027 | |
6K | Joint 3/8" | 1 | 1 | 1 | 1349-053 | |
6L | Alu gasket | 1 | 1 | 1 | 2356-123 | |
Shaft seal type SB100 Revision 1 for compressor nos. up to 98379 | ||||||
Spare parts kit: | 1 | 1 | 1 | 3184-225 | ||
Consist of: - see Revision 3 | ||||||
Revision 2 for compressor nos. after 98379 incl. | ||||||
Spare parts kit: | 1 | 1 | 1 | 3126-178 | ||
10E-2 | Consist of: Slide ring, steel | 1 | 1 | 1 | ||
10F-1 | Slide ring, carbon | 1 | 1 | 1 | ||
10D-1 | O-ring dia. 75,79 x 3,53 | 1 | 1 | 1 | ||
10G-2 | Sealing ring | 1 | 1 | 1 | ||
10J-1 | Hex. socket screw M5 x 16 | 4 | 4 | 4 | ||
13 | Allen key - NV 4 x 90 x 90 | 1 | 1 | 1 | ||
8B-1 | Gasket for cover | 1 | 1 | 1 | ||
Mounting instruction | 0171-934 | |||||
Revision 3 | ||||||
Spare parts kit: | 1 | 1 | 1 | 3184-225 | ||
10E-1 | Consist of: Slide ring, steel | 1 | 1 | 1 | ||
10F-1 | Slide ring, carbon | 1 | 1 | 1 | ||
10D-1 | O-ring dia. 75,79 x 3,53 | 1 | 1 | 1 | ||
10G-1 | O-ring dia. 82,14x3,53 | 1 | 1 | 1 | ||
10J-1 | Hex. socket screw M5 x 16 | 4 | 4 | 4 | ||
13 | Alien key - NV 4 x 90 x 90 | 1 | 1 | 1 | ||
8B-1 | Gasket for cover | 1 | 1 | 1 | ||
Mounting instruction | 0171-930 | |||||
Shaft seal complete: SMC/TSMC 100 | 1 | 1 | 1 | 3184-226 | ||
Consist of: | ||||||
8A-2 | Cover (SMC/TSMC 100) | 1 | 1 | 1 | 3113-175 | |
8B-1 | Gasket for cover | 1 | 1 | 1 | 2353-005 | |
8C-1 | Hex. head screw M10 x 40 - DIN 933 | 6 | 6 | 6 | 1424-194 | |
Allen key - NV 4 x 90 x 90 | 1 | 1 | 1 | 1612-392 | ||
8D-1 | Hose connection 1/4" | 1 | 1 | 1 | 1345-143 | |
8E-1 | PVC hose 3/16" x 400 | 1241-190 | ||||
8F-1 | Spirolox ring dia. 76 | 1 | 1 | 1 | 1437-295 | |
8G-1 | Lock spring | 1 | 1 | 1 | 3126-169 | |
8H-1 | Groover pin dia. 4 x 20 | 1 | 1 | 1 | 1446-081 | |
10A-1 | Retaining flange | 1 | 1 | 1 | 3126-166 | |
10B-1 | Spring | 10 | 10 | 10 | 2142-058 | |
10D-1 | O-ring dia. 75,79 x 3,53 | 1 | 1 | 1 | 1331-075 | |
10E-2 | Slide ring, steel | 1 | 1 | 1 | 3126-167 | |
10F-1 | Slide ring, carbon | 1 | 1 | 1 | 3126-168 | |
10G-1 | O-ring dia. 82,14 x 3,53 | 1 | 1 | 1 | 1331-077 | |
10H-1 | Locking ring | 1 | 1 | 1 | 3126-153 | |
10J-1 | Hex. socket screw M5 x 16 | 4 | 4 | 4 | 1413-329 | |
Oil pump | ||||||
11-1 | Oil pump complete | 2.400 | 1 | 1 | 1 | 3141-004 |
Contains: | ||||||
-Oil pump | ||||||
11J-Lock nut, M10x 10,7 | ||||||
11L - Washer for M10 dia. 21/10,5 x 2 | ||||||
11N-Key 5 x 5 x 12 | ||||||
11P-Gasket dia. 32/27x1,5 | ||||||
11S - Threaded nipple | ||||||
11G-1 | Gear whell for pump pinion | 0.660 | 1 | 1 | 1 | 3141-046 |
11H-1 | Gear wheel for crank shaft | 0.530 | 1 | 1 | 1 | 3141-047 |
11M-1 | Hexagon head screw M6 x 25 | 0.010 | 4 | 4 | 4 | 1424-153 |
11Q-1 | Hexagon head screw M12 x 30 | 0.040 | 2 | 2 | 2 | 1424-215 |
11R-1 | Spring washer dia. 12 | 0.002 | 2 | 2 | 2 | 1437-081 |
11T-1 | Spring washer- dia. 11,1/6,1 x 1.6 | 0.005 | 4 | 4 | 4 | 1437-022 |
Unloading cylinder | ||||||
12-1 | Unloading cylinder Complete L=75, S=21,5 | 1.765 | 1 | 1 | 1 | 3135-149 |
12-2 | Unloading cylinder Complete L=100, S=46,5 | 1.790 | 1 | 1 | 1 | 3135-150 |
12-3 | Unloading cylinder Complete L=125, 8=71,5 | 1.815 | 1 | 1 | 3135-151 | |
12-4 | Unloading cylinder Complete L=150, S=96,5 | 1.840 | 1 | 3135-152 | ||
12-5 | Unloading cylinder (HP) Complete L=82, S=24,5 | 1.800 | 3135-161 | |||
12A-1 | Unloading cylinder (SMC and TSMC LP) | 1.700 | 2 | 3 | 4 | 3135-147 |
12A-2 | Unloading cylinder (TSMC HP) | 1.800 | 3135-148 | |||
12B-1 | Piston | 0.220 | 2 | 3 | 4 | 3135-034 |
12C-1 | Piston rod 75 mm (SMC only) | 0.065 | 1 | 1 | 1 | 3135-041 |
12C-2 | Piston rod 100 mm | 0.090 | 1 | 1 | 1 | 3135-042 |
12C-3 | Piston rod 125 mm | 0.115 | 1 | 1 | 3135-043 | |
12C-4 | Piston rod 150 mm | 0.140 | 1 | 3135-044 | ||
12C-5 | Piston rod 82 mm, grounded (TSMC HP only) | 0.090 | 3135-140 | |||
12D-1 | Threaded plug - 3/8" BSP | 0.065 | 2 | 3 | 4 | 2314-025 |
12E-1 | Gasket - dia. 25/17x1,5 | 0.002 | 2 | 3 | 4 | 2356-130 |
12F-1 | Seeger ring dia. 52 (SMCandTSMCLP) | 0.008 | 2 | 3 | 4 | 1437-155 |
12G-1 | Spring guide | 0.040 | 2 | 3 | 4 | 2145-004 |
12H-1 | Spring retainer (SMC and TSMC LP) | 0.110 | 2 | 3 | 4 | 3135-057 |
12J-1 | Spring (outer) | 0.065 | 2 | 2 | 4 | 2142-056 |
12J-2 | Spring (inner) | 0.035 | 2 | 3 | 4 | 2142-055 |
12K-1 | Benzing ring - dia. 9 mm | 0.002 | 2 | 3 | 4 | 1437-105 |
12K-2 | Benzing ring - dia. 7 mm (SMCandTSMCLP) | 0.001 | 2 | 3 | 4 | 1437-103 |
12L-1 | Hexagon head screw M10 x 30 | 0.030 | 8 | 12 | 16 | 1424-192 |
12M-1 | Cover (TSMC HP only) | 0.800 | 1 | 3135-105 | ||
12N-1 | Gasket for cover (TSMC HP only) | 0.010 | 1 | 2353-025 | ||
12P-1 | Look nut - UNF 3/8" (TSMC HP only) | 0.010 | 1 | 1433-100 | ||
12Q-1 | Socket cap screw M4 x 16 (TSMC HP only) | 0.010 | 6 | 1413-007 | ||
12R-1 | O-ring PRP 112 12,37x2.62 (TSMC HP only)*) | 0.001 | 1 | 1331-013 | ||
12S-1 | Gasket 100 x 100 x 2 | 0.010 | 8 | 8 | 8 | 2354-023 |
Frame for unloading mechanism | ||||||
Frame complete incl. pos. 13E-1 | 3184-216 | |||||
13A-1 | Suspension rod | 0.290 | 6 | 8 | 8 | |
13B-1 | Suspension rod | 0.290 | 6 | 8 | 8 | |
13C-1 | Cross piece | 0.330 | 6 | 8 | 8 | |
13D-1 | Cross piece | 0.330 | 6 | 8 | 8 | |
13E-1 | Countersunk screw M6 x 16 | 0.020 | 24 | 32 | 32 | 1413-092 |
Bracket for unloading mechanism | ||||||
14A-1 | Bracket with pin | 0.065 | 12 | 16 | 14 | 3135-060 |
14B-1 | Spacing ring | 0.005 | 24 | 32 | 28 | 2124-003 |
14C-1 | Hexagon head screw M6 x 30 | 0.010 | 24 | 32 | 28 | 1424-154 |
14D-1 | Spring washer - dia. 6 | 0.005 | 24 | 32 | 28 | 1437-022 |
Rocker for unloading mechanism | ||||||
15A-1 | Rocker | 0.050 | 24 | 32 | 32 | 3135-096 |
15B-1 | Bearing for SMC and TSMC LP | 0.006 | 24 | 32 | 24 | 3135-099 |
15B-2 | Bearing for TSMC HP | 0.006 | 8 | 3135-101 | ||
15C-1 | Spring retainer | 0.001 | 24 | 32 | 32 | 2145-001 |
15D-1 | Spring | 0.007 | 24 | 32 | 32 | 2142-061 |
15E-1 | Washer for bearing cup - 0,5 mm | 0.001 | 2114-003 | |||
Crankshaft - all without certificate | ||||||
16A-7 | Crankshaft for SMC 112S, complete | 88.800 | 1 | 3121-022 | ||
16A-8 | Crankshaft for SMC 116S and TSMC 116S, complete | 91.400 | 1 | 1 | 3121-023 | |
16A-9 | Crankshaft for SMC 112L, complete | 92.000 | 1 | 3121-107 | ||
16A-10 | Crankshaft for SMC 116L and TSMC 116L, complete | 100.400 | 1 | 1 | 3121-108 | |
16A-14 | Crankshaft for SMC 112E, complete | 1 | 3121-216 | |||
16A-15 | Crankshaft for SMC 116E and TSMC 116E, complete | 1 | 1 | 3121-217 | ||
16B-1 | Plain washer with pin | 0.800 | 1 | 1 | 1 | 2125-084 |
16C-1 | Key-18 x 11x 55 | 0.080 | 1 | 1 | 1 | 2123-005 |
16D-1 | Hexagon head screw M16 x 55 | 0.050 | 1 | 1 | 1 | 1424-104 |
16E-1 | Spring washer - dia. 16 | 0.004 | 1 | 1 | 1 | 1437-027 |
16F-1 | Plug M 12 S-type | 0.010 | 4 | 4 | 4 | 1413-260 |
16F-2 | Plug 1/4"L-type | 0.010 | 4 | 5 | 5 | 1343-141 |
Connecting rod | ||||||
17-1 | Connecting rod, complete SMC and TSMC LP | 2.300 | 12 | 16 | 12 | 3123-004 |
17-2 | Connecting rod. completeTSMC HP | 2.700 | 4 | 3123-006 | ||
17A-1 | Half-section of bearing | 0.080 | 24 | 32 | 32 | 2133-003 |
17A-2 | Half-section of bearing (0,5 mm undersize) | 0.080 | 24 | 32 | 32 | 2133-004 |
17B-1 | Bushing for piston pin SMC and TSMC LP | 0.200 | 12 | 16 | 12 | 2132-004 |
17B-2 | Needle bearing TSMC HP | 0.200 | 4 | 1511-275 | ||
17C-1 | Bolt for connecting rod | 0.055 | 24 | 32 | 32 | 2111-068 |
17D-1 | Lock nut - 3/8" UNF | 0.010 | 24 | 32 | 32 | 1433-116 |
Piston with pin and rings | ||||||
18-1 | Piston with pin and rings S | 1.320 | 12 | 16 | 16 | 3124-002 |
18-2 | Piston with pin and rings L | 1.320 | 12 | 16 | 16 | 3124-052 |
18-3 | Piston with pin and rings E | 1.320 | 12 | 16 | 16 | 3124-065 |
18A-1 | Piston pin | 0.500 | 12 | 16 | 16 | 3125-084 |
18B-1 | Piston ring | 0.025 | 24 | 32 | 32 | 3125-130 |
18C-1 | Oil scraper rings | 0.030 | 12 | 16 | 16 | 3125-065 |
18D-1 | Seeger-ring - dia. 40 (inside diameter) | 0.005 | 24 | 32 | 32 | 1437-150 |
Cylinder liner with sction valve | ||||||
19-1 | Cylinder liner with suction valve R717, SMC - TSMC LP, S and L | 4.100 | 12 | 16 | 12 | 3112-085 |
19-5 | Cylinder liner with suction valve R717, SMC- TSMC LP, E | 4.500 | 12 | 16 | 12 | 3112-081 |
19-2 | Cylinder liner with suction valve HFC/HCFC, SMC - TSMC LP, S and L | 4.100 | 12 | 16 | 12 | 3112-086 |
19-3 | Cylinder liner with suction valve R717. SMC - TSMC HP, S and L | 4.100 | 4 | 3112-087 | ||
19-6 | Cylinder liner with suction valve R717, SMC-TSMC HP, E | 4.500 | 4 | 3112-097 | ||
19-4 | Cylinder liner with suction valve HFC/HCFC, TSMC HP, S and L | 4.100 | 4 | 3112-088 | ||
19A-1 | Cylinder liner S and L | 3.500 | 12 | 16 | 16 | 3112-065 |
19A-2 | Cylinder liner, E | 4.000 | 12 | 16 | 16 | 3112-080 |
19B-1 | Unloading rings with pins, S and L | 0.400 | 12 | 16 | 16 | 3135-054 |
