Description for compressors CMO 24-26-28 и TCMO 18 Mk2

The CMO 1 is a reciprocating compressor with several cylinders in the same block. The first digit in the type number indicates the stage of development of the compressor. The compressor comes in 4-, 6- and 8-cylinder versions, indicated by the last digit in the type number.

The TCMO 18 is a 8-cylinder version, which compresses the gas in two stages, with 6 low-pressure cylinders and 2 high-pressure cylinders. The type can be determined by the compressor’s name-plate which is located at the bottom on one side of the compressor.

You can find detailed information on our website: http://coolref.ru/EN

Spare Parts for CMO 14-16-18 TCMO 18

Spare Parts for CMO 14-16-18
TCMO18
Belonging drawing: CMO 0662-101 & 0662-104
Belonging drawing: TCMO 0662-108 & 0662-104
Pos.		Weight	Number each compr.				Part-No.
No.	Designation	each	CMO	CMO	CMO	TCMO
		in kg	14	16	18	18
	Compressor frame
1A -1	frame CMO 14	127.000	1				3111-054
1A -2	frame CMO 16	140.000		1			3111-055
1A -3	frame CMO 18	143.000			1		3111-031
1A -4	frame TCMO 18	145.000				1	3111-062
1B -1	non-return valve	0.400	1	1	1	1	2415-031
1C -1	hexagon plug C 3/4" with collar	0.065	1	1	1	1	2314-027
1D-1	gasket for plug ø34/27 x 1.5	0.002	1	1	1	1	2356-140
	Top cover without cooling
2A -1	top cover	2.960	2	3	4	4	3113-117
2B -1	gasket for top cover	0.002	2	3	4	4	2353-101
2C -1	hexagon head screw M 12 x 75	0.080	24	36	48	48	1424-061
2D -1	washer ø 24/13 x 2.5	0.006	24	36	48	48	1436-036
	Top cover with cooling
2A -2	top cover	3.040	2	3	4	4	3113-132
2B -1	gasket for top cover	0.002	2	3	4	4	2353-101
2C -1	hexagon head screw M 12 x 75	0.080	24	36	48	48	1424-061
2D -1	washer ø 24/13 x 2.5	0.006	24	36	48	48	1436-036
	Side cover with oil level glass
3A -1	side cover	6.650	1	1	1	1	3113-099
3B -1	gasket for side cover	0.002	1	1	1	1	2353-101
3C -1	hexagon head screw M 12 x 65	0.070	12	12	12	12	1424-059
3D -1	washer ø 24/13 x 2.5	0.006	12	12	12	12	1436-036
3G -1	oil level glass	0.230	1	1	1	1	1226-015
3H -1	o-ring ø 52.07 x 2.62	0.002	1	1	1	1	1331-140
3J -1	hexagon head screw M 6 x 18	0.010	4	4	4	4	1424-148
	side cover with thermo pump
	(see special parts list 0662-114)
	side cover for unloading start
	(see section 87)
	side cover with solenoid valves
	(see section 86)
	side cover with Sabroe-Matic
	(see special parts list 0662-115)
	End cover at pump
4A -1	end cover at pump (CMO)	34.500	1	1	1		3113-006
4A -2	end cover at pump (TCMO)	34.500				1	3113-112
4B -1	gasket for end cover (CMO)	0.005	1	1	1		2353-105
4B -2	gasket for end cover (TCMO)	0.005				1	2353-142
4C -1	hexagon head screw M 14 x 110	0.150	14	14	14	14	1424-087
4D -1	hexagon head screw M 14 x 120	0.165	4	4	4	4	1424-090
4E -1	washer ø 28/16 x 3	0.010	18	18	18	18	1436-037
	Bearing cover at pump
5A -1	bearing cover	8.650	1	1	1	1	3113-008
5B -1	gasket 0.3 mm	0.007	1	1	1	1	2353-107
5B -2	gasket 0.5 mm	0.010	1	1	1	1	2353-108
5B -3	gasket 0.75 mm	0.016	1	1	1	1	2353-109
5B -4	gasket 1.0 mm	0.020	1	1	1	1	2353-110
5C -1	hexagon head screw M 10 x 35	0.030	5	5	5	5	1424-193
5D -1	hexagon head screw M 10 x 50	0.040	3	3	3	3	1424-196
5E -1	main lining	0.510	1	1	1	1	2132-019
5E -2	main lining for repair (0.5 mm undersize)	0.510	1	1	1	1	2132-020
	Bearing cover at shaft seal
6A -1	bearing cover at shaft seal	9.000	1	1	1	1	3113-007
6B -1	gasket 0.5 mm	0.004	1	1	1	1	2353-106
6C -1	hexagon head screw M 10 x 35	0.030	7	7	7	7	1424-193
6E -1	main lining	0.510	1	1	1	1	2132-019
6E -2	main lining for repair (o,5 mm undersize)	0.510	1	1	1	1	2132-020
	End cover at shaft seal
7A -1	end cover	33.000	1	1	1	1	3113-005
7B -1	gasket for end cover	0.022	1	1	1	1	2353-104
7C -1	o-ring ø132.7 x 7	0.024	1	1	1	1	1331-050
7D -1	hexagon head screw M 14 x 90	0.126	14	14	14	14	1424-083
7E -1	hexagon head screw M 14 x 160	0.208	2	2	2	2	1424-095
7F -1	washer ø 28/15 x 3	0.008	16	16	16	16	1436-037
7G -1	dust strainer	0.810	1	1	1	1	3425-057
7H -1	gasket for dust strainer ø 326 x 8	0.074	1	1	1	1	2353-118
7J -1	hexagon head screw M 5 x 10	0.002	8	8	8	8	1424-140
7K -1	lock washer ø 10.5/5.3 x 0.6	0.002	8	8	8	8	1437-061
	Shaft seal cover
8A -1	shaft seal cover	3.000	1	1	1	1	3113-004
8B -1	o-ring ø 98.2 x 3.5	0.004	1	1	1	1	1331-081
8C -1	hexagon head screw M 8 x 30	0.004	5	5	5	4	1424-169
8D -1	spring washer ø 14.2/8.2 x 2	0.002	5	5	5	5	1437-023
	Delivery oil pipe (internal)
9A -1	oil pipe CMO 14	0.294	1				3141-106
9A -2	oil pipe CMO 16	0.294		1			3141-107
9A -3	oil pipe CMO 18 - TCMO 18	0.318			1	1	3141-101
9B -1	0-ring ø 18.5 x 2.62	0.003	4	4	4	4	1331-017
9C -1	thrust ring	0.004	2	2	2	2	2351-020
9D -1	0-ring for by-pass ø 7.65 x 1.78	0.001	3	3	3	3	1331-009
	Shaft seal
10 -1	shaft seal complete	0.660	1	1	1	1	3126-017
10A -1	spring retainer	0.196	1	1	1	1	3126-020
10B -1	spring	0.002	10	10	10	10	2142-050
10D -1	0-ring oil treated	0.021	1	1	1	1	3126-111
10E -1	slide ring (cast iron)	0.660	1	1	1	1	3126-018
10F -1	slide ring (special carbon)	0.070	1	1	1	1	3126-110
10G -1	0-ring ø 56.5 x 5.3	0.006	1	1	1	1	1331-037
10J -1	spirolox-ring	0.008	1	1	1	1	1437-260
10K -1	cone-ring	0.196	1	1	1	1	3126-019
10N -1	Crooved-pin ø 4 x 20	0.002	2	2	2	2	1446-081
	0il pump
11 -1	oil pump complete	4.100	1	1	1	1	3141-160
11 -B	0-ring ø 82.15 x 3.5	0.004	1	1	1	1	1331-077
11 -C	hexagon head screw 8 x 40	0.018	3	3	3	3	1424-171
11 -D	spring washer ø 14.2/8.2 x 2	0.002	3	3	3	3	1437-023
11E -1	carrier disc	0.246	1	1	1	1	2125-036
11F -1	bushing for carrier disc	0.004	2	2	2	2	2125-037
	Unloading mechanism
12 -1	unloading mechanism complete	1.538	4	6	8	4	3135-107
12A -1	socket cap screw M 5 x 20	0.004	8	12	16	8	1413-332
12B -1	spring washer	0.002	8	12	16	8	1437-061
12C -1	bottom part	0.204	4	6	8	4	3135-111
12D -1	spring guide	0.120	4	6	8	4	3135-110
12E -1	socket cap screw M 5 x 10	0.002	16	24	32	16	1413-330
12F -1	spirolox-ring	0.020	4	6	8	4	1437-265
12G -1	unloading piston	0.436	4	6	8	4	3135-109
12H -1	0-ring oil treated	0.010	4	6	8	4	2353-112
12J -1	unloading cylinder	0.682	4	6	8	4	3135-108
12K -1	0-ring oil treated	0.010	4	6	8	4	2353-111
12L -1	spring	0.002	72	108	144	72	2142-052
	Crank shaft
*)16 -1	crankshaft CMO 14 complete (ex 3121-064)	15.000	1				3121-150
*)16 -2	crankshaft CMO 16 complete (ex 3121-065)	15.100		1			3121-151
*)16 -3	crankshaft CMO 18 and TCMO 18 (ex 3121-066)	15.200			1	1	3121-152
16C -1	Key	0.034	1	1	1	1	2123-003
16D -1	plain washer with pin	0.245	1	1	1	1	2125-040
16E -1	hexagon head screw M 14 x 45	0.070	1	1	1	1	1424-242
16F -1	spring washer	0.006	1	1	1	1	1437-030
16G -1	spray ring	0.004	1	1	1	1	1437-290
16H -1	plug	0.004	3	3	3	3	1343-140
16J -1	grooved pin ø 8 x 40	0.016	2	2	2	2	1446-084
	Connecting rod
	for CMO and TCMO (LP)
17 -1	connecting rod complete with bolts	0.500	4	6	8	6	3123-009
17 -2	connecting rod complete (undersize)	0.500	4	6	8	6	3123-050
17C -1	bolts for connecting rod	0.030	8	12	16	12	2111-004
17H -1	self locking nut UNF 5/16"	0.006	8	12	16	12	1433-115
17J -1	chamfered washer ø 17/8.4 x 2	0.008	8	12	16	12	1436-034
	for TCMO (HP) needle bearing
17 -3	connecting rod complete with bolts	0.500				2	3123-070
17 -4	connecting rod complete (undersize)	0.500				2	3123-073
17C -1	bolts for connecting rod	0.030				4	2111-004
17H -1	self locking nut UNF 5/16"	0.006				4	1433-115
17J -1	chamfered washer ø 17/8.4 x 2	0.008				4	1436-034
17K -1	needle bearing					2	1511-272
	Piston
	for CMO and TCMO (LP)
18 -1	piston with pin and rings	0.212	4	6	8	6	3124-043
18A -1	piston pin	0.098	4	6	8	6	3125-083
18C -1	piston ring	0.008	4	6	8	6	3125-011
18D -1	oil scraper ring	0.010	4	6	8	6	3125-062
18E -1	circlip for bore ø 25	0.002	8	12	16	12	1437-141
	for TCMO (HP)
18 -2	piston complete with pin and rings	0.210				2	3124-055
18A -2	piston pin for needle bearing	0.090				2	3125-120
18C -1	piston ring	0.008				2	3125-011
18D -1	oil scraper ring	0.010				2	3125-062
18E -2	circlip for bore ø 22	0.002				4	1437-138
*) Approval from Classification Society specified by customer.
TCMO (HP)
If connecting rod with DX bearing is to be replaced, connecting rod,
piston, and piston pin shall also be replaced contemporarily with
parts suited for needle bearings.
Pos.		Weight	Number each compr.				Part-No.
