PRODUCTION

AND SUPPLY

+358(0) 535-77-100 info@cooltech.fi

Request callback

Heat exchangers

  • Heat exchangers
  • Heat exchangers
  • Heat exchangers
  • Heat exchangers
  • Heat exchangers
  • Heat exchangers
  • Heat exchangers
  • Heat exchangers
  • Heat exchangers
  • Heat exchangers

Heat exchangers - calculation, design and production

COOLTECH performs the calculation, manufacture and supply of the following heat exchange equipment:

Construction types:

  • shell-and-tube heat exchangers;
  • plate heat exchangers;
  • shell-and-plate heat exchangers.

Device types:

  • evaporators;
  • condensers;
  • heaters;
  • coolers.

Parameters of cooled/heated media:

  • with and without phase transitions of cooled / heated medium
  • single-component / multi-component medium;
  • operating temperature range: from – 60 to + 95 °С;
  • operating pressure range: from 0.005 to 5 MPa;
  • power range: from 5 to 5000 kW.

Combinations of cooled/heated media:

  • natural gas - refrigerant (propane, ammonia, freons);
  • multicomponent natural gas - refrigerant (propane, ammonia, freons);
  • natural gas - brines (ethylene glycol, aqueous solutions of ethylene glycol, calcium chloride, ammonia water, propylene glycol, etc.);
  • refrigerant – brines (ethylene glycol, aqueous solutions of ethylene glycol, calcium chloride, ammonia water, propylene glycol, etc.);
  • shell-and-tube oil coolers (oil-refrigerant, oil-water, oil-brine);
  • liquid food coolers (milk-water, milk-coolant, etc.);
  • biogas - refrigerant (propane, ammonia, freons).

Manufactured types of casings for shell-and-tube heat exchangers according to the TEMA standard: BEM, BXM, BKU, BXU, BJM, etc.

Questionnaire for the selection of a heat exchangers 

Production of industrial gas compressor units, compressor units, chillers, pump circulating stations, air purgers, refrigeration and freezing systems of any complexity.

 

Contacts
Aholanmäentie 88, 49630, Hamina, Vehkajoki, Finland
+358(0) 535-77-100 info@cooltech.fi