19B-2 | Unloading rings with pins, E | 0.500 | 12 | 16 | 16 | 3135-173 |
19C-1 | Washer-dia. 8/4,3x0.5 | 0.001 | 72 | 96 | 96 | 2114-001 |
19D-1 | Spring for unloading ring | 0.001 | 72 | 96 | 96 | 2142-034 |
19E-1 | Tension spring - 342 mm | 0.015 | 12 | 16 | 16 | 2142-048 |
19F-1 | Ring plate for suction valve | 0.035 | 12 | 16 | 16 | 3131-021 |
19G-1 | Valve spring | 0.001 | 72 | 96 | 96 | 2141-047 |
19H-1 | Suction valve retaining plate R717 | 1.400 | 12 | 16 | 16 | 3132-083 |
19H-2 | Suction valve retaining plate R12/R22 | 1.400 | 12 | 16 | 16 | 3132-084 |
19J-1 | Guide ring for discharge valve | 0.450 | 12 | 16 | 16 | 3134-008 |
19K-1 | Gasket for cylinder liner - 0,5 mm | 0-005 | 12 | 16 | 16 | 2356-111 |
19K-2 | Gasket for cylinder liner - 0,8 mm | 0.006 | 12 | 16 | 16 | 2356-233 |
19M-1 | O-ring 107,55 x 3,53*) TSMC HP | 0.002 | 4 | 1331-085 | ||
19N-1 | Socket cap screw M6 x 30 | 0.010 | 72 | 96 | 96 | 1413-343 |
19T-1 | Gasket - dia. 163/141 x 0,2 mm | 0.001 | 12 | 16 | 13 | 2353-140 |
Discharge valve**) | ||||||
20-1 | Disharge valve - R717 - HP | 1.200 | 12 | 16 | 4 | 3136-089 |
20-2 | Disharge valve - R717 - LP | 1.200 | 12 | 16 | 12 | 3136-087 |
20-3 | Disharge valve - HFC/HCFC - HP | 1.200 | 12 | 16 | 4 | 3136-088 |
20-4 | Disharge valve - HFC/HCFC - LP | 1.200 | 12 | 16 | 12 | 3136-086 |
20-5 | Disharge valve - HFC/HCFC - VHP | 1.200 | 12 | 16 | 3136-085 | |
20A-1 | Disharge valve seat | 0.250 | 12 | 16 | 16 | 3133-027 |
20B-1 | Retaining plate - R717 - HP | 1.000 | 12 | 16 | 4 | 3132-092 |
20B-2 | Retaining plate - R717 - LP | 1.000 | 16 | 12 | 3132-090 | |
20B-3 | Retaining plate - HFC/HCFC - HP | 1.000 | 12 | 16 | 4 | 3132-093 |
20B-4 | Retaining plate - HFC/HCFC - LP | 1.000 | 12 | 16 | 12 | 3132-091 |
20B-5 | Retaining plateHFC/HCFC - VHP | 1.000 | 12 | 16 | 3132-094 | |
20C-1 | Ring plate | 0.030 | 12 | 16 | 16 | 3131-015 |
20D-1 | Special screw M12 x 60 | 0.055 | 12 | 16 | 16 | 1413-121 |
20E-1 | Nut M12 x 1,25 | 0.015 | 24 | 32 | 32 | 1432-075 |
20F-1 | Spring guide | 0.015 | 12 | 16 | 16 | 2145-008 |
20G-1 | Valve spring - R717-HP | 0.001 | 96 | 128 | 32 | 2141-047 |
20G-1 | Valve spring - R717 - LP | 0.001 | 72 | 96 | 72 | 2141-047 |
20G-1 | Valve spring - HFC/HCFC - HP | 0.001 | 144 | 192 | 48 | 2141-047 |
20G-1 | Valve spring - HFC/HCFC - LP | 0.001 | 72 | 96 | 72 | 2141-047 |
20G-1 | Valve spring - HFC/HCFC - VHP | 0.001 | 192 | 256 | 2141-047 | |
**) Compressors are fitted with disharge valves depending on the working conditions. | ||||||
The valve is selected on the bisis of the refrigerant and the condensing/intermediate | ||||||
pressure temperature of the plant, indicated in the table in °C. | ||||||
For inst. R22 at TC=53°C=>VHP disharge valve. | ||||||
Refri-gerant | Conditions | Valve type | ||||
R717 | TC < 15°C | LP | ||||
TC > 15°C | HP | |||||
HFC/ HCFC | TC < 15°C | LP | ||||
45°C R404A-R507 15°C ≤ TC< 50°CR22 70°CR134a | HP | |||||
45°C R404A-R507 TC≥ TC< 50°CR22 70°CR134a | VHP | |||||
Pos- | Designation | Weight each in kg | Number each compressor | Part No | ||
SMC 112 | SMC 116 | TSMC 116 | ||||
Spring for safety head | ||||||
21-1 | Spring | 0.400 | 12 | 16 | 16 | 2142-060 |
Oil pressure valve | ||||||
22A-1 | Oil pressure valve, complete | 0.450 | 1 | 1 | 1 | 3142-150 |
22B-1 | Gasket 90 x 44 x 1 | 0.001 | 1 | 1 | 1 | 2354-075 |
22C-1 | Hexagon head screw M12 x 35 | 0.040 | 2 | 2 | 2 | 1424-216 |
Oil charging valve | ||||||
23A-1 | Oil charging valve, complete | 0.300 | 1 | 1 | 1 | 2412-585 |
23B-1 | Threaded reducing nipple | 0.155 | 1 | 1 | 1 | 2311-059 |
23C-1 | Socket | 0.075 | 1 | 1 | 1 | 2313-035 |
23D-1 | Gasket | 0.001 | 1 | 1 | 1 | 2356-123 |
23E-1 | Gasket | 0.001 | 1 | 1 | 1 | 2356-140 |
23F-1 | Gasket | 0.001 | 1 | 1 | 1 | 2356-283 |
23G-1 | Nut | 0.060 | 1 | 1 | 1 | 2313-027 |
By-pass valves | ||||||
24-1 | By-pass valve dia. 28 12 bar | 3.600 | 2 | 3137-018 | ||
24-2 | By-pass valve dia. 28 22 bar | 3.600 | 2 | 2 | 1 | 3137-007 |
24-3 | By-pass valve dia. 28 24 bar | 3.600 | 2 | 2 | 1 | 3137-009 |
24B-1 | O-ring for cylinder *) | 0.002 | 2 | 2 | 3 | 1331-067 |
24C-1 | O-ring for cover *) | 0.002 | 8 | 8 | 3 | 1331-071 |
24D-1 | Hexagon head screw M8 x 25 | 0.015 | 8 | 1424-168 | ||
24D-2 | Hexagon head screw M8 x 50 | 0.025 | 8 | 8 | 4 | 1424-173 |
24E-1 | Spring washer dia. 14,2/8,2 x 2 | 0.002 | 12 | 1437-023 | ||
24F-2 | Intermediate piece | 1 | 2469-002 |
Pos. | Designation | Weight each in kg | Valve dim. | Number each comprassor | Part no. | ||
SMC 112 | SMC 116 | SMC 116 | |||||
Stop valves | |||||||
25-3 | Complete valve, disharge HP | 65 | 1 | 2414-069 | |||
25-4 | Complete valve, inlet HP | 80 | 1 | 2411-263 | |||
25-5 | Complete valve, disharge LP | 100 | 1 | 1 | 1 | 2414-070 | |
25-6 | Complete valve, inlet LP | 125 | 1 | 1 | 1 | 2414-048 | |
25A-3 | Valve housing | 65 | 1 | 2432-159 | |||
25A-4 | Valve housing | 3.200 | 80 | 1 | 2432-143 | ||
25A-5 | Valve housing | 100 | 1 | 1 | 1 | 2432-160 | |
25A-6 | Valve housing | 125 | 1 | 1 | 1 | 2432-110 | |
25B-3 | Valve bonnet | 1.740 | 65 | 1 | 2433-028 | ||
25B-4 | Valve bonnet | 3.200 | 80 | 1 | 2433-029 | ||
25B-5 | Valve bonnet | 4.500 | 100 | 1 | 1 | 1 | 2433-030 |
25B-6 | Valve bonnet | 8.700 | 125 | 1 | 1 | 1 | 2433-008 |
25C-3 | Front part for cone | 0.095 | 65 | 1 | 1 | 2444-090 | |
25C-4 | Front part for cone | 0.028 | 80 | 1 | 1 | 2444-092 | |
25C-5 | Front part for cone | 0.520 | 100 | 1 | 1 | 1 | 2444-094 |
25C-6 | Front part for cone | 0.520 | 125 | 1 | 1 | 1 | 2444-005 |
25D-3 | Rear part for cone | 0.185 | 65 | 1 | 1 | 2444-091 | |
25D-4 | Rear part for cone | 0.440 | 80 | 1 | 1 | 2444-093 | |
25D-5 | Rear part for cone | 1.000 | 100 | 1 | 1 | 1 | 2444-095 |
25D-6 | Rear part for cone | 1.650 | 125 | 1 | 1 | 1 | 2444-013 |
25E-3 | Screw for valve cone | 0.020 | 65 | 1 | 2444-017 | ||
25E-4 | Screw for valve cone | 0.120 | 80 | 1 | 2444-018 | ||
25E-5 | Screw for valve cone | 0.120 | 100 | 1 | 1 | 1 | 2444-018 |
25E-6 | Screw for valve cone | 0.120 | 125 | 1 | 1 | 1 | 2444-018 |
25F-3 | Gasket for screw dia. 31/24 x 1,5 | 0.001 | 65 | 1 | 2356-138 | ||
25F-4 | Gasket for screw dia. 34/27 x 1,5 | 0.001 | 80 | 1 | 2356-141 | ||
25F-5 | Gasket for screw dia. 34/27 x 1,5 | 0.001 | 100 | 1 | 1 | 1 | 2356-141 |
25F-6 | Gasket for screw dia. 34/27 x 1,5 | 0.001 | 125 | 1 | 1 | 1 | 2356-141 |
25G-3 | Threaded connection | 0.180 | 65 | 1 | 2445-053 | ||
25G-4 | Threaded connection | 0.340 | 80 | 1 | 2445-060 | ||
25G-5 | Threaded connection | 0.400 | 100 | 1 | 1 | 1 | 2445-061 |
25G-6 | Threaded connection | 0.650 | 125 | 1 | 1 | 1 | 2445-009 |
25H-3 | Sealing ring dia. 62/45 x 3 | 0.004 | 65 | 1 | 2354-003 | ||
25H-4 | Sealing ring dia. 85/66 x 3 | 0.015 | 80 | 1 | 2354-115 | ||
25H-5 | Sealing ring dia. 110/91 x 3 | 0.020 | 100 | 1 | 1 | 1 | 2354-117 |
25H-6 | Sealing ring dia. 133/110 x 3 | 0.030 | 125 | 1 | 1 | 1 | 2354-118 |
25J-3 | Gasket for bonnet dia. 72,39 x 5,33 | 0.010 | 65 | 1 | 1331-154 | ||
25J-4 | Gasket for bonnet dia. 94,62 x 5,33 | 0.015 | 80 | 1 | 1331-161 | ||
25J-5 | Gasket for bonnet dia. 116,84 x 7 | 0.020 | 100 | 1 | 1 | 1 | 1331-198 |
25J-6 | Gasket for bonnet dia. 167,5/148 x 2 | 0.003 | 125 | 1 | 1 | 1 | 1331-112 |
25K-3 | Spindle | 0.250 | 65 | 1 | 2442-023 | ||
25K-4 | Spindle | 0.420 | 80 | 1 | 2442-030 | ||
25K-5 | Spindle | 0.480 | 100 | 1 | 1 | 1 | 2442-028 |
25K-6 | Spindle | 0.700 | 125 | 1 | 1 | 1 | 2442-025 |
25L-3 | Lock washer for spindle | 0.010 | 65 | 1 | 2445-019 | ||
25L-4 | Lock washer for spindle | 0.015 | 80 | 1 | 2445-020 | ||
25L-5 | Lock washer for spindle | 0.015 | 100 | 1 | 1 | 1 | 2445-020 |
25L-6 | Lock washer for spindle | 0.015 | 125 | 1 | 1 | 1 | 2445-020 |
25M-3 | Packing gland Compl. with o-rings | 0.120 | 65 | 1 | 2452-073 | ||
25M-4 | Packing gland Compl. with o-rings | 0.250 | 80 | 1 | 2452-004 | ||
25M-5 | Packing gland Compl. with o-rings | 0.250 | 100 | 1 | 1 | 1 | 2452-004 |
25M-6 | Packing gland Compl. with o-rings | 0.250 | 125 | 1 | 1 | 1 | 2452-004 |
25N-3 | Guide pin | 0.002 | 65 | 1 | 1445-085 | ||
25N-4 | Guide pin | 0.002 | 80 | 1 | 1445-085 | ||
25N-5 | Guide pin | 0.002 | 100 | 1 | 1 | 1 | 1445-085 |
25N-6 | Guide screw | 0.006 | 125 | 1 | 1 | 1 | 2111-035 |
25P-3 | O-ring dia. 21,8x3,5*) | 0.002 | 65 | 1 | 1331-020 | ||
25P-4 | O-ring dia. 28,2 x 3,5*) | 0.002 | 80 | 1 | 1331-024 | ||
25P-4 | O-ring dia. 28,2 x 3,5*) | 0.002 | 100 | 1 | 1 | 1 | 1331-024 |
25P-6 | O-ring dia. 28,2 x 3,5*) | 0.002 | 125 | 1 | 1 | 1 | 1331-024 |
25Q-3 | Nylon washer dia. 39,5/28 x 1,5 | 0.001 | 65 | 1 | 2354-018 | ||
25Q-4 | Nylon washer dia. 34/22 x 1,5 | 0.002 | 80 | 1 | 2354-017 | ||
25Q-5 | Nylon washer dia. 34/22 x 1,5 | 0.002 | 100 | 1 | 1 | 1 | 2354-017 |