No.	Designation	each	CMO	CMO	CMO	TCMO
		in kg	14	16	18	18
	Cylinder liner with suction valve
19 -1	cylinder liner compl.CMO-TCMO(LP)	2.215	4	6	8	6	3112-021
19 -2	cylinder liner compl. TCMO (HP)	2.240				2	3112-054
19A -1	cylinder liner	1.350	4	6	8	8	3112-055
19B -1	unloading ring with pins	0.800	4	6	8	6	3135-112
19D -1	spring for unloading ring	0.001	24	36	48	36	2142-051
19E -1	tension spring coil	0.003	4	6	8	6	2142-054
19F -1	ring plate for suction valve	0.020	4	6	8	8	3131-014
19G-1	valve spring	0.001	16	24	32	32	2141-047
19H -1	suction valve retaining plate	0.500	4	6	8	8	3132-054
19J -1	guide ring for discharge valve	0.400	4	6	8	8	3134-004
19K -1	gasket ø 112/92 x 0.5	0.001	4	6	8	8	2353-114
19L -1	socket cap screw M 5 x 35	0.006	24	36	48	48	1413-334
19M -1	0-ring ø 107.55 x 3.5	0.006	4	6	8	8	1331-085
19N -1	0-ring ø 69.5 x 2.62	0.002				2	1331-145
	Discharge valve
20 -1	discharge valve, complete	0.500	4	6	8	8	3136-038
20A -1	valve seat	0.040	4	6	8	8	3133-008
20B -1	valve retaining plate	0.350	4	6	8	8	3132-021
20C -1	ring plate for discharge valve	0.014	4	6	8	8	3131-006
20D -1	counter sunk screw M 8 x 40	0.016	4	6	8	8	1413-106
20E -1	nut M 8	0.004	8	12	16	16	1432-063
20F -1	spring guide	0.016	4	6	8	8	2145-011
20G -1	spring dowel sleeve	0.001	4	6	8	8	1446-014
20H -1	valve spring	0.001	24	36	48	48	2141-047
20K -1	guide for ring plate	0.006	4	6	8	8	3132-044
	Spring for safety head
21 -1	spring	0.170	4	6	8	8	2142-016
	Oil pressure valve
22 -1	oil pressure valve, complete	0.450	1	1	1	1	3142-150
22G -1	gasket	0.001	1	1	1	1	2354-075
22H -1	hexagon head screw Ml 2 x 75	0.040	2	2	2	2	1424-061
	Oil charging valve
	for CFC refrigerant
23 -1	oil charging valve	0.300	1	1	1	1	1374-132
23A -1	union-nut 3/4" flare	0.005	1	1	1	1	1376-012
23B -1	seal cap 1/2"	0.002	1	1	1	1	1376-042
23C -1	bushing G 3/4" x G 3/8"	0.140	1	1	1	1	2312-007
23D -1	gasket ø 34/27 x 1.5	0.001	1	1	1	1	2356-140
	for R 717
23 -2	oil charging valve	1.100	1	1	1	1	2413-005
23E -1	reducing nipple G 7/8" x G 3/4"	0.158	1	1	1	1	2311-006
23F -1	gasket ø 34/27 x 1.5	0.002	1	1	1	1	2356-140
23G -1	gasket ø 27/16 x 1.5	0.002	2	2	2	2	2356-132
23H -1	threaded plug G 7/8"	0.154	1	1	1	1	2314-021
	Safety valve
24 -1	safety valve 20 ø compl . 18 bar	1.744	1	1	1		3137-012
24 -2	safety valve 20 ø compl. 21 bar	1.750	1	1	1		3137-012
24 -3	safety valve 20 ø compl. 24 bar	1.750	1	1	1		3137-011
24 -4	safety valve 15 ø compl. 18 bar	0.670				1	3137-034
24 -5	safety valve 15 ø compl. 21 bar	0.670				1	3137-034
24 -6	safety valve 15 ø compl. 24 bar	0.670				1	2416-106
24A -1	spring for valve 20 ø 12-18 bar	0.108	1	1	1		2143-059
24A -2	spring for valve 20 ø 19-24 bar	0.110	1	1	1		2143-063
24A -4	spring for valve 15 ø 12-24 bar	0.120				1	2143-062
24B -1	0-ring for valve seat ø 34.5 x 3.5	0.002	1	1	1		1331-028
24B -4	0-ring for valve seat ø 18.5 x 2.6	0.002				1	1331-017
24C -1	0-ring for cylinder ø 44.05 x 3.5	0.006	1	1	1		1331-065
24C -4	0-ring for cylinder ø 25.07 x 2.5	0.004				1	1331-131
24D -1	0-ring for spindle ø 9.2 x 2.6	0.001	1	1	1	1	1331-011
24E -1	0-ring for cover ø 56.75 x 3.5	0.006	1	1	1		1331-069
24E -4	0-ring for cover ø 32.99 x 2.6	0.004				1	1331-133
24F -1	gasket for plug ø 34/27 x 1.5	0.002	1	1	1	1	2356-140
24G -1	hexagon head screw M 6 x 25	0.006	4	4	4		1424-153
24G -4	hexagon head screw M 4 x 16	0.002				4	1424-135
24H -1	spring washer ø 11.1/6.1 x 1.6	0.002	4	4	4		1437-022
24H -4	spring washer ø 7.1/4.1 x 0.9	0.001				4	1437-020
Pos.			Weight	Number each compr.
No.	Designation	Dim.	each	CMO	CMO	CMO	TCMO
			in kg	14	16	18	18
	Stop Valves
	Model 1983 with round top cover
25 -1	complete valve (discharge)	40 ø		1	1	1	1
25 -2	complete valve (inlet)	50 ø		1	1	1	1
25A -1	valve housing	(40 ø)		1	1	1	1
25A -2	valve housing	(50 ø)		1	1	1	1
25B -1	valve bonnet	(40-50 ø)	1.762	2	2	2	2
25C -1	front part for cone	(40-50 ø)	0.098	2	2	2	2
25D -1	rear part for cone	(40-50 ø)	0.180	2	2	2	2
25E -1	screw for valve cone	(40-50 ø)	0.054	2	2	2	2
25F -1	gasket for screw	(40-50 ø)	0.002	2	2	2	2
25G -1	threaded connection	(40-50 ø)	0.180	2	2	2	2
25H -1	sealing ring ø 62/45x3	(40-50 ø)	0.010	2	2	2	2
25J -1	0-ring for bonnet ø 75.8 x 3.5	(40-50 ø)	0.004	2	2	2	2
25K -1	spindle	(40-50 ø)	0.234	2	2	2	2
25L -1	lock washer for spindle	(40-50 ø)	0.010	2	2	2	2
25M -1	packing gland comp.with 0-ring	(40-50 ø)	0.152	2	2	2	2
25N -1	guide pin ø 5 x 10	(40-50 ø)	0.002	2	2	2	2
25P -1	0-ring ø 21 .8 x 3.5	(40-50 ø)	0.002	2	2	2	2
25Q -1	nylon washer 39.5/28 x 1.5	(40-50 ø)	0.002	2	2	2	2
25R -1	0-ring ø 17.12 x 3.5	(40-50 ø)	0.002	4	4	4	4
25S -1	hand wheel ø 120	(40-50 ø)	0.164	2	2	2	2
25T -1	screw for hand wheel	(40-50 ø)	0.002	2	2	2	2
25U -1	washer for hand wheel	(40-50 ø)	0.004	2	2	2	2
25Y -1	gasket for welding nipple	(40-50 ø)	0.008	2	2	2	2
25Z -1	screw valve/compressor M 12 x 120	(40 ø)	0.116	4	4	4	4
25Z -2	screw valve/compressor M 14 x 120	(50 ø)	0.160	4	4	4	4
25AC-1	counter flange	(40-50 ø)	1.262	2	2	2	2
25AD-1	welding nipple 40 ø		0.992	1	1	1	1
25AD-2	welding nipple 50 ø		0.856	1	1	1	1
25AD-3	welding nipple 65 ø		0.838	1	1	1	1
25AF-1	threaded plug G 3/4"	(40 0)		1	1	1	1
25AG-1	gasket valve/compressor	(40 0)	0.014	1	1	1	1
25AG-2	gasket valve/compressor	(50 0)	0.018	1	1	1	1
25AH-1	gasket for plug ø 34/27 x 1.5	(40 0)	0.008	1	1	1	1
25AJ-1	screw bonnet/valve M 10 x 25	(40-50 0)	0.024	16	16	16	16
25AK-1	screw for counterflange M 10 x 40	(40-50 0)	0.032	12	12	12	12
	Suction and oil pressure gauge
30 -1	R 12/R 22 bar and °C		0.700	1	1	1	1
30 -2	R 502 bar and °C		0.700	1	1	1	1
30 -3	R717		0.700	1	1	1	1
Pos.		Weight	Number each compr.	Part-No.
No.	Designation	each	CMO	CMO	CMO	TCMO
		in kg	14	16	18	18
	Discharge pressure gauge
31 -1	R 12/R 22 bar and °C	0.700	1	1	1		1541-191
31 -2	R 12/R 22 bar and °C	0.700				1	1541-278
31 -3	R 502 bar and °C	0.700	1	1	1		1541-364
31 -4	R 502 bar and °C	0.700				1	1541-366
31 -5	R 717 bar and °C	0.700	1	1	1		1541-050
31 -6	R 717 bar and °C	0.700				1	1541-103
	Bracket for gauge
39 -1	bracket	1.000	1	1	1	1	3146-015
39A -1	hexagon head screw M 5 x 10	0.002	4	4	4	4	1424-140
39B -1	spring washer 5 mn	0.002	4	4	4	4	1437-061
	Parts for instruments
41A -1	gasket ø 19/14 x 1.5	0.001	6	6	6	8	2356-124
41B -1	connecting piece (2 pipes)	0.025	2	2	2	2	2333-012
41C -1	plug for connecting piece	0.040	3	3	3	4	2314-048
41D -1	union nut (R 12 - R 22 - R 502)	0.003	5	5	5	6	1376-010
41E -1	union nut M 10 x 0.75 (R 717)	0.010	5	5	5	6	1349-011
41F -1	gasket ø 9/3x1 (R 717)	0.001	5	5	5	6	2356-117
41H -1	gasket ø 14.5/6 x 1,5	0.001	2	2	2	2	2356-120
41J -1	connecting piece (1 pipe)	0.015				1	2333-014
41Q -1	pipe holder	0.004	1	1	1	1	1377-096
41R -1	cylinder head screw M 4 x 6	0.002	1	1	1	1	1412-200
41T -1	pipe section with flare	0.006	7	7	7	7	2333-016
41U -1	connection piece (3 pipes)	0.017	1	1	1	1	2333-013
	Parts for mounting pressure control
44A -1	bracket for pressure controls	0.600	1	1	1	1	2213-125
44B -1	cylinderhead screw M 4 x 6	0.002	6	6	6	6	1412-200
44C -1	counter sunk screw M 6 x 12	0.020	2	2	2	2	1413-090
44D -1	spring washer ø 7.1/4 x 1	0.002	6	6	6	6	1437-020
	Pressure and temperature controls
	for R 12 - R 22 - R 502
45A -1	pressure control KP 1	0.326	1	1	1	1	1373-103
45B -1	pressure control KP 15	0.532	1	1	1	1	1373-135
45C -2	differential pressure control MP 55	0.864	1	1	1	1	1373-159
45D -1	pressure control KP 5	0.330	1	1	1	1	1373-123
45H -1	temperature control KP 77	0.466				1	1373-044
	for R 717
45B -1	pressure control KP 15 A	0.754	1	1	1	1	1373-142
45C -1	differential pressure control MP 55A	0.978	1	1	1	1	1373-162
45C -1	temperature control KP 98	0.674	1	1	1		1373-043
45H -1	temperature control KP 77	0.466				1	1373-044
45L -1	phil pocket for temperature control	0.162	1	1	1	2	1377-171
	Coupling
	(Metalastic)
48A -1	metalastic coupling type 21/544	3.600	1	1	1	1	1524-024
48B -1	bolt	0.280	4	4	4	4	2111-055
48C -1	plain washer 5/8"	0.005	4	4	4	4	1436-038
48D -1	self locking nut UNF 5/8"	0.050	4	4	4	4	1433-118
	(AMR 225)
48A -2	disc pack	0.282	2	2	2	2	1524-155
48B -2	bolt	0.054	16	16	16	16	1524-163
48C -2	bevel washer	0.004	16	16	16	16	1524-179
48D -2	lock nut	0.006	16	16	16	16	1524-171
	Crankcase heater
57A -1	crankcase heater 110V - 225W	0.674	1	1	1	1	3181-019
57A -2	crankcase heater 220V - 225W	0.672	1	1	1	1	3181-016
57B -1	gasket ø 34/27 x 1.5	0.002	1	1	1	1	2356-140
	Bracket for oil filter
59 -1	bracket for oil filter complete	1.698	1	1	1	1	3421-008
59A -1	plate	1.360	1	1	1	1	3421-009
59B -1	pipe	0.254	1	1	1	1	3421-010
59C -1	locking strap	0.014	2	2	2	2	3421-011
59D -1	spring strap	0.050	1	1	1	1	3421-013
59E -1	circlip for shaft ø 38 DIN 471	0.006	1	1	1	1	1437-213
59G -1	spring-ring	0.002	1	1	1	1	3421-014
59H -1	0-ring ø 29.75 x 3.5	0.002	1	1	1	1	1331-025
59J -1	hexagon head screw M 6 x 16	0.004	2	2	2	2	1424-151
S9K -1	spring washer ø 6 nun	0.004	2	2	2	2	1437-022
59L -1	pointed screw M 10 x 60	0.028	2	2	2	2	1413-258
	Oil filter
60 -1	oil filter complete	2.870	1	1	1	1	4524-009
60A -1	outer plate	0.340	1	1	1	1	3422-056
60B -1	inner plate	0.275	1	1	1	1	3422-057
60C -1	bottom	0.215	1	1	1	1	3422-058
60D -1	outer guard	0.700	1	1	1	1	3424-027
60E -1	inner guard	0.340	1	1	1	1	3424-028
60F -1	outer strainer	0.180	1	1	1	1	3425-055
60G -1	inner strainer	0.120	1	1	1	1	3425-056
60H -1	suction connection	0.055	1	1	1	1	3424-032
60 J -1	pipe nipple	0.050	1	1	1	1	3424-031
60K -1	distance pipe	0.020	1	1	1	1	3424-034
60L -1	support	0.170	1	1	1	1	3424-029
	oil filter continued:
60M -1	lock piece	0.045	1	1	1	1	3421-012
60N -1	rubber gasket 85 x 33 x 2	0.006	1	1	1	1	2353-116
60P -1	rubber gasket ø 93/73 x 2	0.008	1	1	1	1	1334-036
60Q -1	rubber gasket ø 82/66 x 2	0.006	1	1	1	1	1334-028
60R -1	magnet filter	0.130	1	1	1	1	3425-037
60S -1	filter cartridge	0.110	1	1	1	1	1517-060
60T -1	counter sunk screw M 6 x 45	0.008	2	2	2	2	1413-098
60U -1	hexagon head screw M 6 x 45	0.010	1	1	1	1	1424-157
60V -1	nut M 6	0.004	1	1	1	1	1432-061
60X -1	lock washer	0.002	3	3	3	3	1437-063
60Y -1	self-cutting screw 3/8 No 10	0.002	2	2	2	2	1414-170
60Z -1	nut M 10	0.008	3	3	3	3	1432-039
60AA-1	rubber gasket ø 30/13 x 8	0.006	2	2	2	2	2353-115
60AB-1	0-ring ø 7.65 x 1.78	0.005	3	3	3	3	1331-009
60AC-1	0-ring ø 25 x 3.5	0.012	1	1	1	1	1331-022
60AD-1	rubber gasket ø 102/84 x 2	0.008	1	1	1	1	1334-037
	oil pioes for unloading mechanism
	CMO 14
62A -1	pipe with nipple and connecting piece	0.200	1				3135-145
62B -1	pipe with nipple and connecting piece	0.138	1				3135-146
	CMO 16
62A -2	pipe with nipple and connecting piece	0.114		1			3135-136
62B -2	pipe with nipple and connecting piece	0.126		1			3135-135
62C -2	pipe with nipple and connecting piece	0.134		1			3135-131
	CMO 18
62A -3	pipe with nipple and connecting piece	0.108			1		3135-115
62B -3	pipe with nipple and connecting piece	0.126			1		3135-116
62C -3	pipe with nipple and connecting piece	0.090			1		3135-114
62D -3	pipe with nipple and connecting piece	0.140			1		3135-117
	TCMO 18
62A -4	pipe with nipple and connecting piece	0.108				1	3135-115
62B -4	pipe with nipple and connecting piece	0.120				1	3135-144
62E -4	plug	0.024				1	3135-126
	Joint pieces for oil pipes
62F -1	spirolox ring RS 50	0.002	4	4	4	4	1437-275
62G -1	0-ring ø 7.65 x 1.78	0.001	4	6	8	4	1331-009
62H -1	0-ring ø 9.25 x 1.78	0.001	4	4	4	4	1331-010
	Oil separator CMO (R 22 - R 502)
65 -1	oil separator, complete		1	1	1		4241-010
65A -1	gasket valve/separator ø 100/62 x 1.5	0.014	1	1	1		2356-212
65B -1	gasket separator/compressor ø 100/62 x 1.5	0.014	1	1	1		2356-212
65C -1	hexagon head screw M 12 x 40	0.045	4	4	4		1424-217
65D -1	cover	0.625	1	1	1		3411-007
65E -1	0-ring for cover ø 82.15 x 3.5	0.004	1	1	1		1331-077
65F -1	hexagon head screw M 8 x 15	0.010	8	8	8		1424-166
65G -1	float valve unit	0.200	1	1	1		1374-505
65H -1	distance ring	0.002	1	1	1		2212-036
65J -1	socket head screw M 5 x 35	0.006	2	2	2		1413-334
65K -1	Union 1/4"	0.016	1	1	1		1376-010
65L -1	pipe section with flare	0.080	1	1	1		2322-016
65M -1	connecting piece (1 pipe)	0.020	1	1	1		2333-014
65N -1	plug for connecting piece	0.026	1	1	1		2314-048
65P -1	gasket for plug ø 19/14 x 1.5	0.002	2	2	2		2356-140
	Oil separator CMO R 717
65 -2	oil separator, complete		1	1	1		4241-070
65A -2	oil separator 2107 D		1	1	1		4241-151
65B -2	oil strainer	0.270	1	1	1		3425-077
65C -2	gasket for cover	0.020	1	1	1		2355-108
65D -2	cover	2.400	1	1	1		3254-069
65E -2	hexagon head screw M 12 x 35	0.040	6	6	6		1424-216
65F -2	gasket ø 18/10 x 1.5	0.006	3	3	3		2356-123
65G -2	threaded reducing socket G 1/4" - G 1/2"	0.055	1	1	1		1349-077
65H -2	angel swivel screw joint G 1/4" for OD 10 mm>	0.100	1	1	1		1349-089
65J -2	orifice d = 0.4 mm	0.002	1	1	1		3142-033
65K -2	Union nut G 1/2" ø 14 mm	0.100	1	1	1		2313-005
65L -2	threaded nipple 1/2" x 14	0.040	1	1	1		2314-005
65M -2	straight screw-in joint 1/4" NPT	0.046	1	1	1		1349-060
65N -2	solenoid valve 220 V 50/60 Hz 9W	0.625	1	1	1		1372-426
65P -2	straight screw-in joint G 1/4"	0.055	1	1	1		1349-055
65Q -2	connecting piece for 1 pipe 6 mm	0.025	1	1	1		2333-020
65R -2	plug for connecting piece	0.025	1	1	1		2314-048
65S -2	gasket ø 19/14 x 1.5	0.004	2	2	2		2356-124
65T -2	stop valves type SW 40		1	1	1		2411-147
	Oil separator TCMO (R 717 - R 22 - R 502
65 -3	oil separator complete					1	187-125
65A -3	gasket valve/separator ø 100/62 x 1.5	0.014				1	2353-212
65B -3	gasket separator/compressor ø 100/62 x 1.5	0.014				1	2356-212
65C -3	hexagon head screw M 12 x 40	0.046				4	1424-217
65D -3	oil separator OVUR 1404					1	4241-103
65E -3	oil strainer	0.270				1	3425-077
65F -3	cover					1	3254-066
65G -3	gasket for cover ø 139/94 x 1.5	0.020				1	2355-108
65H -3	hexagon head screw M 12 x 30	0.032				6	1424-215
65J -3	valve body	0.156				1	3414-016
65K -3	nozzle	0,001				1	1377-355
65L -3	needle	0,002				1	1377-354
65M -3	clamp	0,006				1	2212-052
65N -3	nozzle holder	0,004				1	3413-033
65P -3	distance ring	0,009				2	2124-025
65Q -3	shaft	0,004				1	2121-012
65R -3	shaft	0,002				1	1526-060
65S -3	spring	0,004				1	1523-065
65T -3	washer ø 7.3/4.3 x 0.5	0,002				2	1377-357
65U -3	0-ring	0,002				1	1331-235
65V -3	gasket	0,001				1	2354-094
65X -3	socket cap screw M 5 x 40	0,006				2	1413-335
65Y -3	threaded plug	0,028				1	2314-010
65Z -3	gasket	0,002				1	2356-206
65AA-3	spacing washer	0,004				2	1377-356
	External suction filter
	only delivered on demand.
66A -1	end cover	2.250	1	1	1	1	3422-003
66B -1	gasket for end cover 130 x 130 x 1	0.020	1	1	1	1	2354-030
66C -1	hexagon head screw M 12 x 45	0.050	4	4	4	4	1424-218
66D -1	spring	0.040	1	1	1	1	2143-006
66E -1	dust strainer	0.370	1	1	1	1	3425-059
66F -1	filter bag	0.030	1	1	1	1	3425-060
66G -1	spring insert	0.060	1	1	1	1	3424-007
66H -1	gasket against valve and compressor	0.020	1	1	1	1	2356-213
66J -1	hexagon head screw M 14 x 45	0.070	4	4	4	4	1424-242
	Injection system for TCMO
83A -1	guard	0.968				1	3116-035
83B -1	nipple	0.156				1	3116-041
83C -1	0-ring ø 25 x 3.5 for 83 B	0.012				1	1331-022
83D -1	0-ring ø 20.2 x 3.5 for 83 B	0.009				1	1331-019
83E -1	socket cap screw M 6 x 16	0.006				2	1413-340
83F -1	spring washer 11.1/6.1 x 1.6	0.004				2	1437-022
83G -1	stop valve ND 20 with oval flange	1.800				1	2412-011
83H -1	gasket for stop valve ø 44/33 x 1.5	0.002				1	2356-039
83J -1	hexagon head screw M 12 x 40	0.045				2	1424-217
83K -1	stop valve SG 6	0.540				1	2413-123
83L -1	gasket for valve ø 18/10 x 1.5	0.006				2	2356-123
83M -1	filter complete					1	4522-007
83N -1	solenoid valve 220 V, 50 Hz, 16.5 W	0.688				1	1372-046
83P -1	injection valve TEAT 20-5 (R 22)	2.460				1	1371-242
83P -2	injection valve TEAT 20-2 (R 717)	2.460				1	1371-240
	Spec. spring for 83P-2	0.018				1	1523-070
83Q -1	solenoid valve for bypass	0.822				1	1372-047
83R -1	non-return valve for discharge pipe	2.958				1	1372-249
	Side cover with ASCO solenoid
	valves for capacity control
	belonging drawing 0662-117
86A -1	side cover with oil level glass	10.760	1	1	1	1	3113-134
86B -1	gasket for side cover	0.014	1	1	1	1	2353-102
86C -1	hexagon head screw M 12 x 65	0.070	10	10	10	10	1424-059
86D -1	hexagon head screw M 12 x 75	0.078	2	2	2	2	1424-061
86E -1	oil level glass	0.230	1	1	1	1	1226-015
86F -1	0-ring for oil level glass ø 52.07 x 2.62	0.002	1	1	1	1	1331-140
86G -1	hexagon head screw M 6 x 18	0.006	4	4	4	4	1424-149
86H -1	valve body with 3 complete valve	5.524	1	1	1	1	3143-189
86 J -1	gasket for valve body	0.010	1	1	1	1	2353-150
86K -1	hexagon head screw M 8 x 70	0.030	4	4	4	4	1424-042
86L -1	0-rings for one solenoid valve (4 pieces)	0.002	3	3	3	3	3143-212
86M -1	coil for solenoid valve 220 V, 50 Hz	0.172	3	3	3	3	1372-105
86M -2	coil for solenoid valve 120 V, 60 Hz	0.190	3	3	3	3	1372-104
86N -1	washer ø 24/13 x 2.5	0.006	12	12	12	12	1436-036
	Side cover for unloaded start
87A -1	side cover with oil level glass	10.760	1	1	1	1	3113-134
87B -1	gasket for side cover	0.014	1	1	1	1	2353-102
87C -1	hexagon head screw M 12 x 65	0.070	10	10	10	10	1424-059
87D -1	hexagon head screw M 12 x 75	0.078	2	2	2	2	1424-061
87G -1	oil level glass	0.230	1	1	1	1	1226-015
87H -1	0-ring for oil level glass ø 52.07 x 2.62	0.002	1	1	1	1	1331-140
87J -1	hexagon head screw M 6 x 18	0.006	4	4	4	4	1424-149
87K -1	cover for unloaded start	0.805	1	1	1	1	3143-187
87L -1	gasket for cover	0.008	1	1	1	1	2353-149
87M -1	hexagon head screw M 8 x 35	0.016	4	4	4	4	1424-170
87N -1	washer ø 24/13 x 2.5	0.006	12	12	12	12	1436-036

Spare parts for CMO 24-26-28 & TCMO 28

Spare parts for CMO 24-26-28 & TCMO 28
			CMO 24-28		TCMO 28
Drawings for the compressor			0662-213		0662-214/217
Cylinder liner			0662-212
Pos.	Designation	Weight each in kg	Number each compressor				Part no.