25Q-6 | Nylon washer dia, 34/22 x 1,5 | 0.002 | 125 | 1 | 1 | 1 | 2354-017 |
25R-3 | O-ring dia. 17,12x2,62*) | 0.001 | 65 | 2 | 2 | 1331-016 | |
25R-4 | O-ring dia. 21,8x3,5 | 0.002 | 80 | 2 | 2 | 1331-020 | |
25R-5 | O-ring dia. 21,8x3,5 | 0.002 | 100 | 2 | 2 | 2 | 1331-020 |
25R-6 | O-ring dia. 21,8x3,5 | 0.002 | 125 | 2 | 2 | 2 | 1331-020 |
25S-3 | Hand wheel dia. 120 | 0.160 | 65 | 1 | 1365-036 | ||
25S-4 | Hand wheel dia. 140 | 0.400 | 80 | 1 | 1365-033 | ||
25S-5 | Hand wheel dia. 180 | 0.800 | 100 | 1 | 1 | 1 | 1365-035 |
25S-6 | Hand wheel dia. 180 | 0.800 | 125 | 1 | 1 | 1 | 1365-035 |
25T-3 | Screw for hand wheel M5 x 10 | 0.002 | 65 | 1 | 1424-140 | ||
25T-4 | Screw for hand wheel M8 x 16 | 0.010 | 80 | 1 | 1424-166 | ||
25T-5 | Screw for hand wheel M8 x 16 | 0.010 | 100 | 1 | 1 | 1 | 1424-166 |
25T-6 | Screw for hand wheel M8 x 16 | 0.010 | 125 | 1 | 1 | 1 | 1424-166 |
25U-3 | Washer for hand wheel | 0.001 | 65 | 1 | 1436-024 | ||
25U-4 | Washer for hand wheel | 0.003 | 80 | 1 | 1436-026 | ||
25U-5 | Washer for hand wheel | 0.003 | 100 | 1 | 1 | 1 | 1436-026 |
25U-6 | Washer for hand wheel | 0.003 | 125 | 1 | 1 | 1 | 1436-026 |
25V-6 | Spring washer dia. 14,2/8,2 x 2 | 0.002 | 125 | 1 | 1437-023 | ||
25Y-3 | Gasket for welding nipple dia. 90/68 x 2 | 0.015 | 65 | 1 | 2356-087 | ||
25Y-4 | Gasket for welding nipple dia. 130/95x2 | 0.025 | 100 | 1 | 1 | 1 | 2356-104 |
25Y-6 | Gasket for welding nipple dia. 155/125x2 | 0.025 | 125 | 1 | 1 | 1 | 2356-109 |
25Z-3 | Screw valve/compr. M14 x 45 | 0.050 | 65 | 4 | 1424-242 | ||
25Z-4 | Screw valve/compr. M16 x 45 | 0.095 | 100 | 4 | 4 | 4 | 1424-102 |
25Z-6 | Screw valve/compr. M16 x 100 | 0.170 | 125 | 6 | 6 | 6 | 1424-268 |
25AC-3 | Counter flange | 65 | 1 | 2344-019 | |||
25AC-4 | Counter flange | 100 | 1 | 1 | 1 | 2344-020 | |
25AC-6 | Counter flange | 3.600 | 125 | 1 | 1 | 1 | 2344-006 |
25AD-3 | Welding nipple dia. 65 | 65 | 1 | 2322-103 | |||
25AD-4 | Welding nipple dia. 100 | 100 | 1 | 1 | 1 | 2322-108 | |
25AD-6 | Welding nipple dia. 125 | 125 | 1 | 1 | 1 | 2322-110 | |
25AF-3 | Threaded plug 3/4" BSP | 65 | 1 | 2314-065 | |||
25AF-4 | Threaded plug 3/4" BSP | 100 | 1 | 1 | 1 | 2314-065 | |
25AG-3 | Gasket for valve/compr. | 0.016 | 65 | 1 | 2354-105 | ||
25AG-4 | Gasket for valve/compr. | 0.020 | 100 | 1 | 1 | 1 | 2354-106 |
25AG-6 | Gasket for valve/compr. | 0.040 | 125 | 1 | 1 | 1 | 2354-080 |
25AH-3 | Gasket for plug | 0.002 | 65 | 1 | 2356-139 | ||
25AH-4 | Gasket for plug | 0.002 | 100 | 1 | 1 | 1 | 2356-139 |
25AJ-3 | Screw bonnet/valve M10 x 25 | 65 | 8 | 1424-191 | |||
25AJ-4 | Screw bonnet/valve M10 x 25 | 80 | 8 | 1424-191 | |||
25AJ-5 | Screw bonnet/valve M20 x 30 | 0.040 | 100 | 8 | 8 | 8 | 1424-215 |
25AJ-6 | Screw bonnet/valve M16 x 60 | 0.100 | 125 | 6 | 6 | 6 | 1424-260 |
25AK-3 | Screw for counter flange M10 x 40 | 0.030 | 65 | 6 | 1424-194 | ||
25AK-4 | Screw for counter flange M12 x 50 | 0.050 | 100 | 6 | 1424-219 | ||
25AK-4 | Screw for counter flange M16 x 65 | 0.100 | 125 | 6 | 6 | 6 | 1424-106 |
Pos. | Designation | Weight each in kg | Number each compressor | Part No | ||
SMC 112 | SMC 116 | TSMC 116 | ||||
Pressure gauges Suction and pressure gauge | ||||||
30A-1 | R717 | 1.640 | 1 | 1 | 1 | 1541-108 |
30A-2 | R12,R22 and R502 | 1.620 | 1 | 1 | 1 | 1541-232 |
30A-3 | R22,R134a and R404A | 1.620 | 1 | 1 | 1 | 1541-074 |
30B-1 | Nozzle and gasket dia. 14/0,8 x 1,5 | 0.001 | 1 | 1 | 1 | 3146-013 |
30C-1 | Gasket dia. 11/4x1,5 | 0.001 | 1 | 1 | 1 | 2356-119 |
SMC: discharge pressure gauge | ||||||
31A-1 | R717 | 1.380 | 1 | 1 | 1 | 1541-029 |
31A-2 | R12,R22 and R502 | 1.400 | 1 | 1 | 1 | 1541-160 |
31A-3 | R22,R134a and R404A | 1.400 | 1 | 1 | 1 | 1541-075 |
31B-1 | Nozzle and gasket dia. 14/0,8 x 1,5 | 0.001 | 1 | 1 | 1 | 3146-013 |
TSMC: disharge pressure gauge | ||||||
31A-3 | R717 | 1.600 | 1 | 1541-101 | ||
31A-4 | R12,R22 and R502 | 1.660 | 1 | 1541-161 | ||
31A-5 | R22,R134a and R404A | 1.660 | 1 | 1541-076 | ||
31B-1 | Nozzle and gasket dia. 14/0,8 x 1,5 | 0.001 | 2 | 3146-013 | ||
31C-1 | Screws for gauges M4 x 20 | 6 | 6 | 6 | 1412-350 | |
Oil filter | ||||||
33-1 | Oil filter complete | 1 | 1 | 1 | 4524-039 | |
33A-1 | Filter element | 1 | 1 | 1 | 1517-125 | |
33B-1 | Gasket | 2 | 2 | 2 | 2356-202 | |
33C-1 | End cover | 1 | 1 | 1 | 3422-150 | |
33D-1 | Rod for filter | 1 | 1 | 1 | 2112-145 | |
33E-1 | Shield for oil filter | 1 | 1 | 1 | 2158-209 | |
33F-1 | Bracket with connection | 1 | 1 | 1 | 3422-152 | |
33G-1 | Distance piece | 1 | 1 | 1 | 2212-136 | |
33H-1 | Rubber gasket | 1 | 1 | 1 | 1334-012 | |
33J-1 | Magnet | 3 | 3 | 3 | 1517-022 | |
33K-1 | Iron ring | 3 | 3 | 3 | 2114-038 | |
33L-1 | Washer dia. 17/8,4 | 1 | 1 | 1 | 1436-034 | |
33M-1 | NutM8 | 1 | 1 | 1 | 1433-073 | |
33N-1 | Washer dia. 24/13 | 1 | 1 | 1 | 1436-036 | |
330-1 | Nut M12 | 1 | 1 | 1 | 1433-075 | |
33P-1 | O-ring *) | 1 | 1 | 1 | 1331-009 | |
33Q-1 | O-ring *) | 1 | 1 | 1 | 1331-008 | |
33R-1 | Cutting ring joint | 1 | 1 | 1 | 1349-131 | |
Suction filter | ||||||
34A-1 | Suction filter open, complete | 0.660 | 2 | 2 | 1 | 3425-093 |
34A-2 | Suction filter closed, complete | 0.870 | 1 | 3425-095 | ||
34B-1 | Filter bag | 0.035 | 2 | 2 | 2 | 3425-096 |
34C-1 | Inset for filter bag | 0.040 | 2 | 2 | 2 | 3424-061 |
34D-1 | O-ring PRP 346 -104,1 x 5,33 *) | 0.012 | 2 | 2 | 3 | 1331-164 |
34E-1 | Coverfor suction filter | 4.160 | 2 | 2 | 1 | 3422-114 |
34F-1 | O-ring PRP 248 -120,24 x 3,53 *) | 0.006 | 2 | 2 | 1 | 1331-089 |
34G-1 | Hexagon head screw M 16 x 45 | 0.095 | 8 | 8 | 4 | 1424-102 |
34H-1 | Spring washer dia. 26,2/16,2 x 3,5 | 0.004 | 8 | 8 | 4 | 1437-027 |
Discharge pipe for oil filter | ||||||
38A-1 | Discharge pipe for oil pump | 0.500 | 1 | 1 | 1 | 3141-110 |
38B-1 | Inside pipe connection to control system (compr. without oil cooler) | 0.090 | 1 | 1 | 1 | 3141-162 |
38B-2 | Inside pipe connection to control system (compr. with OSSI oil cooler R717) | 0.090 | 1 | 1 | 1 | 3141-163 |
28B-3 | inside pipe connection to control system (compr. with HE8 oil cooler HCFC) | 0.090 | 1 | 1 | 1 | 3141-164 |
38C-1 | Connection for disharge pipe -SMC112 | 0.120 | 1 | 2333-024 | ||
38C-3 | Connection for disharge pipe -SMC116 and TSMC116 | 0.180 | 1 | 1 | 2333-026 | |
38D-1 | O-ring PRP 212 - 21,80 x 3,53*) | 0.002 | 2 | 2 | 2 | 1331-020 |
38E-1 | O-ring PRP 321 - 29,51 x 5,33*) | 0.004 | 1 | 1 | 1 | 1331-039 |
38F-1 | Gasket dia. 27/21 x1,5 | 0.001 | 1 | 1 | 1 | 2356-133 |
38G-1 | O-ring dia. 26,58 x 3,5') | 0.002 | 1 | 1 | 1 | 1331-023 |
38H-1 | Discharge pipe for oil | 0.140 | 1 | 1 | 1 | 3141-114 |
38J-1 | Support for oil pipe | 0.130 | 1 | 1 | 1 | 2213-150 |
38K-1 | Hexagon head screw M10 x 16 | 0.012 | 2 | 2 | 2 | 1424-189 |
38L-1 | Spring washer dia. 17,2/10,2 x 2,2 | 0.002 | 2 | 2 | 2 | 1437-033 |
Analogous control and safety | ||||||
equipment | ||||||
39A-1 | Gauge panel | 0.070 | 1 | 1 | 1 | 3146-042 |
39B-1 | Socket cap screw M10 x 60 | 0.045 | 2 | 2 | 2 | 1413-382 |
39C-1 | Console | 1 | 1 | 1 | 2213-142 | |
39D-1 | Bar for controls (4 controls) | 1 | 1 | 1 | 2213-143 | |
39D-2 | Bar for controls (5 controls) | 1 | 1 | 1 | 2213-144 | |
39D-3 | Bar for controls (6 controls) | 1 | 1 | 1 | 2213-145 | |
39D-4 | Bar for controls (7 controls) | 1 | 1 | 1 | 2213-154 | |
39D-5 | Bar for controls (US, SMC) | 1 | 1 | 1 | 2213-368 | |
39D-6 | Bar for controls (US, TSMC) | 2213-369 | ||||
39E-1 | Hexagon head screw M6 x 12 | 2 | 2 | 2 | 1424-150 | |
39F-1 | Spring washer dia. 11/6 | 2 | 2 | 2 | 1437-022 | |
39G-1 | Socket cap screw M4 x 6 | 1412-200 | ||||
39H-1 | Spring washer dia. 7/4 | 1437-020 | ||||
39J-1 | Socket cap screw M5 x 10 | 4 | 4 | 4 | 1413-330 | |
39K-1 | Spring washer dia. 9/5 | 4 | 4 | 4 | 1437-021 | |
39L-1 | Console for gauge panel | 1 | 1 | 1 | 2213-149 | |
39M-1 | Nut M10 | 2 | 2 | 2 | 1432-064 | |
39N-1 | Spring washer | 2 | 2 | 2 | 1437-033 | |
Cooling water connection See section: Water cooling of reciprocating compressor | ||||||
40A-1 | Set of hoses for cooling water SMC112 | 2.700 | 1 | 3185-157 | ||
40A-2 | Set of hoses for cooling water SMC116 | 2.820 | 1 | 1 | 3185-158 | |
40B-1 | Hose connection - 3/8" - straight | 0.004 | 28 | 32 | 32 | 2334-025 |
40C-1 | Angle - 3/8" | 0.009 | 17 | 17 | 17 | 1341-090 |
40D-1 | T-piece | 0.015 | 4 | 4 | 4 | 1341-141 |
40E-1 | Hose clamp | 0.015 | 28 | 32 | 32 | 1345-168 |
40F-1 | Cable binder | 5 | 5 | 5 | 1554-062 | |
40G-1 | Nipple 3/4" - 3/8" | 0.070 | 2 | 2 | 2 | 2312-016 |
40H-1 | T-piece 3/4" - 3/4" - 3/8" | 0.150 | 2 | 2 | 2 | 1351-026 |
Purge valve | ||||||
42A-1 | Purge valve | 0.300 | 1 | 1 | 2 | 2412-585 |
42B-1 | Threaded nipple | 1 | 1 | 1 | 1349-078 | |
42C-1 | Cutting ring | 0.135 | 1 | 1 | 2 | 1349-062 |
42D-1 | Nut | |||||
42E-1 | Nut | 0.070 | 1 | 1 | 2 | 2313-045 |