			CMO 24	CMO 26	CMO 28	TCMO 28
	Compressor frame
1A-1	Frame CMO 24		1				3111-076
1A-2	Frame CMO 26			1			3111-077
1A-3	Frame CMO 28				1		3111-078
1A-4	Frame TCMO 28, int. IP connection					1	3111-079
1A-4	Frame TCMO 28, ext. IP connection					1	3111-088
1B-1	Non return valve	0.400	1	1	1	1	2415-031
1C-1	Hexagon plug G 3/4" with collar	0.065	1	1	1	1	2314-027
1D-1	Gasket for plug dia. 34/27 x 1,5	0.002	1	1	1	1	2356-140
1E-1	Hexagon plug with collar G 1/2"	0.128	1	1	1	1	2314-026
1F-1	Gasket for plug dia. 27/21 x 1,5	0.008	1	1	1	1	2356-133
	Top cover - air cooled
2A-1	Top cover	2.960	2	3	4	4	3113-198
2B-1	Gasket for top cover	0.012	2	3	4	4	2353-190
2C-1	Hexagon head M12 x 70	0.080	24	36	48	48	1424-061
2D-1	Washer dia. 24/13x2,5	0.006	24	36	48	48	1436-036
	Top cover - water cooled  (see sketch below)
2A-1	Top cover		2	3	4	4	3113-198
2B-1	Gasket for top cover	0.012	2	3	4	4	2353-101
2C-3	Hexagon head screw M12 x 90	0.092	24	36	48	48	1424-064
2D-3	Washer dia. 24/13x2,5	0.006	24	36	48	48	1436-036
2K-3	Water cover		2	3	4	4	3113-166
2L-3	Gasket for water cover	0.012	2	3	4	4	2353-172
2M-3	Hexagon head screw M8 x 30	0.014	4	6	8	8	1424-169
2N-3	Chamfered washer dia, 17/8,4 x 1,6	0.002	4	6	8	8	1436-034
2P-3	Rubber cord dia. 10 x 220	0.015	2	3	4	4	1323-077
	Side cover with oil level glass
3A-1	Side cover - air cooled	6.830	1	1	1	1	3113-099
3B-1	Gasket for side cover	0.012	1	1	1	1	2353-190
3C-1	Hexagon head screw M12 x 65	0.070	12	12	12	12	1424-059
3D-1	Washer dia. 24/13x2,5	0.006	12	12	12	12	1436-036
3G-1	Oil level glass	0.220	1	1	1	1	1226-015
3H-1	O-ring dia. 52,07x2,62	0.002	1	1	1	1	1331-140
3J-1	Hexagon head screw M6 x 18	0.004	4	4	4	4	1424-148
	Side cover - water cooled
3A-2	Side cover		1	1	1	1	3113-167
3B-2	Gasket for side cover	0.012	1	1	1	1	2353-172
3C-2	Hexagon head screw M12 x 50	0.052	12	12	12	12	1424-219
3D-2	Washer for dia. 24/13 x 2,5	0.006	12	12	12	12	1436-036
3K-2	Water cover		1	1	1	1	3113-166
3L-2	Gasket for water cover		1	1	1	1	2353-172
3M-2	Hexagon head screw MS x 25	0.014	2	2	2	2	1424-168
3N-2	Washer for M8	0.002	2	2	2	2	1436-034
3P-2	Rubber cord dia. 10 x 220	0.015	1	1	1	1	1323-077
	End cover at pump
4A-1	End cover at pump - CMO	34.500	1	1	1		3113-006
4A-2	End cover at pump - TCMO int. IP	34.500				1	3113-112
4A-2	End cover at pump - TCMO ext- iP	34.500				1	3113-214
4B-1	Gasket for end cover - CMO	0.050	1	1	1		2353-105
4B-2	Gasket for end cover - TCMO int. JP	0.056				1	2353-142
48-2	Gasket for end cover - TCMO ext. IP	0.056				1	2353-182
4C-1	Hexagon head screw M14 x 110	0.148	14	14	14	14	1424-087
4D-1	Hexagon head screw M14 x 120	0.160	2	2	2	2	1424-090
4E-1	Washer dia. 23/16x3	0.008	18	18	18	18	1436-037
	Bearing cover al pump
5A-1	Bearing cover		1	1	1	1	3113-168
5B-1	Gasket 0,3 mm	0.007	1	1	1	1	2353-166
5B-2	Gasket 0,5 mm	0.010	1	1	1	1	2353-167
5B-3	Gasket 0,8 mm	0.016	1	1	1	1	2353-168
5B-4	Gasket 1,0 mm	0.020	1	1	1	1	2353-169
5C-1	Hexagon head screw M10x40	0.032	8	8	8	8	1424-194
5E-1	Main bearing bushing		1	1	1	1	2132-086
5E-2	Main bearing bushing for repair -0,5 mm undersize		1	1	1	1	2132-088
	Bearing cover at shaft end
6A-1	Bearing cover at shaft end		1	1	1	1	3113-169
6B-1	Gasket 0,5 mm	0.010	1	1	1	1	2353-167
6C-1	Hexagon head screw M10x35	0.030	7	7	7	7	1424-193
6D-1	Haxagon head screw M10x50		1	1	1	1	1424-196
6E-1	Main bushing		1	1	1	1	2132-086
6E-2	Main bushing for repair -0,5 mm undersize		1	1	1	1	2132-088
	End cover al shaft end
7A-1	End cover		1	1	1	1	3113-172
7B-1	Gasket for end cover	0.022	1	1	1	1	2353-104
7C-1	O-ring dia. 132,7x 7	0.024	1	1	1	1	1331-050
7D-1	Hexagon head screw M14 x 90	0.126	14	14	14	14	1424-083
7E-1	Hexagon head screw M14 x 160	0.208	2	2	2	2	1424-095
7F-1	Was her dia. 28/15x3	0.008	16	16	16	16	1436-037
7G-1	Dust strainer	0.818	1	1	1	1	3425-057
7H-1	Gasket for dust strainer dia. 326 x 8	0.074	1	1	1	1	2353-118
7J-1	Hexagon head screw M5 x 10	0.002	8	8	8	8	1424-140
7K-1	Lock washer dia. 10,5/5,3 x 0,6	0.002	8	8	8	8	1437-061
	Delivery oil pipe - internal
9A-1	Oil pipe CMO 24	0.294	1				3141-148
9A-2	Oil pipe CMO 26	0.300		1			3141-149
9A-3	Oil pipe CMO/TCMO 28	0.310			1	1	3141-150
9B-1	O-ring dia. 13,5x2,62	0.003	4	4	4	4	1331-017
9C-1	Thrust ring	0.004	2	2	2	2	2353-020
	Shaft seal type SB CMO
	Spare parts kit:		1	1	1	1	3126-165-3
	Consist of:
10A-1	Slide ring, steel		1	1	1		3126-162
10B-1	Slide ring, carbon		1	1	1	1	3126-158
10C-1	O-ring dia.53.57x 3,53	0.002	1	1	1	1	1331-068
10D-1	O-ring dia. 63,09 x 3,53	0.004	1	1	1	1	1331-071
10G-1	Hex. socket screw M5 x 16	0.004	4	4	4	4	1413-331
	Allen key NV-4x90x90		1	1	1	1	1612-392
	Mounting instruction						0171-949
	Shaft seal complete for CMO/TCMO		1	1	1	1	3126-180
	Consist of:
8A-1	Cover for shaft seal		1	1	1	1	3113-170
8B-1	O-ring dia. 98,02 x 3.53		1	1	1	1	1331-081
8C-1	Hex. head screw M8 x 30		5	5	5	5	1424-169
8D-1	Spring washer dia. 14,2 /8,2 x 2		5	5	5	5	1437-023
8E-1	Locking ring		1	1	1	1	3126-164
8F-1	Cylindrical pin		1	1	1	1	1446-081
10A-1	Slide ring, steel		1	1	1	1	3126-162
10B-1	SIrde ring, carbon		1	1	1	1	3126-158
10C-1	O-ring dia. 53,57 x 3,53		1	1	1	1	1331-068
10D-1	O-ring dia. 63,09x3,53		1	1	1	1	1331-071
10F-1	Retaining flange		1	1	1	1	3126-161
10G-1	hex. socket screw M5 x 16		4	4	4	4	1413-331
10H-1	Locking ring		1	1	1	1	3126-163
10K-1	Spring - DC5 x 32 x dia. 1		8	8	8	8	2142-058
	OS pump
11-1	Oil pump complete *)		1	1	1	1	3141-154
11A-1	Gasket pump housing/cover		1	1	1	1	2353-170
11B-1	Socket cap screw M8 x 60	0.018	4	4	4	4	1413-364
11C-1	Pump housing		1	1	1	1
11D-1	Cover for pump		1	1	1	1
11E-1	O-ring dia. 75,8 x 3,5	0.004	1	1	1	1	1331-075
11F-1	Socket cap screw M6 x 16	0.006	4	4	4	4	1413-340
11G-1	Cylindrical pin dia. 6 x 36		2	2	2	2	1445-061
11J-1	Gear wheel		1	1	1	1
11K-1	Gear wneei		1	1	1	1
11L-1	Grooved pin dia. 6 x 24 DIN 1475		1	1	1	1	1446-032
11M-1	Dog clutch		1	1	1	1	2125-298
11N-1	Bushing for dog clutch - nylon		2	2	2	2	2132-087
	Unloading mechanism
12-1	Unloading mechanism complete		4	4	8	4	3135-172
12A-1	Socket cap screw M5 x 20	0.004	8	12	16	8	1413-332
12B-1	Spring washer	0.002	8	12	13	8	1437-061
12C-1	Bottom part		4	6	8	4	3135-163
12D-1	Unloading piston		4	6	8	4	3135-169
12E-1	Unloading cylinder		4	6	8	4	3135-170
12F-1	Spring		64	84	128	64	2142-052
12G-1	Sealing ring		4	6	8	4	1332-113
12H-1	Sealing ring		4	6	8	4	1332-114
12J-1	Locking ring		4	6	8	4	3135-171
*) If the oil pump is faulty, the entire pump must be replaced
	Crank shaft
16-1	Crank shaft CMO 24 complete		1				3121-195
16-2	Crank shaft CMO 26 complete			1			3121-196
16-3	Crank shaft CMO/TCMO 28				1	1	3121-197
16C-1	Key 14 x 9 x 40	0.034	1	1	1	1	2123-003
16D-1	Pjainwasher	0.245	1	1	1	1	2125-040
16E-1	Hexagon head screw M14 x 40	0.070	1	1	1	1	1424-141
16F-1	Spring washer dia. 23/14x3	0.006	1	1	1	1	1437-030
16G-1	Spray ring	0.004	1	1	1	1	1437-290
16H-1	Plug	0.002	3	3	3	3	1413-250
16J-1	Grooved pin DIN 1474	0.015	2	2	2	2	1446-031
	Connecting rod -for CMO and TCMO LP
17-1	Connecting rod complete with bolts		4	6	8	6	3123-076
17-2	Connecting rod complete undersize		4	6	8	6	3123-078
17C-1	Bolt for connecting rod	0.030	8	12	16	12	2111-004
17H-1	Self locking nut UNF 5/16"	0.006	8	12	16	12	1433-115
17J-1	Chamfered washer dia. 17/8,4 x 1,6	0.008	8	12	16	12	1436-034
	Connecting rod -for TCMO HP needle bearing
17-3	Connecting rod complete wrth bolts					2	3123-077
17-4	Connectino rod complete undersize					2	3123-079
17C-1	Bolts for connection rod	0.030				4	2111-004
17H-1	Self locking nut UNF 5/16"	0.006				4	1433-115
17J-1	Chamfered washer dia. 17/8,4 x 1,6	0.008				4	1436-034
17K-1	Needle bearing					2	1511-272
	Piston
18-1	Piston with pin and rings		4	6	8	8	3124-062
18A-1	Piston pin		4	6	8	8	3125-122
18C-1	Piston ring		4	6	8	8	3125-129
18D-1	Oil scraper ring		4	6	8	8	3125-124
18E-1	Circlip for bore dia. 22		8	12	16	16	1437-138
	Cylinder liner with suction valve - See drawing 0662-212
19-1	Cylinder liner complete - CMO and TCMO LP-  R717 for capacity regulation		4	6	3	4	3112-077
19-2	Cylinder liner complete- TCMO LP/HP- R717 without capacity regulation					4	3112-079
19-4	Cylinder liner complete- CMO and TCMO LP-  HFC for capacity regulation		4	6	8	4	3112-076
19-5	Cylinder liner complete- TCMO LP/HP-HFC/HCFC without capacity regulation					4	3112-078
19A-1	Cylinder liners LP/HP -R717/HFC/HCFC		4	6	8	8	3112-075
19B-1	Unloading pin		24	36	48	36	2122-023
19C-1	Spring for unfoadng pin		24	36	48	36	2142-034
19F-1	Ring plate for suction valve		4	6	8	8	3131-072
19G-1	Valve spring		16	24	32	32	2141-047
19H-1	Suction valve retaining plate R717		4	6	8	8	3132-075
19H-2	Suction valve retaining plate HFC		4	6	8	8	3132-073
19J-1	Socket cap screw M5 x 25		24	36	48	48	1413-333
19K-1	Gasket 0,5 mm		4	6	8	8	2356-288
19K-2	Gasket 0.8 mm		4	6	8	8	2356-289
19M-1	O-ring dia. 72,69 x 2,62					2	1331-147
	Discharge valve
20-1	Discharge valve complete R717		4	6	8	8	3136-080
20-2	Discharge valve complete HFC/HCFC		4	6	8	8	3136-079
20A-1	Valve seat		4	6	8	8	3133-008
20B-1	Valve retaining plate R717		4	6	8	8	3132-074
20B-2	Valve retaining plate HFC/HCFC		4	6	8	8	3132-072
20C-1	Ring plate for discharge valve		4	6	8	8	3131-006
20D-1	Counter sunk screw M8 x 40		4	6	8	8	1413-106
20E-1	Nut M8		8	12	16	16	1432-063
20F-1	Spring guide		4	6	8	8	2145-011
20H-1	Valve spring		24	36	48	48	2141-047
20J-1	Spring washer		4	6	8	8	1437-054
	Spring for safety head
21	Spring		4	5	8	8	2142-059
	Oil pressure valve
21-1	Oil pressure valve - complete	0.450	1	1	1	1	3142-150
22A-1	Gasket	0.001	1	1	1	1	2354-075
	Oil charging valve for HFC/HCFC refrigerant
23-1	Oil charging valve	0.300	1	1	1	1	1374-132
23A-1	Union nut 3/4" flare	0.005	1	1	1	1	1376-012
23B-1	Seal cap 1/2"	0.002	1	1	1	1	1376-042
23C-1	Bushing G 3/4" x G 3/8"	0.140	1	1	1	1	2312-007
23D-1	Gasket dia. 34/27x1,5	0.001	1	1	1	1	2356-140
	for B717 refrigerant
23A-2	Oil charging valve - complete	0.300	1	1	1	1	2412-585
23B-2	Threaded reducing nipple	0.155	1	1	1	1	2311-059
23C-2	Socket	0.075	1	1	1	1	2313-035
23D-2	Gasket	0.001	1	1	1	1	2356-123
23E-2	Gasket	0.001	1	1	1	1	2356-140
23F-2	Gasket	0.001	1	1	1	1	2356-283
23G-2	Nut	0.060	1	1	1	1	2313-027
	By-pass valve
24-1	By-pass valve dia. 20 24 bar	2.400	1	1	1		3137-011
24-2	By-pass valve dia. 20 22 bar	2.400	1	1	1		3137-012
24-3	By-pass valve dia. 10 24 bar	0.850				1	3137-013
24-4	By-pass valve dia. 10 22 bar	0.850				1	3137-034
24C-1	O-ring for cylinder dia. 44.05 x 3,5	0.006	1	1	1		1331-065
24C-4	O-ring for cylinder dia. 25,07 x 2,5	0.004				1	1331-131
24E-1	O-ring for cover dia. 56,75 x 3,5	0.006	1	1	1		1331-069
24 E-4	O-ring for cover dia. 32,99 x 2,6	0.004				1	1331-133
24G-1	Hexagon head screw M6 x 25	0.006	5	5	5		1424-153
24G-4	Hexagon head screw M4 x 16	0.002				5	1424-135
24H-1	Spring washer dia. 11,1/6,1 x 1,6	0.002	5	5	5		1437-022
24H-4	Spring washer dia. 7,1/4,1 x0,9	0.001				5	1437-020
Pos.	Designation	Valve dim.  dia.	Weight each in kg		Number each valve		Part no.
	Slop valve
25-1	Complete valve - discharge	40			1		2414-066
25-2	complete valve - suctron	50			1		2414-067
25A-1	Valve housing	40			1		2432-156
25A-2	Valve housing	50			1		2432-157
25B-1	Valve bonnet	40-50	1.760		1		2433-028
25C-1	Front part tor cone	40-50	0.098		1		2444-090
25D-1	Rear part for cone	40-50	0.180		1		2444-091
25E-1	Screw for cone	40-50	0.054		1		2444-017
25F-1	Gasket for scraw	40-50	0.002		1		2356-138
25G-1	Threaded connection	40-50	0.180		1		2445-053
25H-1	Sealing ring dia. 62/45 x 3	40-50	0.010		1		2354-003
25J-1	O-ring for bonnet dia. 72,4 x 5,3	40-50	0.010		1		1331-154
25K-1	Spindle	40-50	0.234		1		2442-023
25L-1	Lock washer	40-50	0.010		1		2445-019
25M-1	Packing gland complete with o-rings	40-50	0.152		1		2452-132
25N-1	Guide pin dia.Sx 10	40-50	0.002		1		1446-085
25P-1	O-ring dia. 21,8x3,5	40-50	0.002		1		1331-020
25Q-1	Nylon washer dia. 39,5/28 x 1,5	40-50	0.002		1		2354-018
25R-1	O-ring dia. 17,12x3,5	40-50	0.002		2		1331-016
25S-1	Hand wheel d]a. 120	40-50	0.164		1		1365-036
25T-1	Screw ior hand wheel	40-50	0.002		1		1424-140
25U-1	Washer for hand wheel	40-50	0.004		1		1436-024
25Y-1	Gasket for welding nipple	40-50	0.008		1		2356-087
25Z-1	Screw valve/corn pres&or Ml 2 it 130	40	0.116		4		1424-072
25Z-2	Screw valve/compressor M14 x 130	50	0.160		4		1424-091
25AC-1	Counter flange	40-50	1.162		6		2344-091
25AD-1	Welding nipple dia. 40		0.992		6		2322-100
25AD-2	Welding nipple dia. 50		0.856		6		2322-102
25AD-3	Welding nipple dia. 65		0.838		6		2322-103
25AG-1	Gasket valve/compressor	40	0.014		6		2356-212
25AG-2	Gasket valve/compressor	50	0.018		6		2356-213
25AJ-1	Screw bonnet/valve Ml 0 x 25	40-50	0.024		8		1424-191
25AK-1	Screw tor counter flange M10 x 40	40-50	0.032		6		1424-194
Pos.	Designation	Weight each in kg	Number each compressor				Part no.
			CMO 24	CMO 26	CMO 28	TCMO 28
	Suction and oil pressure gauge
30-1	R12/R22 bar and °C	0.700	1	1	1	1	1541-251
30-2	R502 bar and °C	0.700	1	1	1	1	1541-365
30-3	R717 bar and °C	0.700	1	1	1	1	1541-109
30-4	R134a/R404A bar and °C	0.700	1	1	1	1	1541-071
	Discharge pressure gauge
31-1	R12/R22bar and °C HP	0.700	1	1	1		1541-191
31-2	R12/R22 bar and °C IP-HP	0.700				1	1541-278
31-3	R502 bar and °C HP	0.700	1	1	1		1541-364
31-4	R502 bar and °C IP-HP	0.700				1	1541-366
31-5	R717 bar and °C C HP	0.700	1	1	1		1541-050
31-6	R717 bar and °C IP-HP	0.700				1	1541-103
31-7	R134a/R404A bar and °C HP	0.700	1	1	1		1541-072
31-8	R134a/R404A bar and °C IP-HP	0.700				1	1541-073
	Bracket for gauge
39-1	Bracket	1.000	1	1	1	1	3146-015
39A-1	Hexagon head screw M5 x 6	0.002	4	4	4	4	1424-140
39B-1	Spring washer	0.002	4	4	4	4	1437-061
	Cooling water connections
40A-1	Set of hoses for cooling water 4 cyl.		1				3185-108
40A-2	Set of hoses tor cooling water 6 cyl.			1			3185-109
40A-3	Set of hoses for cooling water 8 cyl.				1	1	3185-110
40B-1	Hose of connection 3/8" - straight	0.004	10	12	14	14	2334-025
40C-1	Angle - 3/8"	0.009	6	8	8	8	1341-090
40D-1	T-piece	0.015	2	2	2	2	1341-141
40C-1	Hose clamp	0.015	10	12	14	14	1345-16S
40F-1	Cable binder		3	3	3	3	1554-062
	Parts for instruments
41A-1	Gasket dia. 19/14x1.5	0.001	6	6	6	8	2356-124
41B-1	Connecting piece - 2 pipes	0.025	2	2	2	2	2333-012
41C-1	Plug tor connecting piece	0.040	3	3	3	4	2314-048
41D-1	Union nut - R12 - R22 - R502	0.003	5	5	5	6	1376-010
41E-1	Union nut M10x 0,75- R717	0.010	5	5	5	6	1349-011
41F-1	Gasket dia. 9/3 x 1 -R717	0.001	5	5	5	6	2356-117
41H-1	Gasket dia. 14,5/6x1,5	0.001	2	2	2	2	2356-120
41J-1	Connecting piece -1 pipe	0.015				1	2333-014
41Q-1	Pipe holder	0.004	1	1	1	1	1377-096
41P-1	Cylinder head screw M4 x 6	0.002	1	1	1	1	1412-200
41T-1	Pipe section with tlare	0.006	7	7	7	7	2333-016
41U-1	Connecting piece - 3 pipes	0.017	1	1	1	1	2333-013
	Purge valve
42A-1	Purge valve complete	0.300	1	1	1	1	2412-585
42B-1	Threaded nipple
42C-1	Cutting ring	0.135	1	1	1	1	1349-062
42D-1	Nut
42E-1	Nut	0.070	1	1	1	1	2313-045
42F-1	Connection pipe with collar	0.025	1	1	1	1	2334-027
42G-1	Gasket	0.001	2	2	2	2	2356-123
42H-1	Nut	0.060	1	1	1	1	2313-027
	Parts for mounting pressure control
44A-1	Bracket for pressure controls		1	1	1	1	2213-409
44B-1	Counter sunk screw M6 x 12	0.020	2	2	2	2	1413-090
44C-1	Bracket for KP77 or KP1		1	1	1	1	2213-411
44D-1	Bracket for KP98		1	1	1	1	2213-410
44E-1	Socket cap screw M6 x 12	0.004	4	4	4	4	1413-339
44F-1	Spring washer	0.006	4	4	4	4	1437-022
44G-1	Cylinder head screw M4 x 6	0.002	8	8	8	8	1412-200
44M-1	Spring washer dia. 7,1/4 x 1	0.002	8	8	8	8	1437-020
	Pressure controls for HFC/HCFC
45A-1	Pressure control KP15 A	0.533	1	1	1	1	1373-135
45B-1	Differential pressure control MP55	0.864	1	1	1	1	1373-159
	forR717
45A-2	Pressure control KP15 A	0.754	1	1	1	1	1373-142
45B-2	DFfferentiai pressure controF MP55 A	0.978	1	1	1	1	1373-162
	Temperature controls
46A-1	Temperature control KP77	0.466	1	1	1	1	1373-044
46B-1	Temperature control KP98	0.674	1	1	1	1	1373-043
46C-1	Phil pocket for temperature control	0.162	3	3	3	3	1377-171
46D	Gasket for phil pocket dia. 27/21x1,5	0.008	3	3	3	3	2356-133
	Coupling
48A-1	Disc pack	0.282	2	2	2	2	1524-155
48B-1	Bolt	0.054	16	16	16	16	1524-163