42F-1 | Connection pipe with collar | 0.025 | 1 | 1 | 2 | 2334-027 |
42G-1 | Gasket | 0.001 | 2 | 2 | 4 | 2356-123 |
42H-1 | Nut | 0.060 | 1 | 1 | 2 | 2313-027 |
Pressure and temperature controls Pressure controls for R717 | ||||||
45A-1 | KP 5A | 0.300 | 1 | 1 | 1 | 1373-125 |
45B-1 | KP 15A | 0.760 | 1 | 1 | 1 | 1373-142 |
45C-1 | MP 55A | 1.100 | 1 | 1 | 1 | 1373-162 |
Pressure controls for R22, R134a and R404A | ||||||
45D-1 | KP 5 | 0.300 | 1 | 1 | 1 | 1373-123 |
45E-1 | KP 15 | 0.540 | 1 | 1 | 1 | 1373-135 |
45F-1 | MP 55 | 1.100 | 1 | 1 | 1 | 1373-159 |
Temperature controls: | ||||||
45G-1 | KP 98 | 0.720 | 1 | 1 | 1 | 1373-043 |
45H-1 | KP 77 | 0.350 | 1 | 1 | 1 | 1373-044 |
45J-1 | Phail pocket for temperature controls | 0.770 | 1 | 1 | 1 | 1377-171 |
45K-1 | Gasket | 1 | 1 | 1 | 2356-133 | |
AMR 350 S coupling | ||||||
48A-4 | Disc pack | 1.132 | 2 | 2 | 2 | 1524-158 |
48B-4 | Bolt | 0.054 | 16 | 16 | 16 | 1524-166 |
48C-4 | Bevel washer | 0.010 | 4 | 4 | 4 | 1524-188 |
48D-4 | Lock nut | 0.018 | 16 | 16 | 16 | 1524-174 |
48E-4 | Washer | 0.008 | 16 | 16 | 16 | 1524-182 |
Intermediate bearing | ||||||
49-1 | Intermediate bearing complete | 17.600 | 1 | 1 | 1 | 3113-146 |
49A-1 | Housing | 1 | 1 | 1 | ||
49B-1 | Socket cap screw M 12 x 45 DIN 912 | 0.052 | 4 | 4 | 4 | 1413-389 |
49C-1 | Spring washer dia. 12,2 x 20,2 | 0.002 | 4 | 4 | 4 | 1437-081 |
49D-1 | Guide pin dia. 5x26 | 0.002 | 2 | 2 | 2 | 1446-022 |
49E-1 | Half section of bearing | 0.080 | 8 | 8 | 8 | 2133-003 |
49E-2 | Half section of bearing for repair 0,5 mm undersize | 0.080 | 8 | 8 | 8 | 2133-004 |
49F-1 | Hexagon head screw M10 x 65 | 0.045 | 2 | 2 | 2 | 1424-199 |
49G-1 | Spring washer M10 | 0.002 | 2 | 2 | 2 | 1437-033 |
49H-1 | Threaded plug 3/4" BSP | 0.065 | 2 | 2 | 2 | 2314-027 |
49J-1 | Gasket dia. 34/27 x 1,5 | 0.001 | 2 | 2 | 2 | 2356-140 |
Capacity regulation | ||||||
50A-2 | Valve body with 2 solenoid valves without coils | 2.530 | 2 | 1 | 3143-384 | |
50A-3 | Vafve body with 3 solenoid valves without coils | 3.440 | 2 | 1 | 3143-385 | |
50A-4 | Valve body with 4 solenoid valves without coils | 3.480 | 2 | 3143-386 | ||
50B-1 | Coil 220/230V, 50/60 Hz, 10 W | 0.260 | 1372-537 | |||
50B-2 | Coil 110V, 50/60 Hz. 10W | 0.260 | 1372-538 | |||
50B-3 | Coil 240V, 50 Hz, 10W | 0.260 | 1372-539 | |||
50C | Solenoid valve | 1372-424 | ||||
(service kit for one solenoid valve) | ||||||
Crankcase heater | ||||||
57A-1 | Crankcase heater - 270 W -115 V, | 810 | 2 | 2 | 2 | 3181-034 |
1 1/4" BSP | ||||||
57A-2 | Crankcase heater - 270 W - 230 V, | 810 | 2 | 2 | 2 | 3181-035 |
1 1/4" BSP | ||||||
57A-3 | Crankcase heater - 270 W - 250 V, | 810 | 2 | 2 | 2 | 3181-036 |
1 1/4" BSP | ||||||
57B-1 | Sealing ring dia. 42/49 x 6,5 | 0,022 | 2 | 2 | 2 | 1349-213 |
80 | Solenoide valve blok, complete with 0,6 mm orifice for oil return, excl. coil | 2.040 | 1 | 1 | 1 | 1372-179 |
Strainer kit consist of: | 1 | 1 | 1 | 1372-089 | ||
80E | Strainer | |||||
80G | Al-gasket | |||||
Service kit consist of: | 1 | 1 | 1 | 1372-086 | ||
80P | Armature tube | |||||
80H | Armature | |||||
80K | O-ring | |||||
80M | O-ring | |||||
80L | Al-gasket | |||||
80N | Snap fastener | |||||
Seal kit consist of: | 1 | 1 | 1 | 1372-091 | ||
80G | Al-gasket | |||||
80K | O-ring | |||||
80M | O-ring | |||||
80L | Al-gasket | |||||
80Q | Al-gasket | |||||
Orifice kit 0,6 mm consist of: | 1 | 1 | 1 | 1371-034 | ||
80L | Al-gasket | |||||
80Q | Al-gasket | |||||
801 | Orifice 0,6 mm | |||||
Orifice kit 0,8 mm consist of: | 1 | 1 | 1 | 1371-035 | ||
80L | Al-gasket | |||||
80Q | Al-gasket | |||||
801 | Orifice 0,8 mm | |||||
Orifice kit 1,0 mm consist of: | 1 | 1 | 1 | 1371-036 | ||
80L | Al-gasket | |||||
80Q | At-gasket | |||||
801 | Orifice 1,0 mm | |||||
Orifice kit 3,3 mm (for thermopump only) consist of: | 1 | 1 | 1 | 1371-037 | ||
80L | Al-gasket | |||||
80Q | Al-gasket | |||||
80I | Orifice 3,3 mm | |||||
80J-1 | Coil 220/230V, 50/60 Hz. 10 W | 0.285 | 1372-537 | |||
80J-2 | Coil 110V, 50/60 Hz, 10W | 0.285 | 1372-538 | |||
80J-3 | Coil 240V, 50 Hz, 10W | 0.285 | 1372-539 | |||
80J-4 | Coil 24V, 50 Hz, 10W | 0.285 | 1372-541 | |||
Intermediate pressure connections | ||||||
90A-1 | Mixing chamber with flange | 1 | 3114-070 | |||
90B-1 | Counter flange for mixing chamber | 1 | 3115-018 | |||
90C-1 | Intermediate ring | 1 | 3422-111 | |||
90D-1 | O-ring PRP 246 -113,9 x 3,55 *) | 1 | 1331-087 | |||
90E-1 | O-ring PRP 248 -120,2 x 3,5 *) | 1 | 1331-089 | |||
90F-1 | Hexagon head screw M16 x 50 | 8 | 1424-259 | |||
90G-1 | Spring washer dia. 26,2/16,2 x 3,5 | 8 | 1424-027 | |||
90H-1 | O-ring dia. 132,9x3,5 | 1 | 1331-093 | |||
90J-1 | Cap | 1 | 2312-027 | |||
90K-1 | Gasket dia. 18/1 Ox 1.5 | 1 | 2356-123 | |||
Oil cooling - type HE8 S tor R22 | ||||||
92A-1 | Oil cooler | 1 | 1 | 1 | 4242-038 | |
92B-1 | Stop valve BMSL 10 | 0.300 | 1 | 1 | 1 | 1374-171 |
92C-1 | Thermostatic expansion valve TX 2 - 0.5 | 0.400 | 1 | 1 | 1 | 1371-305 |
92D-1 | Solenoid valve without coil | 0.350 | 1 | 1 | 1 | 1372-422 |
92N-1 | Coil 220/230V, 50/60 Hz, 10 W | 0.260 | 1372-537 | |||
92N-2 | Coil 110V. 50/60 Hz, 10W | 0.260 | 1372-538 | |||
92N-3 | Coil 240V, 50 Hz, 10W | 0.260 | 1372-539 | |||
92E-1 | Filter | 0.320 | 1 | 1 | 1 | 4522-002 |
92F-1 | Screwed connection GE 10-LR 1/4" | 0.050 | 6 | 6 | 6 | 1349-051 |
92G-1 | Single banjo connector DSVW 10-LR | 0.160 | 1 | 1 | 1 | 1349-089 |
92H-1 | Threaded nipple | 0.110 | 1 | 1 | 1 | 2314-056 |
92J-1 | Threaded plug for 8/6 mm pipe | 0.015 | 2 | 2 | 2 | 2314-053 |
92K-1 | Gasket dia. 19/14x1,5- aluminium | 0.001 | 8 | 8 | 8 | 2356-124 |
92L-1 | Connection piece for 1 pipe dia. 8 mm | 0.030 | 2 | 2 | 2 | 2333-021 |
92M-1 | Gasket - dia. 27/21 x 1,5 - aluminium | 0.001 | 3 | 3 | 3 | 2356-133 |
Oil cooling - type OOSI tor R717 | ||||||
93A-1 | Oil cooler | 1 | 1 | 1 | 4242-029 | |
93B-1 | Stop valve SN 6 | 1 | 1 | 1 | 2413-010 | |
93C-1 | Thermostatic injection TEAT 20-2 | 0.400 | 1 | 1 | 1 | 1371-240 |
93D-1 | Solenoid valve without coil | 0.445 | 1 | 1 | 1 | 1372-422 |
93N-1 | Coil 220/230V. 50/60 Hz, 10 W | 0.260 | 1372-537 | |||
93N-2 | Coil 110V. 50/60 Hz, 10W | 0.260 | 1372-538 | |||
93N-3 | Coil 240V, 50 Hz, 10W | 0.260 | 1372-539 | |||
93E-1 | Filter | 0.320 | 1 | 1 | 1 | 4522-002 |
93F-1 | Screwed connection GE 10-LR 1/4" | 0.050 | 6 | 6 | 6 | 1349-051 |
93G-1 | Single banjo connector DSVW 10-LR | 0.160 | 1 | 1 | 1 | 1349-089 |
93H-1 | Threaded nipple | 0.110 | 1 | 1 | 1 | 2314-056 |
93J-1 | Threaded plug for dia. 8/6 mm pipe | 0.015 | 4 | 4 | 4 | 2314-053 |
93K-1 | Gasket dia. 19/14 x 1,5-alunimium | 0.001 | 8 | 8 | 8 | 2356-124 |
93L-1 | Connection piece for 1 pipe dia. 8 mm | 0.030 | 4 | 4 | 4 | 2333-021 |
93M-1 | Gasket dia. 27/21 x 1,5 - aluminium | 0.001 | 3 | 3 | 3 | 2356-133 |
Chain drive for oil pump | ||||||
Chain drive complete | 3141-127 | |||||
96A-1 | Hub for chain wheel (crankshaft) | 1 | 1 | 1 | 2126-020 | |
96B-1 | Hub for chain wheel (oil pump) | 1 | 1 | 1 | 2126-019 | |
96C-1 | Chain wheel (crankshaft) | 1 | 1 | 1 | 2126-018 | |
96D-1 | Chain wheel (oil pump) | 1 | 1 | 1 | 2126-017 | |
96E-1 | Chain | 1 | 1 | 1 | 1521-102 | |
96F-1 | Hexagon head screw | 5 | 5 | 5 | 1424-150 | |
96G-1 | Spring washer | 5 | 5 | 5 | 1437-022 | |
96H-1 | Shield for oil | 1 | 1 | 1 | 3141-128 | |
98 | Thermo pump | |||||
98A-1 | Side cover for thermo pump | 2 | 2 | 2 | 3113-145 | |
98B-1 | Monitor box | 2 | 2 | 2 | 1553-215 | |
Alien screw M4x 16 | 4 | 4 | 4 | 1412-204 | ||
Spring washer dia. 4 | 4 | 4 | 4 | 1437-020 | ||
98C-1 | Level indicator | 4 | 4 | 4 | 3185-038 | |
98D-1 | Outer part for level indicator | 4 | 4 | 4 | 3185-034 | |
98E-1 | Washer dia. 20/13x1,5 | 4 | 4 | 4 | 2356-125 | |
98F-1 | Rubber cap | 4 | 4 | 4 | 1554-194 | |
98G-1 | Solenoid valve without coil | 1 | 1 | 1 | 1372-422 | |
98H-1 | Solenoid valve without coil | 2 | 2 | 2 | 1372-423 | |
98J-1 | Coil 220/230V, 50/60 Hz, 10 W | 0.260 | 1372-537 | |||
98J-2 | Coil 110V, 50/60 Hz, 10W | 0.260 | 1372-538 | |||
98J-3 | Coil 240V, 50 Hz, 10W | 0.260 | 1372-539 | |||
98K-1 | Check valve | 4 | 4 | 2 | 1364-008 | |
Straght joint 10 mm BSP | 9 | 10 | 6 | 1349-051 | ||
Socket 10mm BSP | 8 | 8 | 5 | 1349-101 | ||
T-joint 10mm | 7 | 9 | 3 | 1349-041 | ||
Strap for stop valve | 2 | 2 | 1 | 2212-059 | ||
Cable binder no. 10 | 2 | 2 | 1 | 1554-054 | ||
Alien screw M4x 12 | 4 | 4 | 2 | 1412-203 | ||
Nut M4 | 4 | 4 | 2 | 1432-035 | ||
98L-1 | Washer dia. 29/21 x 1,5 | 4 | 4 | 2 | 2356-136 | |
98M-1 | VA-joint with nozzle 1,2 mm | 7 | 9 | 3 | 2314-097 | |
Angle joint | 3 | 6 | 4 | 1349-033 | ||
Angle swivel joint 8 mm | 5 | 2 | 5 | 1349-087 | ||
Angle swivel joint 10 mm | 3 | 6 | 2 | 1349-089 | ||
Bushing 1/4" x 1/2" RG | 1 | 1 | 1 | 2312-013 | ||