48C-1	Level washer	0.004	16	16	16	16	1524-179
48D-1	Lock nut	0.005	16	16	16	16	1524-171
	Crankcase healer
57A-4	Crankcase heater 270W.115V.G1 1/4		1	1	1	1	3181-034-01
57A-5	Crankcase heater 270W, 230V, G 1 1/4		1	1	1	1	3181-035-01
57A-6	Crankcase healer 270W, 250V, G 1 1/4		1	1	1	1	3181-036-01
57B-2	Seating ring dia. 42/49 x 6,5	0.022	1	1	1	1	1349-213
	Bracket for oil filter
59A-1	Bracket for oil filter		1	1	1	1	3421-081
59B-1	Socket screw M8 x 35	0.018	2	2	2	2	1413-359
59C-1	Gasket for bracket		1	1	1	1	2353-171
59D-1	Plug		1	1	1	1	1413-265
	Oil filter
60A	Filter element		1	1	1	1	1517-124
60B	Gasket tor filter		1	1	1	1	1334-025
60H	Washer dia. 19/8.2x6		1	1	1	1	2114-036
60J	Iron ring		3	3	3	3	2114-038
60K	Magnets		3	3	3	3	1517-022
60L	Rod for magnets		1	1	1	1	2112-156
60M	Rubber ring		1	1	1	1	1334-012
60N	Washer		1	1	1	1	1436-034
60P	Locking nut		2	2	2	2	1433-073
	Oil pipes for unloading mechanism
	CMO-24
62A-1	Pipe set	0.200	1				3143-292
	CMO 26
62A-2	Pipe set	0.114		1			3143-291
	CMO 28
62A-3	Pipe set	0.108			1		3143-290
	TCMO 28
62A-4	Pipe set	0.108				1	3143-293
	Joint for oil pipes
62F	Spirolox-ring RS 50	0.002	4	4	4	4	1437-275
62G	O-ring dia. 9,25 x 1,78	0.001	4	4	4	4	1331-010
62 H	O-ring 7,65 x 1,78	0.001	4	6	8	4	1331-009
	Oil separator CMO 2 - HFC/HCFC
65-1	Oil separator - complete		1	1	1		4241-208
65A-1	Housing		1	1	1		4241-207
65B-1	Demister		1	1	1		1375-288
65C-1	End cover		1	1	1		3422-114
65D-1	O-ring for 65C		1	1	1		1331-089
65E-1	Hexagon head screw M16 x 45		4	4	4		1424-102
65F-1	Spring washer		4	4	4		1437-057
65G-1	Gasket against compr. dia. 100/62x1,5		1	1	1		2353-212
65H-1	Hexagon head screw M12 x 40		4	4	4		1424-217
65J-1	Stop valve complete		1	1	1		2414-066
65K-1	Gasket tor stop valve dia. 100/62x1,5		1	1	1		2356-212
65L-1	Hexagon head screw M12 x 120		4	4	4		1424-069
	Oil separator CMO 2 - R717
65-2	Oil separator - complete		1	1	1		4241-230
65G-2	Gasket against compr. dia. 100/62x1,5		1	1	1		2356-212
65H-2	Hexagon head screw M12 x 40		4	4	4		1424-217
65J-2	Stop valve SCV 400 111		1	1	1		2411-840
	Oil separator TCMO 2 - R717- HFC/HCFC
65-3	Oil separator - complete					1	4241-233
65A-3	Housing					1	4241-232
65 B-3	Demister					1	1375-295
65C-3	End cover					1	3254-315
65D-3	O-ring dia. 91,97x3,5	0.004				1	1331-080
65E-3	Hexagon head screw M12 x 35	0.042				4	1424-216
65F-3	Spring washer	0.004				4	1437-081
65G-3	Gasket against compr. dia. 100/62x1,5					1	2356-212
65H-3	Hexagon head screw.M12 x 40	0.046				1	1424-217
65J-3	Slop valve complete					1	2414-066
65K-3	Gasket for stop valve dia. 100/62x1,5	0.014				1	2356-212
65L-3	Hexagon head screw M12 x 120	0.116				1	1424-069
	Extra suction filter - only delivered on demand
66-1	Extra suction filter complete		1	1	1	1	4521-030
66A-1	Filter housing		1	1	1	1	3421-053
66B-1	End cover	2.310	1	1	1	1	3422-103
66C-1	O-ring dia.91.67x3.53	0.004	1	1	1	1	1331-080
66D-1	Hexagon head screw M 12 x 40	0.046	4	4	4	4	1424-217
66E-1	Spring washer dia. 20,2/12,2 x 2.5	0.004	4	4	4	4	1437-081
66F-1	Strainer tilter	0.374	1	1	1	1	3425-082
66G-1	Filter bag	0.028	1	1	1	1	3425-083
66H-1	Insert tor tilter bag	0.032	1	1	1	1	3424-058
66J-1	O-ring dia. 75.56 x 5,33	0.004	1	1	1	1	1331-042
66K-1	Hexagon head screw M 14 x 45	0.070	4	4	4	1	1424-242
66L-1	Gasket against compr. dia. 112/70x1,5	0.018	1	1	1	1	2356-213
	Oil cooler R717
76A-1	Angla swivel screw-joint dia. 3/8"/12	0.180	1	1	1	1	1349-325
76B-1	Bushing G 3/4" x G 3/8"		2	2	2	2	2312-022
76C-1	Gasket dia. 32/27x1,5	0.008	2	2	2	2	2356-139
76D-1	Straight swivel-in joint	0.070	2	2	2	2	1349-053
76E-1	Angle swivel screw-in joint	0.170	1	1	1	1	1349-325
76F-1	Straight screw-in joint	0.058	1	1	1	1	1349-054
	Oil cooler HFC/HCFC
76A-2	Angle swivel screw-joint dia. 3/8"/10	0.178	1	1	1	1	1349-324
76B-2	Bushing 03/4" x G 3/8"		2	2	2	2	2312-022
76C-2	Gasket dia. 32/27 x 1,5	0.008	2	2	2	2	2356-139
76D-2	Straight screw-in joint	0.070	2	2	2	2	1349-053
76 E-2	Angle swivel screw-in joint	0.170	1	1	1	1	1349-325
76F-2	Angle swivel screw-in joint	0.170	1	1	1	1	1349-325
80	Solenoide valve blok, complete with 0,6 mm orifice for oil return, coil	2.040	1	1	1	1 or 2	1372-179
	Strainer kit consist of:		1	1	1	1or2	1372-089
80E	Strainer
80G	Al-gasket
	Service hit consist of:		1	1	1	1 or 2	1372-086
80P	Armature tube
80H	Armature
80K	O-ring
80M	O-ring
80L	Al-gasket
80N	Snap fastener
	Seal kit consist of:		1	1	1	1 or 2	1372-091
80G	Al-gasket
80K	0-RING
80M	0-RING
80L	Al-gasket
80Q	Al-gasket
	Orifice kit 0,6 mm consist of:		1	1	1	1 or 2	1371-034
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 6 mm
	Orifice kit 0,8 mm consist of:		1	1	1	1 or 2	1371-035
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 8 mm
	Orifice kit 1,0 mm consist of:		1	1	1	1 or2	1371-036
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 1,0 mm
	Orifice kit 3,3 mm (tor thermopump only) consist of:		1	1	1	1 or 2	1371-037
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 3,3 mm
80J-1	Goil 220/230V 50/60 Hz, 10W	0.285					1372-537
80J-2	Coil 110V, 50/60 Hz, 10W	0.285					1372-538
80J-3	Coil 240V, 50 Hz,10W	0.285					1372-539
80J-4	Cofl24V, 50 Hz, 10 W	0.285					1372-541
	Injection system for TCMO
	Only for TCMO with int. IP system
83A-1	Guard	0.968				1	3116-048
83B-1	Nipple	0.156				1	3116-041
83C-1	O-ring dia. 25 x 3,5 tor 83B	0.012				1	1331-022
83D-1	O-ring dia. 20,2 x 3,5 for 83B	0.009				1	1331-019
83E-1	Socket cap screw M6 x 16	0.006				2	1413-340
83F-1	Spring washer 11,1/6,1 x 1,6	0.004				2	1437-022
83G-1	Stop valve DN 20 witn oval flange	1.800				1	2412-016
83H-1	Gasket tor stop valve dia. 44/33 x 1.5	0.002				1	2356-039
83J-1	Hexagon head screw M12 x 40	0.045				2	1424-217
83K-1	Stop valve SG 6	0.540				1	2413-123
83L-1	Gasket for valve dJa. 18/10 x 1,5	0.006				2	2356-123
83M-1	Filter complete					1	4522-007
83M-2	Insert for tiller					1	3425-097
83N-1	Solenoid valve without coil	0.688				1	1372-423
83S-1	Coil 220/230V, 50/60Hz, 10W	0.260					1372-537
83S-2	Coil 110V, 50/60Hz. 10W	0.260					1372-538
83S-3	Coil 240V,50Hz, 10W	0.260					1372-539
83P-1	Injection valve TEAT 20-5 - R22	2.460				1	1371-242
83P-2	Injection valve TEAT 20-5 - R717	2.460				1	1371-240
	Spec. spring for 83P-2	0.018				1	1523-070
83Q-1	Soienoid vatve for by-pass, without coil	0.822				1	1372-423
83T-1	Coil 220/230V, 50/60Hz, 10W	0.260					1372-537
83T-2	Coil 11CV, 50/60Hz, 10W	0.260					1372-538
83T-3	Coil 240V, MHz, 10W	0.260					1372-539
83R-1	Non-return valve for discharge pipe	2.958				1	1372-249
	Side cover with solenoid valves for capacity control
86A-1	Side cover with oil level glass	10.760	1	1	1	1	3113-134
86B-1	Gasket for side cover	0.014	1	1	1	1	2353-102
86C-1	Hexagon head screw M12 x 65	0.070	10	10	10	10	1424-059
86D-1	Hexagon head screw M12 x 75	0.078	2	2	2	2	1424-061
86E-1	Oil level gfass	0.230	1	1	1	1	1226-015
86F-1	O-ring for oil level glass,  dia.52,07 x 2,62	0.002	1	1	1	1	1331-140
86G-1	Hexagon head screw M6 x 18	0.006	4	4	4	4	1424-148
86H-1	Valve body with 3 solenoid valves,without coils	3.690	1	1	1	1	3143-413
86X-1	Coil 220/230V, 50/60Hz, 10W	0.260					1373-537
86X-2	Coil 110v,50/QOHz, 1CW	0.260					1372-538
86X-3	Coil 240V. 50Hz, 10W	0.260					1372-539
86Y	Solenoid valve- Service lot for one solenoid valve	3.690					1372-424
86J-1	Gasket tor valve body	0.010	1	1	1	1	2353-150
86J-2	Gasket for valve body for ex-exeiution	0.010	1	1	1	1	2353-188
86K-1	Hexagon head screw M8 x 70	0.030	4	4	4	4	1424-042
86N-1	Washer dia. 24/13x2,5	0.006	12	13	12	12	1436-036
86P-1	Plug connector for coils		3	3	3	3	1372-545
86Q-1	Valve for prelubrication		1	1	1	1	2412-585
86R-1	Nut		1	1	1	1	2313-045
86S-1	Special joint		1	1	1	1	2334-027
86T-1	Cap		1	1	1	1	2313-027
86U-1	Joint 3/8"		1	1	1	1	1349-053
86V-1	Alu-gasket		1	1	1	1	2355-123
	Side cover for unloading start
87A-1	Side cover with oil level glas	10.760	1	1	1	1	3113-134
87B-1	Gasket for side cover	0.014	1	1	1	1	2353-102
87C-1	Hexagon head screw M12 x 6	0.070	10	10	10	10	1424-059
87D-1	Hexagon head screw M12 x 75	0.078	2	2	2	2	1424-061
87E-1	Oil level glas	0.230	1	1	1	1	1226-015
87F-1	O-ring dia. 52,07x2,52	0.002	1	1	1	1	1331-140
87G-1	Hexagon head screw M6 x 18	0.006	4	4	4	4	1424-149
87K-1	Cover for unloading start	0.805	1	1	1	1	3143-187
87L-1	Gasket for cover	0.008	1	1	1	1	2353-149
87M-1	Hexagon head screw M8 x 35	0.016	4	4	4	4	1424-170
87N-1	Washer dia. 24/13x2,5	0.006	12	12	12	12	1436-036
87Q-1	Valve for preilubrication		1	1	1	t	2412-585
87R-1	Nut		1	1	1	1	2313-045
87S-1	Special joint		1	1	1	1	2334-027
87T-1	Cap		1	1	1	1	2313-027
87U-1	Joint 3/8"		1	1	1	1	1349-053
87V-1	Alu-gasket		1	1	1	1	2356-123
	Intermediate pressure connection
	Only for TCMO with ex. system
90A-1	IP champer R22					1	3114-100
90A-2	IP champer R717					1	3114-101
90B-1	IP pipe					1	3114-102
90C-1	Filter strainer					1	2464-232
90D-1	O-ring					2	1331-019
90E-1	Flange for cover					1
90F-1	Insert for cover					1
90H-1	O-ring					1	1331-024
90H-1	Screw					4	1424-191
90J-1	Gasket					1	2353-180
90K-1	Screw					4	1424-194
90L-1	Nut					4	1432-064
90M-1	Washer					8	1436-035
	Oil return with solenoid valve
	Only for CMO with HFC/HCFC
94A-1	Cover against oil separator		1	1	1		4241-229
94B-1	O-ring dia. B2,15x 3,5	0.004	1	1	1		1331-077
94C-1	Hexagon head screw M8 x 18	0.012	8	8	8		1424-164
94D-1	Spring washer	0.006	8	8	8		1437-054
94E-1	Straight screw-in joint GE 6-SR 1/4"	0.054	1	1	1		1349-124
94F-1	Stop valve BML 6	0.280	1	1	1		1374-050
94G-1	Straight screw-in joint GE 10-LR1/4"	0.048	1	1	1		1349-051
94H-1	Filter	0.054	1	1	1		4522-007
94J-1	Straight screw-in joint GE 8-LR 1/4°'	0.044	1	1	1		1349-050
94K-1	Weiding nipple	0.01 B	1	1	1		2322-032
94L-1	Gasket	0.006	2	2	2		2356-123
94M-1	Nozzle 0,6 mm	0.002	1	1	1		3142-035
94N-1	Union nut	0.080	1	1	1		2313-006
94P-1	Bushing G1/4"x G 1/2"	0.072	1	1	1		2312-013
94Q-1	Angle swivel screw-in joint 1/4" NPT	0.120	2	2	2		1349-089
94R-1	Straight screw-in joint GE 8-LR 1/4"	0.020	1	1	1		1349-106
94S-1	Solenoid valve without coil	0.624	1	1	1		1372-426
94U-1	Coil 220/230V, 50/60HZ, 10W	0.260					1372-537
94U-2	Coil 110V, 50/60HZ, 10W	0.260					1372-538
94U-3	Coil 240V, 50Hz, 10W	0.260					1372-539
94T-1	Screw-in joint 1/4" NPT tor dia. 10	0.046	1	1	1		1349-060
	Oil return with solenoid valve
	Only tor CMO wilh R717
94A-2	Cover against oil separator		1	1	1		3254-066
94B-2	Gasket for cover	0.020	1	1	1		2355-105
94G-2	Hexagon head screw M12 x 30	0.042	6	6	6		1424-215
94D-2	Straight screw-in joint	0.102	1	1	1		1349-089
94E-1	Nipple	0.044	1	1	1		2334-024
94F-2	Union nut	0.080	2	2	2		2313-006
94G-2	Gasket for nipple/valve	0.006	4	4	4		2356-123
94H-2	Stop valve		1	1	1		2413-010
94J-2	Welding nipple	0.018	1	1	1		2322-032
94K-2	Angle swivel screw-in joint G 1/4"	0.098	2	2	2		1349-087
94L-2	Filter complete		1	1	1		4522-002
94M-2	Nozzle 0,5 mm	0.002	1	1	1		3142-034
94P-2	Nipple G1/4"xG1/2°	0.082	1	1	1		2311-040
94Q-2	Straight screw-in joint 1/4" NPT	0.042	1	1	1		1349-056
94S-2	Solenoid valve without coil	0.624	1	1	1		1372-422
94U-1	Coil 220/230V, 50/50H2, 10W	0.260					1372-537
94U-2	Coil 110V,50/60Hz, 10W	0.260					1372-538
94U-3	Coil 240V, MHz, 10W	0.260					1372-539
	Oil return wilh solenoid valve
	Only for TCMO with R717 and HFC/HCFC
94A-3	Cover against oil separator					1
94B-3	O-ring dia. 91,67x 3,53	0.004				1	1331-080
94C-3	Hexagon head screw M12 x 40	0.046				4	1424-217
94D-3	Spring washer 20,2/12,2 x 2,5	0.004				4	1437-081
94E-3	Angle swivel screw-joint	0.102				1	1349-087
94F-3	Nipple	0.044				1	2334-024
94G-3	Union	0.080				3	2313-006
94H-3	Gasket for nipple/valve	0.006				4	2356-123
94J-3	Welding nipple	0.018				2	2322-032
94K-3	Angle swivel screw-in joint G 1/4"	0.098				2	1349-087
94L-3	Filter complete					1	4522-002
94M-3	Nipple G 1/4" xG 1/2"	0.082				1	2311-040
94N-3	Gasket dia. 19/14x1,5	0.004				2	2356-124
94P-3	Nozzie 0,4 mm - only for R717	0.002				1	3142-033
94P-3	Nozzle 0.5 mm - only for HFC/HCFC	0.002				1	1342-034
940-3	Straight screw-in joint 1/4" NPT	0.042				2	1349-056
94S-3	Solenoid valve without coil	0.624				1	1372-422
94U-1	Coil 220/230V, 50/60Hz, 10W	0.260					1372-537
94U-2	Coil 10V, 50/60Hz. 10W	0.260					1372-538
94U-3	Coil 240V, 50Hz, 10W	0.260					1372-539
94	Stop valve					1	2413-010
	Oil return with float valve
	Only tor CMO with HFC/HCFC
95A-1	Cover against oil separator	0.626	1	1	1		3411-007
95B-1	O-ring dia.82,15 x 3,5 for 95A	0.004	1	1	1		1331-077
95C-1	Hexagon head screw M8 x 18	0.012	8	8	8		1424-164
95D-1	Sprig washer	0.006	8	8	8		1437-054
95E-1	Float valve complete	0.200	1	1	1		1374-505
95F-1	Distance ring dia. 10/8 x 8	0.002	1	1	1		2212-036
95G-1	Hexagon head screw M5 x 35	0.006	2	2	2		1413-334
95H-1	Angle swivel G 1/4" for dia. 6		1	1	1		1349-092
	OiE return with float valve
	Only for CMO with P717
95A-2	Cover against oil separator		1	1	1		4512-003
95B-2	Gasket tor cover		1	1	1		2355-108
95C-2	Filter		1	1	1		3425-077
95D-2	Hexagon head screw M12 x 30		6	6	6		1424-215
95E-2	Angle swivel screw-in joint		2	2	2		1349-092
	Oil return with float valve
	Only for TCMO with R717 and HFC/HCFC
95A-3	Cover with float valve					1	4512-004
95B-3	O-ring dia. 91,67x 3,53	0.004				1	1331-080
95C-3	Hexagon head screw M12 x 40	0.046				4	1424-217
95D-3	Spring washer dia. 20,2/12,2 x 2,5	0.004				4	1437-081
95E-3	Angle swivel screw-in joint					2	1349-092
	Thermopump
98A-1	Side cover for thermopump		1	1	1	1	3113-133
98B-1	Monitor box		1	1	1	1	1553-215
	Allen screw		2	2	2	2	1412-204
	Spring washar		4	4	4	4	1437-020
98C-1	Level indicator		2	2	2	2	3185-038
98D-1	Outer part for level indicator		2	2	2	2	3185-034
98E-1	Washer dia. 20/13x1,5 Al		3	3	3	3	2356-125
98F-1	Rubber cap		2	2	2	2	1554-194
98G-1	Solenoid valve without coil		1	1	1	1	1372-422
98H-T	Solenoid valve without coil		1	1	1	1	1372-423
98AB-1	Coil 220/230V. 50/60Hz. 10W	0.260					1372-537
9BAB-2	Coil 110V, 50/60HZ, 10W	0.260					1372-538
98AB-3	Coil 240V, 50Hz, 10W	0.260					1372-539
98K-1	Check valve		2	2	2	2	1364-008
98M-1	VA-joint with nozzle 0,6 mm					1	2314-100
	Plug connector for corils		1	1	1	1	1372-490
98M-2	VA-joint with nozzle 1,2 mm		2	3	4		2314-097
	Bracket for stop valve		1	1	1	1	2213-085
	Allen screw M4x 12		2	2	2	2	1412-203
	Cable binder		1	1	1	1	1554-053
	Straight joint 10 mm		1	1	1	1	1349-051
	T-joint 10 mm		2	3	4	1	1349-041
	Straight joint 6 mm		3	3	3	3	1349-006
	Socket 10 mm NPT		1	1	1	1	1349-101
	Angis swivel joint 10 mm BSP		1	1	2	1	1349-177
	Angle joint 10 mm		2	2	2	2	1349-089
	Angle swivel joint 6 mm					1	1349-092
	Angle joint 10 mm		1	1	2	1	1349-033
	Reducing socket 3/8" -1/4"		1	1	1		1349-076
	Straight joint 10 mm NPT		2	2			1349-060
	Arigle socket 10 mm		1				1349-112
	Washer 13/10 x 1,5 Al		2	2	2		2356-123
	Washer 25/17 x 1,5 Al		1	1	1		2356-130
	Washer 19/14 x 1,5 AI		2	2	2	2	2356-124
	Spring washer tor M12		1	1	1		1437-026
	Plug			1	1		2314-048
	Pipe for pressure equalizing		1	1	1		3185-033
98N-1	Filter		1	1	1	1	4522-007
98P-1	Stop valve		1	1	1	1	2412-277
98Q-1	Cooling cover		1	1	1	1	3113-171
98R-1	Washer dia. 29/21 x1,5 AI		2	2	2	2	2356-136
8BS-1	Gasket for side cover		1	1	1	1	2353-101
98T-1	Hexagon head screw M12 x 75		14	14	14	14	1424-061
	Socket 1 /4"		1	1	1	1	1349-101
98U	Solenoid valve without coil						1372-423
93V	Solenoid valve without coil		1	1	1		1372-423
98AB-1	Coil 220/230V, 50/60Hz, 10W	0.260	1	1	1	1	1372-537
99A8-2	Coil 110V,50/60Hz,10W	0.260					1372-538
98AB-3	Coil 240V, 50Hz,10W	0.260					1372-539
98X	PT100 sensor		1	1	1	1	1373-253
98Y	Stop valve		1	1	1	1	2412-277
98Z	Non-return valve		1	1	1	1	1364-022
98AA	Screw joint		1	1	1	1	2314-105
	UNISAB
99A-1	Support for UNISAB		1	1	1	1	2213-500
99B-1	Distance washers		4	4	4	4	2212-130
99C-1	Scraw for support M10 x 20		2	2	2	2	1424-190
99D-1	Screw tor UNISAB M6 x 20		4	4	4	4	1424-152
99E-1	Washers dia. 22/7		4	4	4	4	1436-025
Tools for compressor CMO and TCMO
	Line no. A600 = Norma set
	Lire no. A601 = Extended set
	Line no. A6C2 =Tools for coupling AMR
	Line no. A603 =Tools for alignment of flexible coupling

 