Straight joint 8 mm BSP | 2 | 2 | 1349-050 | |||
Threaded nipple | 1 | 1 | 1 | 2314-056 | ||
Threaded nipple | 1 | 1 | 1 | 2314-056 | ||
Gasket dia. 27/21 x1,5Al | 2 | 2 | 2 | 2356-133 | ||
Angle joint 10 mm | 1 | 1349-112 | ||||
Connecting piece 8 mm | 1 | 1 | 2333-021 | |||
Threaded plug | 1 | 1 | 2314-053 | |||
Gasket dia. 19/14x1,5 | 2 | 2 | 2356-124 | |||
Strap | 4 | 4 | 1 | 1377-117 | ||
Spring washer for M5 | 1 | 1437-021 | ||||
Allen screw M5x 10 | 1 | 1413-330 | ||||
Hexagon set screw M6 x 12 | 2 | 2 | 1424-150 | |||
Nut M6 | 2 | 2 | 1432-061 | |||
Spring washer for M6 | 4 | 4 | 1437-022 | |||
Gasket dia. 19/14x4 | 2 | 3 | 3 | 2356-283 | ||
98N-1 | Filter | 2 | 2 | 1 | 4522-002 | |
98P-1 | Stop valve | 2 | 2 | 1 | 2412-277 | |
98Q-1 | Cooling cover | 2 | 2 | 1 | 3113-143 | |
98R-1 | Gasket for side cover | 2 | 2 | 1 | 2353-151 | |
98S-1 | Hexagon head screw M14 x 80 | 32 | 32 | 16 | 1424-081 | |
98T-1 | Oil cooler OSSI | 1 | 1 | 1 | 4242-029 | |
Socket 1/4" | 1 | 1 | 1 | 1349-101 | ||
98V | Solenoid valve without coil | 2 | 2 | 1 | 1372-453 | |
98X | PT100 sensor | 2 | 2 | 1 | 1373-253 | |
98Y | Stop valve | 2 | 2 | 1 | 2412-277 | |
98Z | Non-return valve | 2 | 2 | 1 | 1364-022 | |
98AA | Screw joint | 2 | 2 | 1 | 2314-105 | |
UNISAB | ||||||
99A-1 | Support for UNISAB | 1 | 1 | 1 | 2213-500 | |
99B-3 | Distance washers | 4 | 4 | 4 | 2212-130 | |
99C-1 | Screw for support M 10 x 20 | 2 | 2 | 2 | 1424-190 | |
99D-1 | Screw for UNISAB M6 x 20 | 4 | 4 | 4 | 1424-152 | |
99E-1 | Washers dia. 22/7 x 1,5 | 4 | 4 | 4 | 1436-025 |
Tools set for compressor SMC 104-116 Mk3 & TSMC 108-116 MR3 - type S-L-E | ||||||
Line no. A600 = Normal set, tools set no 3183-109 | ||||||
Line no. A601 = Extended set. tools set no 3183-110 | ||||||
Line no. A602A = Tools for coupling (SMC 104-108) | ||||||
Line no. A602B = Tools for coupling (SMC 112-116) | ||||||
Line no. A603 = Tools for alignment of coupling |
Pos.No | Designation | Dimension | Part No. | Line No. | ||||
A 600 | A 601 | A 602 | A603 | |||||
A | B | |||||||
1-1 | Clamp with screw, compr. type S and L | 3183-144 | 4 | 4 | ||||
1-2 | Clamp with screw, compr. type E | 3183-145 | 4 | 4 | ||||
2 | Tools for shaft seal | 3183-139 | 1 | 1 | ||||
3 | Tommy screw for cylinder liner | 3183-041 | 2 | 2 | ||||
4 | Theaded plug for unloading cylinder | 3/8" BSP | 2314-017 | 2 | 2 | |||
5 | Supporting plate for pistons | 3183-115 | 8 | 8 | ||||
6 | Spanner for heating cartridge | NV55 | 3183-060 | 1 | 1 | |||
7 | Trigger for coupling or belt pulley | 3183-059 | 1 | 1 | ||||
8 | Adjusting jig for coupling | 3183-105 | 1 | |||||
9-1 | Wrench for cylinder screw | NV 4 | 1 | |||||
9-2 | Wrench for cylinder screw | NV 5 | 1 | |||||
9-3 | Wrench for cylinder screw | NV 8 | 1 | |||||
9-4 | Wrench for cylinder screw | NV10 | 1 | |||||
9-5 | Special wrench for shaft seal | NV 4 | 1612-392 | 1 | 1 | |||
10-1 | Retaining-ring plier | J21/G | 1 | |||||
10-2 | Retaining-ring plier | A11/G | 1 | |||||
11-1 | Open end and ring spanner | NV10 | 1 | |||||
11-2 | Open end and ring spanner | NV17 | 1 | |||||
11-3 | Open end and ring spanner | NV19 | 1 | |||||
11-4 | Open end and ring spanner | NV22 | 1 | |||||
11-5 | Open end and ring spanner | NV24 | 1 | |||||
11-6 | Open end and ring spanner | NV27 | 1 | |||||
13-1 | Socket wrench | NV10 | 1 | |||||
13-2 | Socket wrench | NV13 | 1 | |||||
13-3 | Socket wrench | NV17 | 1 | |||||
13-4 | Socket wrench | NV19 | 1 | |||||
13-5 | Socket wrench | NV22 | 1 | |||||
13-6 | Socket wrench | NV24 | 1 | 1 | 1 | |||
13-7 | Socket wrench | NV27 | 1 | |||||
13-8 | Socket wrench | NV30 | 1 | |||||
13-9 | Socket wrench | NV32 | 1 | |||||
13-10 | Socket wrench | NV9/16" | 1 | |||||
13-11 | Socket wrench | NV 3/4" | 1 | 1 | ||||
13-12 | Socket wrench | NV11/16" | 1 | 1 | ||||
14 | Ratchet handle | 1 | ||||||
15 | Speed handle | 1 | ||||||
16 | Universal joint for socket wrench | 1 | ||||||
17-1 | Extension rod for socket wrench | 1 | ||||||
17-2 | Extension rod for socket wrench | 1 | ||||||
19-1 | Torque wrench 15-90 Nm | 1 | ||||||
19-2 | Torque wrench 40-200 Nm | 1 | 1 | 1 | ||||
20 | Coupler for torque wrench 1/2 | 2 | 1 | 1 | ||||
21-1 | Open spanner for torque wrench | NV11/16" | 1 | 1 | ||||
21-2 | Open spanner for torque wrench | NV 3/4" | 1 | 1 | ||||
22 | Feeler gauge | 1 |
Spare parts for SMC 186 - 188 & TSMC 188
Spare parts for SMC 186 - 188 & TSMC 188 | ||||||
Relevant drawings SMC: | 0661-606-0661-608 | |||||
Relevant drawings TSMC: | 0661-607-0661-608 | |||||
Pos. | Designation | Weight | Number each compressor | Part no. | ||
each in kg | SMC 186 | SMC 188 | TSMC 188 | |||
Compressor frame | ||||||
1A-1 | Frame SMC 186 | 1 | 3111-072 | |||
1A-2 | Frame SMC 188 | 1 | 3111-073 | |||
1A-3 | Frame TSMC 188 | 1 | 3111-074 | |||
1B-1 | Oil sight glass | 0,230 | 1 | 1 | 1 | 1226-015 |
1C-1 | O-ring 52,07 x 2,62 | 0,002 | 1 | 1 | 1 | 1331-140 |
1D-1 | Hexagon screw M6 x 18 - 8,8 DIN 933 | 0,010 | 4 | 4 | 4 | 1424-148 |
Top cover - air cooled | ||||||
2A-1 | Top cover | 2 | 3 | 2 | 3113-150 | |
2A-2 | Top cover with flange for valve | 1 | 1 | 2 | 3113-149 | |
2C-1 | Gasket for top cover | 0,125 | 3 | 4 | 4 | 2353-222 |
2E-1 | Hexagon head screw M20 x 130 - 8,8 DIN 931 | 0,360 | 46 | 62 | 60 | 1424-122 |
2F-1 | Hexagon head screw M20 x 190 - 8,8 DIN 931 | 0,510 | 2 | 2 | 4 | 1424-128 |
2G-1 | Washer 37/21 x 3 | 0,020 | 48 | 64 | 64 | 1436-077 |
Top cover - water cooled | ||||||
2A-1 | Top cover | 2 | 3 | 2 | 3113-150 | |
2A-2 | Top cover with flange for valve | 1 | 1 | 2 | 3113-149 | |
2B-1 | Water cover | 3 | 4 | 4 | 3113-151 | |
2C-1 | Gasket for top cover | 0,125 | 3 | 4 | 4 | 2353-222 |
2D-1 | Gasket for water cover | 0,210 | 3 | 4 | 4 | 2353-157 |
2E-1 | Hexagon head screw M20 x 130 | 0,360 | 4 | 6 | 4 | 1424-122 |
2E-2 | Hexagon head screw M20 x 160 - 8,8 DIN 931 | 0,400 | 42 | 56 | 56 | 1424-125 |
2F-1 | Hexagon head screw M20 x 190 - 8,8 DIN 931 | 0,510 | 2 | 2 | 4 | 1424-128 |
2G-1 | Washer 37/21 x 3 | 0,020 | 48 | 64 | 64 | 1436-077 |
2H-1 | Hexagon head screw M12 x 50 - 8,8 DIN 933 | 0,050 | 21 | 28 | 28 | 1424-219 |
2J-1 | Washer dia. 24/13x2,5 | 0,008 | 21 | 28 | 28 | 1434-036 |
Side cover - water cooled | ||||||
3A-2 | Side cover with cooling fins | 2 | 2 | 2 | 3113-153 | |
3B-1 | Water cover | 2 | 2 | 2 | 3113-151 | |
3C-1 | Gasket for side cover | 0,125 | 2 | 2 | 2 | 2353-156 |
3D-1 | Gasket for water cover | 0,210 | 2 | 2 | 2 | 2353-157 |
3E-2 | Hexagon head screw M20 x 80 - 8,8 DIN 933 | 0,240 | 28 | 28 | 28 | 1424-293 |
3E-1 | Hexagon head screw M20 x 50 - 8,8 DIN 933 | 4 | 4 | 4 | 1424-287 | |
3G-1 | Washer dia. 37/21 x 3 | 0,020 | 32 | 32 | 32 | 1436-077 |
3H-1 | Hexagon head screw M12 x 50 - 8,8 DIN 933 | 0,050 | 6 | 6 | 6 | 1424-219 |
3J-1 | Washer dia. 24/13x2,5 | 0,080 | 6 | 6 | 6 | 1436-036 |
End cover at pump end | ||||||
4A-1 | End cover at pump end | 1 | 1 | 1 | 3113-155 | |
4B-1 | Gasket for end cover | 0,135 | 1 | 1 | 1 | 2353-158 |
4C-1 | Hexagon head cover M20 x 140 - 8,8 DIN 931 | 0,360 | 14 | 14 | 14 | 1424-123 |
4D-1 | Washer dia. 37/21 x 3 | 0,020 | 14 | 14 | 14 | 1436-077 |
Bearing cover at pump | ||||||
5A-1 | Bearing cover at pump | 1 | 1 | 1 | 3113-033 | |
5B-1 | Hexagon head screw M20 x 40 - 8,8 DIN 933 | 0,120 | 6 | 6 | 6 | 1424-285 |
5C-1 | Bushing with collar | 4,280 | 1 | 1 | 1 | 2132-023 |
5C-2 | Bushing for repair (1,0 mm undersize) | 4,280 | 1 | 1 | 1 | 2132-024 |
5D-1 | Gasket for bearing cover 0,25 mm | 0,015 | 2353-016 | |||
5D-2 | Gasket for bearing cover 0,50 mm | 0,018 | 2353-017 | |||
5D-3 | Gasket for bearing cover 0,75 mm | 0,021 | 2353-018 | |||
5E-1 | Spring dowel sleeve dia. 8x16 - DIN 1481 | 0,030 | 1 | 1 | 1 | 1446-009 |
Bearing cover at shaft seal end | ||||||
6A-1 | Bearing cover | 1 | 1 | 1 | 3113-152 | |
6B-1 | Hexagon head screw M20 x 100 - 8,8 DIN | 0,340 | 14 | 14 | 14 | 1424-119 |
6C-1 | Bushing with collar | 4,280 | 1 | 1 | 1 | 2132-023 |
6C-2 | Bushing for repair (1,0 mm undersize) | 4,280 | 2 | 2 | 2 | 2132-024 |
6D-1 | Gasket | 0,065 | 1 | 1 | 1 | 2353-161 |
6E-1 | Washer dia. 37/21 x 3 | 0,020 | 14 | 14 | 14 | 1436-077 |
6F-1 | Spring dowel sleeve dia. 8x16- DIN 1481 | 0,030 | 1 | 1 | 1 | 1446-009 |
6G | Valve for prelubrication | 1 | 1 | 1 | 2412-585 | |
6H | Nut | 1 | 1 | 1 | 2313-045 | |
6J | Special joint | 1 | 1 | 1 | 2334-027 | |
6K | Cap | 1 | 1 | 1 | 2313-027 | |
6L | Joint 3/8" | 1 | 1 | 1 | 1349-053 | |
6M | Alu gasket | 1 | 1 | 1 | 2356-123 | |
Shaft seal cover | ||||||
8A-1 | Shaft seal cover | 1 | 1 | 1 | 3113-154 | |
8B-1 | Gasket | 0,036 | 1 | 1 | 1 | 2353-006 |
8C-1 | Hexagon head M14 x 40 | 0,022 | 8 | 8 | 8 | 1424-241 |
8D-1 | Hose connection 1/4" | 0,003 | 1 | 1 | 1 | 1345-143 |
8E-1 | Plastic hose 3/16" x 400 mm | 0,001 | 1 | 1 | 1 | 1241-190 |
8F | Cylindrical pin dia. 3x12 | 0,001 | 1 | 1 | 1 | 1445-054 |
Shaft seal | ||||||
10 | Shaft seal complete | 6,370 | 1 | 1 | 1 | 3126-138 |
10A-1 | Slide ring (special carbon) | 0,452 | 1 | 1 | 1 | 3126-135 |
10B-1 | Sealing ring Variseal M dia. 146,1 | 0,010 | 1 | 1 | 1 | 1331-522 |
10C-1 | O-ring dia, 151,99x3,53 | 0,006 | 1 | 1 | 1 | 1331-099 |
10D-1 | Slide ring (cast iron) | 3,385 | 1 | 1 | 1 | 3126-136 |
10E-1 | O-ring dia. 129,5x7 | 0,030 | 1 | 1 | 1 | 2353-177 |
10G-1 | Spring | 0,009 | 12 | 12 | 12 | 2142-004 |
10H-1 | Cone ring | 1,925 | 1 | 1 | 1 | 3126-137 |
10J-1 | Special screw | 0,024 | 3 | 3 | 3 | 1413-001 |
10K-1 | Spiroloxring RS 500 dia. 127 | 0,034 | 1 | 1 | 1 | 1437-298 |
10L-1 | Nut M8 | 0,004 | 3 | 3 | 3 | 1432-063 |
10M-1 | Lock washer dia. 15/8,4 x 0,8 | 0,002 | 3 | 3 | 3 | 1437-054 |
Oil pump | ||||||
11-1 | Oil pump, complete | 10,80 | 1 | 1 | 1 | 3141-130 |
11A-1 | Housing | 5,400 | 1 | 1 | 1 | 3141-008 |
11B-1 | Cover | 2,920 | 1 | 1 | 1 | 3141-012 |
11C-1 | Gasket for cover 0,2 mm | 0,001 | 1 | 1 | 1 | 2353-022 |
11D-1 | Heaxagon head screw M10 x 40 - 8,8 DIN 933 | 0,030 | 4 | 4 | 4 | 1424-194 |
HE-1 | Spring washer dia. 17/10 x 2,2 - DIN 127 | 0,002 | 8 | 8 | 8 | 1437-080 |
11F-1 | Cylindrical pin dia. 6 x 36 | 0,040 | 2 | 2 | 2 | 1445-061 |
11G-1 | Pump gear wheel | 1,080 | 1 | 1 | 1 | 3141-044 |
11H-1 | Pump gear wheel | 1,260 | 1 | 1 | 1 | 3141-045 |
11J-1 | Key 6x6x15 | 0,005 | 1 | 1 | 1 | 1526-051 |
11K-1 | Threaded nipple 12x1 1/8" | 0,418 | 2 | 2 | 2 | 2311-043 |
11L-1 | Gasket for nipple dia. 50/40 x 1,5 | 0,002 | 2 | 2 | 2 | 2356-056 |
11AB-1 | Hexagon head screw M10 x 40 - 8,8 DIN 933 | 0,030 | 4 | 4 | 4 | 1424-194 |
Chain drive | ||||||
11M-1 | Chain wheel 1/2" x 25 (pump) | 0,750 | 1 | 1 | 1 | 2126-022 |
11N-1 | Washer dia. 30/17x3 | 0,005 | 1 | 1 | 1 | 1436-017 |
11P-1 | Locking nut M 16 | 0,040 | 1 | 1 | 1 | 1433-083 |
11Q-1 | Chain wheel 1/2" x 28 (crankshaft) | 0,470 | 1 | 1 | 1 | 2126-023 |
11R-1 | Hub for chainwheel | 0,730 | 1 | 1 | 1 | 2126-024 |
11 S-1 | Hexagon head screw M14 x 40 - 8,8 DIN 933 | 0,945 | 2 | 2 | 2 | 1424-241 |
11T-1 | Spring washer dia. 23/14 x 3 | 0,004 | 2 | 2 | 2 | 1437-030 |
11U-1 | Chain 1/2" 58 endless | 0,510 | 1 | 1 | 1 | 1521-105 |
11V-1 | Guide shield for oil | 0,380 | 1 | 1 | 1 | 3141-136 |
11X-1 | Hexagon head screw M6 x 12 | 0,003 | 2 | 2 | 2 | 1413-339 |
11Y-1 | Spring washer dia. 11,1/6,1 x 1,6 | 0,005 | 2 | 2 | 2 | 1437-022 |
Unloading cylinder SMC • TSMC (LP) See drawing no 0661-602 | ||||||
12-1 | Unloading cylinder complete L = 122, S = 49 | 8,400 | 1 | 1 | 3135-019 | |
12-2 | Unloading cylinder complete L = 167, S = 94 | 8,500 | 1 | 1 | 1 | 3135-020 |
12-3 | Unloading cylinder complete L = 212, S = 139 | 8,600 | 1 | 1 | 1 | 3135-021 |
12-4 | Unloading cylinder complete L = 257, S = 184 | 8,700 | 1 | 1 | 3135-022 | |
12A-1 | Unloading cylinder SMC -TSMC (LP) | 6,700 | 3 | 4 | 3 | 3135-030 |
12B-1 | Piston | 0,800 | 3 | 4 | 3 | 3135-035 |
12C-1 | Piston rod L= 122 | 0,200 | 1 | 1 | 3135-046 | |
12C-2 | Piston rod L= 167 | 0,250 | 1 | 1 | 1 | 3135-047 |
12C-3 | Piston rod L= 212 | 0,300 | 1 | 1 | 1 | 3135-048 |
12C-4 | Piston rod L= 257 | 0,350 | 1 | 1 | 3135-049 | |
12D-1 | Threaded plug - 3/8" BSP | 0,065 | 3 | 4 | 3 | 2314-025 |
12E-1 | Gasket dia. 25/17x1,5 | 0,002 | 3 | 4 | 3 | 2356-130 |
12F-1 | Seeger ring dia. 85 | 0,030 | 3 | 4 | 3 | 1437-165 |
12G-1 | Spring guide | 0,100 | 3 | 4 | 3 | 2145-005 |
12H-1 | Spring retainer | 0,200 | 3 | 4 | 3 | 3135-058 |
12J-1 | Spring dia. 4/40 x 88 | 0,100 | 3 | 4 | 3 | 2142-041 |
12J-2 | Spring dia. 5/55 x 88 | 0,170 | 3 | 4 | 3 | 2142-042 |
12K-1 | Benzing ring dia. 12 | 0,001 | 3 | 4 | 3 | 1437-108 |
12K-2 | Benzing ring dia. 9 | 0,001 | 3 | 4 | 3 | 1437-105 |
12T-1 | O-ring neoprene dia. 142,7 x 3,5 | 0,010 | 3 | 4 | 3 | 1331-096 |
12U-1 | Hexagon head screw M14 x 50 | 0,075 | 12 | 16 | 12 | 1424-243 |
12V-1 | Washer dia. 28/15x2,5 | 0,010 | 12 | 16 | 12 | 1436-037 |
Unloading cylinder TSMC (HP) See drawing no 0661-602 | ||||||
12-5 | Unloading cylinder complete TSMC (HP) | 9,200 | 1 | 3135-165 | ||
12A-2 | Unloading cylinder | 8,800 | 1 | 3135-032 | ||
12B-1 | Piston | 0,800 | 1 | 3135-035 | ||
12C-5 | Piston rod for TSMC (HP) | 0,200 | 1 | 3135-166 | ||
12D-1 | Threaded plug 3/8" BSP | 0,065 | 1 | 2314-025 | ||
12E-1 | Gasket dia. 25/17x1,5 | 0,002 | 1 | 2356-130 | ||
12G-5 | Spring guide | 0,110 | 1 | 3135-095 | ||
12H-5 | Cover | 0,690 | 1 | 3135-106 | ||
12J-1 | Spring dia. 4/40 x 88 | 0,100 | 1 | 2142-041 | ||
12J-2 | Spring dia. 5/55 x 88 | 0,170 | 1 | 2142-042 | ||
12K-5 | Benzing ring dia. 9 | 0,001 | 2 | 1437-105 | ||
12N-1 | Gasket for cover dia. 110/80 x 1 | 0,025 | 1 | 2353-026 | ||
12P-1 | Hexagon head screw M6 x 20 | 0,009 | 6 | 1424-152 | ||
12Q-1 | O-ring neoprene PRP 112 | 0,001 | 1 | 1331-013 | ||
12R-1 | Self locking nut 3/8" INF | 0,010 | 1 | 1433-100 | ||
12S-1 | Washer dia. 21/10,5x2 | 0,005 | 1 | 1436-035 | ||
12T-1 | O-ring neoprene dia. 142,7 x 3,5 | 0,010 | 1 | 1331-096 | ||
12U-1 | Hexagon head screw M14 x 50 | 0,075 | 4 | 1424-243 | ||
12V-1 | Washer dia. 28/15 x 2,5 | 0,010 | 4 | 1436-037 | ||
Frame for unloading mechanism | ||||||
13A-1 | Suspension rod (right) | 1,340 | 3 | 4 | 4 | 3135-067 |
13B-1 | Suspersion rod (left) | 1,340 | 3 | 4 | 4 | 3135-068 |
13C-1 | Cross piece at piston rod | 1,240 | 3 | 4 | 4 | 3135-077 |
13D-1 | Cross piece | 1,220 | 3 | 4 | 4 | 3135-083 |
13E-1 | Counter sunk screw M6 x 25 | 0,006 | 12 | 16 | 16 | 1413-100 |
Bracket for unloading mechanism | ||||||
14A-1 | Bracket with pin | 0,250 | 6 | 8 | 7 | 3135-061 |
14B-1 | Spacing ring for bracket | 0,015 | 12 | 16 | 14 | 2124-005 |
14C-1 | Hexagon head screw M8 x 45 | 0,010 | 12 | 16 | 14 | 1424-172 |
14D-1 | Spring washer | 0,002 | 12 | 16 | 14 | 1437-023 |
Rocker for unloading mechanism | ||||||
15A-1 | Rocker arm | 0,100 | 12 | 16 | 16 | 3135-097 |
15B-1 | Bearing cup (without thread) | 0,020 | 12 | 16 | 12 | 3135-100 |
15B-2 | Bearing cup (with thread) TSMC HP | 0,035 | 4 | 3135-102 | ||
15C-1 | Spring holders | 0,002 | 12 | 16 | 16 | 2145-002 |
15D-1 | Spring | 0,052 | 12 | 16 | 16 | 2142-046 |
15E-1 | Washer for regulation of bearing cup | 0,004 | 3142-016 | |||
Crankshaft | ||||||
*16-1 | Crankshaft SMC186 | 213,000 | 1 | 3121-118 | ||
*16-2 | Crankshaft SMC 188-TSMC 188 | 223,000 | 1 | 1 | 3121-119 | |
16A-1 | Lock washer | 1,890 | 1 | 1 | 1 | 3121-117 |
16B-1 | Hexagon head screw M14 x 45 - 8,8 DIN 933 | 0,010 | 2 | 2 | 2 | 1424-242 |
16C-1 | Spring washer dia. 23,3/14,2 x 3 | 0,004 | 2 | 2 | 2 | 1437-030 |
16D-1 | Key 32x18x100 | 0,360 | 1 | 1 | 1 | 2123-007 |
Connecting rod | ||||||
*17-1 | Connecting rod, complete, SMC-TSMC LP | 12,300 | 6 | 8 | 6 | 3123-005 |
*17-2 | Connecting rod, complete, TSMC HP | 12,300 | 2 | 3123-103 | ||
*17-3 | Connecting rod with piston complete, TSMC HP | 19,200 | 2 | 3123-104 | ||
17A-1 | Half-section of bearing | 0,180 | 12 | 16 | 16 | 2133-005 |
17A-2 | Half-section of bearing for repair | 0,180 | 12 | 16 | 16 | 2133-006 |
17B-1 | Bushing for piston pin, SMC-TSMC LP | 1,140 | 6 | 8 | 6 | 2132-006 |
17B-2 | Needle roller bearing TSMC HP | 0,370 | 4 | 1511-006 | ||
17C-1 | Connection rod bolt | 0,200 | 12 | 16 | 16 | 2111-066 |
17D-1 | Self lock nut 5/8" UNF | 0,030 | 12 | 16 | 16 | 1433-118 |
Piston See drawing no 0661-602 | ||||||
18-1 | Piston with pin and rings | 6,075 | 6 | 8 | 8 | 3124-053 |
18A-1 | Piston pin | 1,965 | 6 | 8 | 8 | 3125-119 |
18C-1 | Piston ring TOP mark | 0,105 | 12 | 16 | 16 | 3125-128 |
18D-1 | Oil scraper ring | 0,115 | 6 | 8 | 8 | 3125-077 |
18E-1 | Seeger ring dia. 70 mm | 0,020 | 12 | 16 | 16 | 1437-159 |
Cylinder liner with suction valve See drawing no 0661-602 | ||||||
19-1 | Cylinder liner with suction valve R717 | 26,480 | 6 | 8 | 6 | 3112-067 |
19-2 | Cylinder liner with suction valve HCFC | 26,480 | 6 | 8 | 6 | 3112-069 |
19-3 | Cylinder liner with suction valve R717 TSMC HP | 26,340 | 2 | 3112-068 | ||
19-4 | Cylinder liner with suction valve HCFC TSMC HP | 26,340 | 2 | 3112-070 | ||
19A-1 | Cylinder liner | 17,130 | 6 | 8 | 8 | 3112-066 |
19B-1 | Unloading ring with pins | 1,238 | 6 | 8 | 8 | 3135-063 |
19C-1 | Washer dia. 8 x 5,3 x 0,5 | 0,001 | 72 | 96 | 96 | 2114-020 |
19D-1 | Spring for unloading ring | 0,002 | 72 | 96 | 96 | 2142-035 |
19E-1 | Tension spiral | 0,040 | 6 | 8 | 8 | 2142-049 |
19F-1 | Ring plates for suction valve | 0,060 | 6 | 8 | 8 | 3131-064 |
19G-1 | Valve spring | 0,006 | 36 | 48 | 48 | 2141-050 |
19H-1 | Suction valve retaining plate R717 | 5,380 | 6 | 8 | 8 | 2132-058 |
19H-2 | Suction valve retaining plate HCFC | 5,380 | 6 | 8 | 8 | 3132-061 |
19J-1 | Guide ring for discharge valve | 2,180 | 6 | 8 | 8 | 3134-007 |
19K-1 | Gasket for cylinder liner - 0,5 mm | 0,006 | 6 | 8 | 8 | 2356-116 |
19K-2 | Gasket for cylinder liner - 0,8 mm | 0,010 | 6 | 8 | 8 | 2356-249 |
19M-1 | O-ring only TSMC HP | 0,060 | 2 | 1331-105 | ||
19N-1 | Socket cap screw M8x60 DIN 912 | 0,026 | 72 | 96 | 96 | 1413-364 |
Discharge valve See drawing no 0661 -602 | ||||||
20-1 | Discharge valve complete R717 HP | 2 | 3136-076 | |||
20-2 | Discharge valve complete R22 HP | 2 | 3136-075 | |||
20-3 | Discharge valve complete R717 LP | 6 | 8 | 6 | 3136-078 | |
20-4 | Discharge valve complete R22 LP | 6 | 8 | 6 | 3136-077 | |
20A-1 | Discharge valve seat | 1,830 | 6 | 8 | 8 | 3133-019 |
20B-1 | Valve retaining plate R717 HP | 4,005 | 2 | 3132-063 | ||
20B-2 | Valve retaining plate R22 HP | 4,005 | 2 | 3132-062 | ||
20B-3 | Valve retaining plate R717 LP | 4,005 | 6 | 8 | 6 | 3132-065 |
20B-4 | Valve retaining plate R22 LP | 4,005 | 6 | 8 | 6 | 3132-066 |
20C-1 | Ring plate for discharge valve | 0,045 | 6 | 8 | 8 | 3131-065 |
20D-1 | Special screw | 0,415 | 6 | 8 | 8 | 2111-111 |
20E-1 | Nut M24 x 2 - DIN 934 | 0,094 | 12 | 16 | 16 | 1432-052 |
20F-1 | Spring guide | 0,040 | 6 | 8 | 8 | 2145-020 |
20G-1 | Valve spring (valve for 20B-1 and 2) | 0,006 | 72 | 96 | 24 | 2141-050 |
20G-2 | Valve spring (valve for 20B-3 and 4) | 0,006 | 36 | 48 | 36 | 2141-050 |
20K-1 | Guide for ring plate R717 | 0,175 | 6 | 8 | 8 | 3132-060 |
20K-2 | Guide for ring plate R22 | 0,180 | 6 | 8 | 8 | 3132-064 |
Spring for safety head | ||||||
21-1 | Spring | 0,400 | 6 | 8 | 8 | 2142-057 |
Oil pressure valve | ||||||
22-1 | Oil pressure valve complete | 0,450 | 1 | 1 | 1 | 3142-150 |
22G-1 | Gasket 90 x 44 x 1 | 0,001 | 1 | 1 | 1 | 2354-075 |
22H-1 | Hexagon head screw M12 x 35 - 8,8 DIN 933 | 0,040 | 2 | 2 | 2 | 1424-216 |
Oil changing valve | ||||||
23A-1 | Oil changing valve complete | 0,300 | 1 | 1 | 1 | 2412-585 |
23B-1 | Threaded reducing nipple | 0,155 | 1 | 1 | 1 | 2311-059 |
23C-1 | Socket | 0,075 | 1 | 1 | 1 | 2313-035 |
23D-1 | Gasket | 0,001 | 1 | 1 | 1 | 2356-123 |
23E-1 | Gasket | 0,001 | 1 | 1 | 1 | 2356-140 |
23F-1 | Gasket | 0,001 | 1 | 1 | 1 | 2356-283 |
23G-1 | Nut | 0,060 | 1 | 1 | 1 | 2313-027 |
By-pass valves | ||||||
24-1 | By-pass valve dia. 38 TSMC LP 12 bar | 10,240 | 1 | 2416-057 | ||
24-2 | By-pass valve dia. 38 SMC 18 bar | 10,215 | 1 | 1 | 2416-058 | |
24-3 | By-pass valve dia. 38 SMC 21 bar | 10,230 | 1 | 1 | 2416-059 | |
24-4 | By-pass valve dia. 38 SMC 24 bar | 10,240 | 1 | 1 | 2416-060 | |
24-5 | By-pass valve dia. 28 TSMC HP 22 bar | 3,600 | 1 | 3137-007 | ||
24-6 | By-pass valve dia. 28 TSMC HP 24 bar | 3,600 | 1 | 3137-009 | ||
24C-1 | O-ring for cylinder dia. 72,6 x 3,5 | 0,040 | 1 | 1 | 1 | 1331-074 |
24C-5 | O-ring for cylinder dia. 50,4 x 3,5 | 0,002 | 1 | 1331-067 | ||
24E-1 | O-ring for cover dia. 85,3 x 3,5 | 0,002 | 1 | 1 | 1 | 1331-078 |
24E-5 | O-ring for cover dia. 63,1 x 3,5 | 0,002 | 1 | 1331-071 | ||
24G-1 | Hexagon head screw M10 x 30 - 8,8 DIN 933 | 0,018 | 4 | 4 | 4 | 1424-192 |
24G-5 | Hexagon head screw M8 x 25,5 - 8,8 DIN 933 | 0,015 | 4 | 1424-168 | ||
24H-1 | Spring washer dia. 17,2/10,2 x 2 | 0,002 | 4 | 4 | 4 | 1437-033 |
24H-5 | Spring washer dia. 14,2/8,2 x 2 | 0,002 | 4 | 1437-023 |
Pos. | Designation | Weight | DIM | Number each compressor | Part no. | ||
each in kg | SMC 186 | SMC 188 | TSMC 188 | ||||
25-1 | Stop valves complete discharge HP | 13,700 | 65 | 1 | 2414-072 | ||
25-2 | Stop valves complete inlet HP | 100 | 1 | 2411-264 | |||
25-3 | Stop valves complete discharge LP | 100 | 1 | 1 | 1 | 2414-070 | |
25-4 | Stop valves complete inlet LP | 150 | 1 | 1 | 1 | 2414-037 | |
25A-1 | Housing | 3,080 | 65 | 1 | 2432-142 | ||
25A-2 | Housing | 3,210 | 100 | 1 | 2432-144 | ||
25A-3 | Housing | 100 | 1 | 1 | 1 | 2432-160 | |
25A-4 | Housing | 150 | 1 | 1 | 1 | 2432-109 | |
25B-1 | Valve bonnet | 3,200 | 65 | 1 | 2433-029 | ||
25B-2 | Valve bonnet | 4,500 | 100 | 1 | 1 | 2 | 2433-030 |
25B-4 | Valve bonnet | 14,660 | 150 | 1 | 1 | 1 | 2433-009 |
25C-1 | Front part for cone | 0,028 | 65 | 1 | 2444-092 | ||
25C-2 | Front part for cone | 0,520 | 100 | 1 | 1 | 2 | 2444-094 |
25C-4 | Front part for cone | 1,550 | 150 | 1 | 1 | 1 | 2444-006 |
25D-1 | Back part for cone | 4,440 | 65 | 1 | 2444-093 | ||
25D-2 | Back part for cone | 1,000 | 100 | 1 | 1 | 2 | 2444-095 |
25D-4 | Back part for cone | 5,100 | 150 | 1 | 1 | 1 | 2444-087 |
25E-1 | Screw for cone | 0,120 | 65-100 | 1 | 1 | 3 | 2444-018 |
25E-4 | Screw for cone | 0,350 | 150 | 1 | 1 | 1 | 2444-019 |
25F-1 | Gasket for screw | 0,001 | 65-100 | 1 | 1 | 3 | 2356-141 |
25F-4 | Gasket for screw | 0,001 | 150 | 1 | 1 | 1 | 2356-144 |
25G-1 | Threaded connection | 0,340 | 65 | 1 | 2445-054 | ||
25G-2 | Threaded connection | 0,400 | 100 | 1 | 1 | 2 | 2445-055 |
25G-4 | Threaded connection | 0,800 | 150 | 1 | 1 | 1 | 2445-049 |
25H-1 | Sealing ring | 0,015 | 65 | 1 | 2354-115 | ||
25H-2 | Sealing ring | 0,020 | 100 | 1 | 1 | 2 | 2354-117 |
25H-4 | Sealing ring | 0,010 | 150 | 1 | 1 | 1 | 2354-007 |
25J-1 | O-ring for bonnet 94,6 x 5,3 | 0,004 | 65 | 1 | 1331-161 | ||
25J-2 | O-ring for bonnet 116,8 x 7 | 0,006 | 100 | 1 | 1 | 2 | 1331-198 |
25J-4 | O-ring for bonnet 202,79 x 3,5 | 0,008 | 150 | 1 | 1 | 1 | 1331-107 |
25K-1 | Valve spindle | 0,420 | 65 | 1 | 2442-030 | ||
25K-2 | Valve spindle | 0,480 | 100 | 1 | 1 | 2 | 2442-028 |
25K-4 | Valve spindle | 1,000 | 150 | 1 | 1 | 1 | 2442-006 |
25L-1 | Lock washer | 0,015 | 65-100 | 1 | 1 | 3 | 2445-020 |
25L-4 | Lock washer | 0,025 | 150 | 1 | 1 | 1 | 2445-021 |
25M-1 | Packing gland complete | 0,250 | 65-100 | 1 | 1 | 3 | 2452-004 |
25M-4 | Packing gland complete | 0,350 | 150 | 1 | 1 | 1 | 2452-005 |
25N-1 | Guide pin dia. 5x10 | 0,003 | 65-100 | 1 | 1 | 1 | 1446-085 |
25N-4 | Guide screw | 0,006 | 150 | 1 | 1 | 1 | 2111-036 |
25P-1 | O-ring dia. 28,1 x 3,5 | 0,002 | 65-100 | 1 | 1 | 3 | 1331-024 |
25P-4 | O-ring dia. 31,5x3,5 | 0,003 | 150 | 1 | 1 | 1 | 1331-026 |
25Q-1 | Nylon washer dia. 34/22 x 1,5 | 0,002 | 100 | 1 | 1 | 3 | 2354-017 |
25Q-4 | Nylon washer dia. 39,5/28 x 1,5 | 0,002 | 150 | 1 | 1 | 1 | 2354-018 |
25R-1 | Hexagon head screw M10 x 25 8,8 - DIN 9,33 | 0,020 | 65 | 8 | 1424-191 | ||
25R-2 | Hexagon head screw M12 x 30 8,8 - DIN 9,33 | 0,040 | 100 | 8 | 1424-215 | ||
25R-4 | Hexagon head screw M20 x 65 8,8 - DIN 9,33 | 0,210 | 150 | 6 | 6 | 6 | 1424-290 |
25S-1 | Hand wheel dia. 140 | 0,800 | 65 | 1 | 1365-033 | ||
25S-2 | Hand wheel dia. 180 | 1,000 | 100 | 1 | 1 | 2 | 1365-035 |
25S-4 | Hand wheel dia. 230 | 1,800 | 150 | 1 | 1 | 1 | 2435-011 |
25T-1 | Hexagon head screw M8 x 16 | 0,010 | 65-100 | 1 | 1 | 3 | 1424-166 |
25T-4 | Hexagon head screw M8 x 18 | 0,010 | 150 | 1 | 1 | 1 | 1424-164 |
25U-1 | Washer for hand wheel dia. 28/9,5 | 0,010 | 2 | 2 | 4 | 1436-026 | |
25V-4 | Spring washer dia. 10 | 0,002 | 150 | 1 | 1437-033 | ||
25Y-1 | O-ring dia. 21,8x3,5 | 0,002 | 65-100 | 2 | 2 | 6 | 1331-020 |
25Y-4 | O-ring dia. 25,57 x 3,53 | 0,002 | 150 | 2 | 2 | 2 | 1331-023 |
25AA-1 | Gaske against frame | 0,020 | 65 | 1 | 2354-106 | ||
25AA-3 | Gaske against frame | 0,020 | 100 | 1 | 1 | 1 | 2354-106 |
25AA-4 | Gaske against frame | 0,038 | 150 | 1 | 1 | 1 | 2354-120 |
25AB-1 | Hexagon head screw M16 x 45 | 0,095 | 65 | 4 | 1424-102 | ||
25AB-3 | Hexagon head screw M16 x 45 | 0,095 | 100 | 4 | 4 | 4 | 1424-102 |
25AB-4 | Hexagon head screw M20 x 65 | 0,125 | 150 | 6 | 6 | 6 | 1424-290 |
25AC-4 | Washer | 0,014 | 150 | 6 | 6 | 6 | 1436-039 |
25AD-3 | Welding nipple | 1,130 | 100 | 1 | 1 | 1 | 2322-118 |
25AD-4 | Welding nipple | 5,420 | 150 | 1 | 1 | 1 | 2322-111 |
25AE-3 | Gasket for welding nipple | 0,025 | 100 | 1 | 1 | 1 | 2356-104 |
25AE-4 | Gasket for welding nipple | 0,040 | 150 | 1 | 1 | 1 | 2356-115 |
25AF-3 | Counter flange | 2,800 | 100 | 1 | 1 | 1 | 2344-005 |
25AF-4 | Counter flange | 4,880 | 150 | 1 | 1 | 1 | 2344-007 |
25AG-3 | Hexagon head screw M16 x 55 | 0,050 | 100 | 4 | 4 | 4 | 1424-104 |
25AG-4 | Hexagon head screw M20 x 65 | 0,125 | 150 | 6 | 6 | 6 | 1424-290 |
Pos. | Designation | Weight | Number each compressor | Part no. | ||
each in kg | SMC 186 | SMC 188 | TSMC 188 | |||
Pressure gauges and parts Suction and oil pressure gauge | ||||||
30A-1 | R717 | 1,640 | 1 | 1 | 1 | 1541-108 |
30A-2 | R12, R22andR502 | 1,640 | 1 | 1 | 1 | 1541-232 |
30A-3 | R22, R134a,andR404A | 1,620 | 1 | 1 | 1 | 1541-074 |
30B-1 | Nozzle and gasket dia. 14/08 x 1,5 | 0,001 | 1 | 1 | 1 | 3146-013 |
30C-1 | Gasket dia. 11/4x 1,5 | 0,001 | 1 | 1 | 1 | 2356-119 |
30D-1 | Cylinder head screw M4 x 20 | 0,001 | 3 | 3 | 3 | 1412-350 |
Discharge pressure gauge SMC | ||||||
31A-3 | R717 | 1,380 | 1 | 1 | 1541-029 | |
31A-4 | R12, R22andR502 | 1,400 | 1 | 1 | 1541-160 | |
31A-5 | R22, R134a, and R404A | 1,400 | 1 | 1 | 1541-075 | |
31A-1 | Nozzle and gasket dia. 14/0,8 x 1,5 | 0,001 | 1 | 1 | 3146-013 | |
31C-1 | Cylinder head screw M4 x 20 | 0,001 | 3 | 3 | 1412-350 | |
Discharge pressure gauge TSMC | ||||||
31A-3 | R717 | 1,600 | 1 | 1541-101 | ||
31A-4 | R12, R22andR502 | 1,660 | 1 | 1541-161 | ||
31A-5 | R22, R134a, and R404A | 1,660 | 1 | 1541-076 | ||
31A-1 | Nozzle and gasket dia. 14/0,8 x 1,5 | 0,001 | 2 | 3146-013 | ||
31C-1 | Cylinder head screw M4 x 20 | 0,001 | 3 | 1412-350 | ||
Oil filter | ||||||
33-1 | Oil filter complete | 1 | 1 | 1 | 4524-037 | |
33A-1 | Filter element | 1 | 1 | 1 | 1517-119 | |
33B-1 | Gasket | 2 | 2 | 2 | 2356-104 | |
33C-1 | End cover | 1 | 1 | 1 | 3422-148 | |
33D-1 | Rod for filter | 1 | 1 | 1 | 2112-142 | |
33E-1 | Shield for oil filter | 1 | 1 | 1 | 2158-207 | |
33F-1 | Bracket with connection | 1 | 1 | 1 | 2331-049 | |
33G-1 | Distance piece | 1 | 1 | 1 | 2212-136 | |
33H-1 | Rubber gasket | 1 | 1 | 1 | 1334-012 | |
33J-1 | Magnet | 3 | 3 | 3 | 1517-022 | |
33K-1 | Iron ring | 1 | 1 | 1 | 2114-038 | |
33L-1 | Washer dia. 17 | 1 | 1 | 1 | 1436-034 | |
33M-1 | Washer dia. 24 | 1 | 1 | 1 | 1436-036 | |
33N-1 | Nut M8 | 1 | 1 | 1 | 1433-073 | |
330-1 | Nut M12 | 1 | 1 | 1 | 1433-075 | |
33P-1 | O-ring | 1 | 1 | 1 | 1331-009 | |
33Q-1 | O-ring | 1 | 1 | 1 | 1331-008 | |
Suction filter | ||||||
34-1 | Suction filter oben with filter bag | 1,052 | 2 | 2 | 1 | 3425-100 |
34-2 | Suction filter closed with filter bag | 2,070 | 1 | 3425-102 | ||
24B-1 | Filter bag | 0,094 | 2 | 2 | 2 | 3425-098 |
34C-1 | Insert for filter bag | 0,058 | 2 | 2 | 2 | 3424-062 |
34D-1 | O-ring for filter dia. 132,7 x 5,3 | 0,020 | 2 | 2 | 3 | 1331-170 |
34E-1 | Cover | 8,210 | 2 | 2 | 1 | 3422-123 |
34F-1 | O-ring for cover | 0,006 | 2 | 2 | 1 | 1331-099 |
34G-1 | Hexagon head screw M16 x 55 | 0,050 | 8 | 8 | 4 | 1424-104 |
34H-1 | Spring washer dia. 16 | 0,004 | 8 | 8 | 4 | 1437-027 |
Discharge pipe for oil pump | ||||||
38A-1 | Discharge pipe for oil pump | 1,395 | 1 | 1 | 1 | 3141-134 |
38B-1 | Connection for discharge pipe | 0,335 | 1 | 1 | 1 | 2333-050 |
38C-1 | O-ring dia. 28,15x3,5 | 0,002 | 1 | 1 | 1 | 1331-024 |
38D-1 | O-ring dia. 43,8 x 5,33 | 0,006 | 1 | 1 | 1 | 1331-033 |
Gauge panel | ||||||
39A-1 | Gauge panel | 0,070 | 1 | 1 | 1 | 3146-042 |
39B-1 | Socket cap screw M10 x 60 | 0,050 | 2 | 2 | 2 | 1413-382 |
39C-1 | Liner plate for gauge panel | 0,004 | 2 | 1 | 1 | 2212-063 |
Cooling water connection | ||||||
40-1 | Set of hoses and connections SMC 186 | 4,550 | 1 | 3185-058 | ||
40-2 | Set of hoses and connection T/SMC | 4,700 | 1 | 1 | 3185-059 | |
40A-1 | Hose nipple dia. 19 x 3/4" | 0,015 | 14 | 16 | 16 | 2334-026 |
40B-1 | Angle - 3/4" BSP | 0,136 | 8 | 10 | 10 | 1341-092 |
40C-1 | T-piece 1" x 3/4" x 3/4" BSP | 0,206 | 1 | 1 | 1 | 1352-030 |
40D-1 | Redusing socket 1" x 3/4" BSP | 0,124 | 1 | 1 | 1 | 1352-030 |
40E-1 | Cable binder | 0,002 | 3 | 3 | 3 | 1554-062 |
40F-1 | Hose ctampS 28/15 | 0,024 | 14 | 16 | 16 | 1345-183 |
40G-1 | T-piece 3/4" x 3/4" x 3/4" | 0,176 | 1 | 1 | 1 | 1341-143 |
40H-1 | Nipple 3/4" x 40 | 0,052 | 1 | 1 | 1 | 1345-040 |
Pipe connection for gauges pressure controls and oil filter (by-pass) | ||||||
41A-1 | Threaded nipple 3/4" x 1/1" BSP | 1 | 1 | 1 | 2314-064 | |
41B-1 | Gasket dia. 34/27 x 1,5 against frame | 0,001 | 1 | 1 | 1 | 2356-140 |
41C-1 | Plug for banjo | 0,031 | 1 | 1 | 1 | 2314-058 |
41D-1 | Gasket for banjo dia. 19/14x1,5 | 0,001 | 2 | 2 | 2 | 2356-124 |
41E-1 | Straight screw-in joint 1/4" BSP for OD 8 | 0,044 | 1 | 1 | 1 | 1349-050 |
41F-1 | Threaded nipple 1/2" x 1/4" BSP | 0,110 | 1 | 1 | 1 | 2314-056 |
41G-1 | Gasket against frame dia. 27 x 21 | 0,001 | 1 | 1 | 1 | 2356-133 |
41H-1 | Plug for double banjo | 0,036 | 1 | 1 | 1 | 2314-059 |
41J-1 | Gasket for banjo | 0,001 | 3 | 3 | 3 | 2356-124 |
41K-1 | Plug for banjo | 0,040 | 1 | 1 | 1 | 2314-048 |
41L-1 | Gasket for banjo | 0,001 | 2 | 2 | 2 | 2356-124 |
41M-1 | Distributor with 2 sockets | 1 | 1 | 2 | 2333-043 | |
41N-1 | Straight screw-in joint 1/4" BSP for OD 8 | 0,042 | 1 | 1 | 2 | 1349-050 |
41P-1 | Gasket for union dia. 9/3 x 1 | 0,001 | 4 | 4 | 7 | 2356-117 |
41Q-1 | Angle swivel screw-joint 1/4" BSP for OD 8 | 0,100 | 1 | 1 | 2 | 1349-087 |
41R-1 | Threaded plug 1/4" BSP | 0,350 | 5 | 6 | 6 | 2314-022 |
41T-1 | Gasket for plug dia. 19/14 x 1,5 | 0,001 | 5 | 6 | 6 | 2356-124 |
Purge valve | ||||||
42A-1 | Purge valve, complete | 0,300 | 1 | 1 | 1 | 2412-585 |
42B-1 | Threaded nipple | |||||
42C-1 | Cutting ring | 0,135 | 1 | 1 | 1 | 1349-062 |
42D-1 | Nut | |||||
42E-1 | Nut | 0,070 | 1 | 1 | 1 | 2313-045 |
42F-1 | Connection pipe with collar | 0,025 | 1 | 1 | 1 | 2334-027 |
42G-1 | Gasket | 0,001 | 2 | 2 | 2 | 2356-123 |
42H-1 | Nut | 0,060 | 1 | 1 | 1 | 2313-027 |
Pressure controls for R717 | ||||||
45A-1 | KP5A | 0,300 | 1 | 1373-125 | ||
45B-1 | KP15A | 0,760 | 1 | 1 | 1 | 1373-142 |
45C-1 | MP55A | 0,900 | 1 | 1 | 1 | 1373-162 |
Pressure controls for HCFC | ||||||
45D-1 | KP5 | 0,300 | 1 | 1373-123 | ||
45E-1 | KP15 | 0,540 | 1 | 1 | 1 | 1373-135 |
45F-1 | MP55 | 0,800 | 1 | 1 | 1 | 1373-159 |
Temperature controls | ||||||
45G-1 | KP98 | 0,720 | 1 | 1 | 1 | 1373-043 |
45H-1 | KP77 | 0,350 | 1 | 1 | 1 | 1373-044 |
45L-1 | Phial pocket for temperature controls | 0,770 | 2 | 2 | 2 | 1377-171 |
45M-1 | Gasket for phial pocket dia. 27/21 x 1,5 | 0,001 | 2 | 2 | 2 | 2356-133 |
45N-1 | Threaded plug 1/2" BSP | 0,065 | 1 | 1 | 1 | 2314-026 |
45P-1 | Gasket for plug dia. 27/21 x 1,5 | 0,001 | 1 | 1 | 1 | 2356-133 |
Coupling type 450S | ||||||
48A-1 | Coupling fine (2 sets) | 2,792 | 1 | 1 | 1 | 1524-161 |
48B-1 | Coupling bolts | 0,236 | 16 | 16 | 16 | 1524-169 |
48C-1 | Lock nuts | 0,056 | 16 | 16 | 16 | 1524-177 |
48D-1 | Washer | 0,042 | 16 | 16 | 16 | 1524-185 |
48E-1 | Washer | 4 | 4 | 4 | 1524-189 | |
Capacity regulation | ||||||
50A-1 | Valve body with 1 solenoid valve without coil | 1 | 3143-384 | |||
50A-2 | Valve body with 2 solenoid valves without coils | 1 | 1 | 3143-385 | ||
50B-1 | Coil 220/230, 50/60 Hz, 10W | 0,260 | 1372-537 | |||
50B-2 | Coil 110 50/60 Hz, 10W | 0,260 | 1372-538 | |||
50B-3 | Coil 240 50 Hz, 10W | 0,260 | 1372-539 | |||
50C | Solenoid valve (service kit for 1 solenoid valve) | 1372-424 | ||||
Crankcase heater - 3/4" BSP | ||||||
57A-1 | Crankcase heater - 350 W, 110 V | 0,620 | 1 | 1 | 1 | 3181-017 |
57A-2 | Crankcase heater - 350 W, 220 V | 0,620 | 1 | 1 | 1 | 3181-014 |
57B-1 | Gasker dia. 34/27 x 1,5 | 0,002 | 1 | 1 | 1 | 2356-140 |
Crankcase heater -1 1/4" BSP | ||||||
57A-3 | Crankcase heater - 460 W, 110V | 1 | 1 | 1 | 3181-039 | |
57A-4 | Crankcase heater - 460 W, 230 V | 1 | 1 | 1 | 3181-040 | |
57A-5 | Crankcase heater - 460 W, 250 V | 1 | 1 | 1 | 3181-038 | |
57B-2 | Gasker dia.42/49 x 6,5 | 0,022 | 1 | 1 | 1 | 1349-213 |
80 | Solenoide valve blok, complete with 0,6 mm orifice for oil return, excl. coil | 2.040 | 1 | 1 | 1 or 2 | 1372-179 |
Strainer kit consist of: | 1 | 1 | 1 or 2 | 1372-089 | ||
80E | Strainer | |||||
80G | Al-gasket | |||||
Service kit consist of: | 1 | 1 | 1 or 2 | 1372-086 | ||
80P | Armature tube | |||||
80H | Armature | |||||
80K | O-ring | |||||
80M | O-ring | |||||
80L | Al-gasket | |||||
80N | Snap fastener | |||||
Seal kit consist of: | 1 | 1 | 1 or 2 | 1372-091 | ||
80G | Al-gasket | |||||
80K | O-ring | |||||
80M | O-ring | |||||
80L | Al-gasket | |||||
80Q | Al-gasket | |||||
Orifice kit 0,6 mm consist of: | 1 | 1 | 1 or 2 | 1371-034 | ||
80L | Al-gasket | |||||
80Q | Al-gasket | |||||
80I | Orifice 0,6 mm | |||||
Orifice kit 0,8 mm consist of: | 1 | 1 | 1 or 2 | 1371-035 | ||
80L | Al-gasket | |||||
80Q | Al-gasket | |||||
80I | Orifice 0,8 mm | |||||
Orifice kit 1,0 mm consist of: | 1 | 1 | 1 or 2 | 1371-036 | ||
80L | Al-gasket | |||||
80Q | Al-gasket | |||||
80I | Orifice 1,0 mm | |||||
Orifice kit 3,3 mm (for thermopump only) consist of: | 1 | 1 | 1 or 2 | 1371-037 | ||
80L | Al-gasket | |||||
80Q | Al-gasket | |||||
80I | Orifice 3,3 mm | |||||
80J-1 | Coil 220/230V, 50/60 Hz, 10 W | 0.285 | 1372-537 | |||
80J-2 | Coil 110V, 50/60 Hz, 10W | 0.285 | 1372-538 | |||
80J-3 | Coil 240V, 50 Hz, 10W | 0.285 | 1372-539 | |||
80J-4 | Coil 24V, 50 Hz, 10W | 0.285 | 1372-541 | |||
Intermediate pressure connection | ||||||
90A-1 | Welding flange | 5,280 | 1 | 2322-087 | ||
90B-1 | O-ring | 0,006 | 1 | 1331-099 | ||
90C-1 | Counter flange | 5,620 | 1 | 2344-010 | ||
90D-1 | Hexagon head screw M16 x 75 | 0,155 | 4 | 1424-108 | ||
90E-1 | Spring washer dia. 16 | 0,004 | 4 | 1437-027 | ||
90F-1 | Welding flange 160 x 160 | 3,885 | 2 | 2342-040 | ||
90G-1 | Gasket | 0,020 | 1 | 2354-106 | ||
90H-1 | Hexagon head screw M16 x 65 | 0,100 | 4 | 1424-106 | ||
90J-1 | Nut M16 | 0,030 | 4 | 1432-067 |