Pos  no	Designation	Dim	Part no		Line no A600	Line no A601	Line no A601	Line no A601
1	Clamp with screw		3183-141		4	4
2	Toois for shaft seal		3183-139		1	1
3	Tommy screws tor cyl. liners		3183-041		2	2
5	Supporting plate for pistons		3181-114		8	8
6	Spanner for healing cartridge	JV55	3183-060		1	1
7	Puller for coupling or belt pulley		3183-058		1	1
8	Adjustment jig for couping		3183-104					1
9-1	Wrench for socket cap screw	JV2				1
9-2	Wrench for socket cap screw	JV3				1
9-3	Wrench for socket cap screw	JV4				1
9-4	Wrench for socket cap screw	JV5				1
9-5	Special wrench for shaft seal		1612-392			1
10	Retaining ring pliers	J21				1
11-1	Ring and open spanner	JV10	1612-392			1
11-2	Ring and open spanner	JV13				1
11-3	Ring and open spanner	JV17				1
11-4	Ring and open spanner	JV27				1
12-1	Ring spanner	JV6X7				1
12-2	Ring spanner	JV8X9				1
13-1	Socket wrench	JV10				1
13-2	Socket wrench	JV13				1
13-3	Socket wrench	JV17				1
13-4	Socket wrench	JV19				1
13-5	Sockte wrench	JV22				1
13-6	Socket wrench	JV24				1
13-7	Socket wrench	JV1/2				1	1
14	Ratchet handle					1
15	Speed handle					1
16	Universal joint for socket wrench					1
17-1	Extension rod far socket wrench					1
17-2	Extension rod tor socket wrench					1
18	Screw driver socket					1
19-1	Torque wrench 15-90 Mm					1	1
19-2	Torque wrench 40-200 Nm					1
20	Coupler for torque wrench					1	1
21	Open spanner for torque wrench	JV1/2				1	1
22	Feeler gauge							1

Spare parts for SMC 104-106-108 & TSMC 108 Mk3 Type S-L and E

Spare parts for SMC 104-106-108 & TSMC 108 Mk3 Type S-L and E
Relevant drawings for compressor					SMC	TSMC
SMC 100 Mk 3, S-L-E (delivered after 89 - 10)					0661-521	0661-522
Cylinder liner ect. SMC  - TSMC 104,106, 108 Mk 3 (after 89.10)					0661-520
SMC 100 M k3					0661-755	0661-756
Cylinder liner ect. SMC - TSMC 100 Mk3					0661-605
*) If the compressor runs as heat pump, this must be mentioned when ordering, to ensure a correct delivery
Pos.	Designation	Weight each in kg	Number each compresssor				Part No
			SMC 104	SMC 106	SMC 108	TSMC 108
	Compressor frame
1A-1	Frame SMC 104	240.000	1				3111-065
1A-2	Frame SMC 106	274.000		1			3111-066
1A-3	Frame SMC 108	285.000			1		3111-067
1 A-4	Frame TSMC 108	290.000				1	3111-068
1B-1	Oil levei glass dia. 80	0.230	1	1	1	1	1226-015
1C-1	O-ring PRP 137 - 52,07 x 2,62 *)	0.002	1	1	1	1	1331-140
1D-1	Hexagon head MS x 16	0.010	4	4	4	4	1424-148
	Top cover - air cooled
2A-1	Top cover S-L,	19.000	1	2	3	2	3113-191
2A-2	Top co^er with fiange S-L	20.500	1	1	1	2	3113-192
2A-3	Top cover E	19.000	1	2	3	2	3113-177
2A-4	Top cover with flange E	20.500	1	1	1	2	3113-176
2C-1	Gasket for top cover	0.020	2	3	4	4	2353-151
2D-1	Hexagon head M14x90	0.120	30	46	62	60	1424-083
2F-1	Hexagon head M14 x 120	0.165	2	2	2	4	1424-090
2G-1	Washer for M14 dia- 28/15 x 2,5	0.010	32	48	64	64	1436-037
	Top cover-water cooled  (see sketch below)
2A-1	Top cover S-L	19.000	1	2	3	2	3113-191
2A-2	Top cover with flange S-L	20.500	1	1	1	2	3113-192
2A-3	Top cover E	19.000	1	2	3	2	3113-177
2A-4	Top cover with flange E	20.500	1	1	1	2	3113-176
2B-1	Water cover for cover with flange	5.800	1	1	1	2	3113-195
2B-2	Water cover left	5.800	1	1	2	2	3113-193
2B-3	Water cover right	5.800		1	1		3113-194
2C-1	Gasket for top cover	0.020	2	3	4	4	2353-151
2D-1	Gasket for water cover pos. 2B-1	0.020	1	1	1	2	2353-176
2D-2	Gasket for water cover pos, 2B-2/2B-3	0.020	1	2	3	2	2353-175
2E-2	Hexagon head screw M14 x 110	0.150	30	46	62	60	1424-087
2F-1	Hexagon head screw M14 x 120	0.165	2	2	2	4	1424-090
2G-1	Washer for Mt4, dia, 28/15 x 2,5	0.010	32	48	64	64	1436-037
2H-1	Hexagon head screw Mi 0 x 35	0.050	4	5	8	9	1424-193
2J-1	Washer for M10, dia. 21/10,5 x 2	0.008	4	6	8	8	1436-035
	Side cover o sir cooled
3A-1	Side cover	10.900	2	2	2	2	3113-148
3C-1	Gasket for side cover	0.020	2	2	2	2	2353-151
3E-1	Hexagon head screw M14 x 65	0,045	32	32	32	32	1424-246
3G-1	Washer for M14, dia. 28/15 x 2.5	0.010	32	32	32	32	1436-037
	Side cover - water cooled
3A-2	Side cover t 15,000	15.000	2	2	2	2	3113-140
3B-1	Water cover	5.800	2	2	2	2	3113-138
3C-1	Gasket for side cover	0.020	2	2	2	2	2353-151
3D-1	Gasket for water cover	0.020	2	2	2	2	2353-154
3E-2	Hexagon head screw M14 x 55	0.065	28	28	28	28	1424-244
3F-1	Hexagon head screw M14 x 35	0.045	4	4	4	4	1424-240
3G-1	Washer for M14, dia. 28/15 x 2,5	0.010	32	32	32	32	1436-037
3H-1	Hexagon head screw M  12 x 40	0.050	2	2	2	2	1424-217
3J-1	Washer for M12. dia. 24/13 x 2,5	0.008	2	2	2	2	1436-036
	End cover at pump end
4A-1	End cover	17.950	1	1	1	1	3113-028
4B-1	Gasket	0.020	1	1	1	1	2353-011
4C-1	Hexagon head screw M14 x 100	0.150	14	14	14	14	1424-085
40-1	Washer for M14 dia. 28/15x2,5	0.010	14	14	14	14	1436-037
	Bearing cover at pump end
5A-1	Bearing cover	9.100	1	1	1	1	3113-031
58-1	Hexagon head screw M14 x 35	0,055	6	6	6	6	1424-240
5C-1	Bushing	1.200	1	1	1	1	2132-021
5C-2	Bushing for repair (0,5 mm underside)	1.220	1	1	1	1	2132-022
5D-1	Gascet-0,3 mm	0,005	1	1	1	1	2353-013
5D-2	Gascet-0,5 mm	0,006	1	1	1	1	2353-100
5D-3	Gasket - 0,75 mm	0.010	1	1	1	1	2353-014
5D-4	Gasket -1.0 mm	0.015	1	1	1	1	2353-015
	Bearing cover at shaft seal end
6A-1	Bearing cover	23.000	1	1	1	1	3113-124
6B-1	Hexagon head screw M14 x 60	0,085	14	14	14	14	1424-245
6C-3	Bushing	1.200	1	1	1	1	2132-021
6C-4	Bushing for repair (0,5 mm undersize)	1.200	1	1	1	1	2132-022
6D-1	Gasket	0.020	1	1	1	1	2353-011
6E-1	Washer for M14, dia. 28/15 x 2,5	0.010	14	14	14	14	1436-037
6F	Valve for prelubrication		1	1	1	1	2412-585
6G	Nut		1	1	1	1	2313-045
6H	Speciai joint		1	1	1	1	2334-027
6J	Cap		1	1	1	1	2313-027
6K	Joint 3/8"		1	1	1	1	1349-053
6L	Alu gasket		1	1	1	1	2356-123
	Shaft seal cover for type SB100
8A-2	Shaft seal cover  Δ		1	1	1	1	3113-215
8B-1	Gasket for shaft seal Δ		1	1	1	1	2353-005
8C-1	Hexagon head screw M10 x 40  Δ		6	6	6	6	1424-194
8D-1	Hose connection G 1/4" Δ		1	1	1	1	1345-143
8E-1	Plastic hose 3/16" x 300 Δ		1	1	1	1	1241-190
8F-1	Splash ring  Δ		1	1	1	1	1437-295
8G-1	Locking ring dia. 111/105 x 3		1	1	1	1	3126-169
8H-1	Groover pin dia. 4x20		1	1	1	1	1446-081
	Shaft seat type SB 100
10-3	Shaft seal complete,includes all parts		1	1	1	1	3126-177
	marked Δ
	for compressor nos,after 98379 incl.
10-4	Shaft seal to replace incl.part nos		1	1	1	1	3126-170
	10E-2, 10F-1. 10D-1, 10G-1. 10J-1,
	10L-2
	for compressor nos.up to 98378 incl.
10-5	Shaft seal to replace incl.part nos		1	1	1	1	3126-178
	10E-2. 10F-1, 10D-1, 10G-2, 10L-2,
	10J-1				1
	for compressor nos.up to 98379 incl.
10A-1	Retaining flange  Δ		1	1	1	1	3126-166
10B-1	Spring  Δ		10	10	10	10	2142-058
10D-1	O-ring dia. 75,6 X 3,5 *) Δ		1		1	1	1331-075
10E-2	Slide ring(cast iron) Δ		1	1	I	1	3126-175
10F-1	Slide ring (special carbon) Δ		1	1	I	1	3126-168
10G-1	O-ring dia. 82.15 X 3.5 *)		1	1	1	1	1331-077
10G-2	Seating ring  Δ		1	1	1	1	1332-124
10H-1	Locking ring  Δ		1	1	1	1	3126-153
10J-1	Socket cap screw M 5x 16 Δ		4	4	4	4	1413-329
10L-2	Back-up ring  Δ		1	1	1	1	1332-125
10M-2	Locking ring  Δ		1	1	1	1	1437-046
	Oil pump
11-1	Oil pump	2.400	1	1	1	1	3141-004
11A-1	Housing	0.800	1	1	1	1
11B-1	Cover	0.800	1	1	1	1
11E -1	Gear wheel	0.330	1	1	1	1
11F-1	Gear wheel	0.400	1	1	1	1
11G-1	Gear wheli for pump pinion	0.660	1	1	1	1	3141-046
11H-1	Gear wheel	0.530	1	1	1	1	3141-047
11J-1	Lock nut M10 x 10,7	0.015	1	1	1	1	1433-080
11K-1	Gasket - paper - 0.2 mm	0.001	1	1	1	1	2353-021
11L-1	Washer for M 10dia. 21/10,5 x 2	0.005	1	1	1	1	1436-035
11M-1	Hexagon head screw M 6 x 30	0.010	4	4	4	4	1424-153
11N -1	Key - 5 x 5 x 12	0.002	1	1	1	1	1526-050
11P-1	Gasket dia. 32/27 x 1,5	0.005	1	1	1	1	2356-139
11Q-1	Hexagon head screw M12 x 25	0.040	2	2	2	2	1424-215
11R-1	Spring washer dia. 12	0.002	2	2	2	2	1437-081
11 S-1	Threaded nipple - 3/4" x 7/8" BSP	0.230	1	1	1	1	2311-007
11T-1	Spring washer - dia- 11,1 /6.1 x 1,6	0.005	8	8	8	8	1437-022
11U-1	Hexagon head screw M 6 x 35	0.012	4	4	4	4	1424-155
11V -1	Guide pin		2	2	2	2	1445-066
	Unloading cylinder
12-1	Unloading cylinder	1,765	1	1	1		3135-149
	Complete L=75, S=21.5
12-2	Unloading cylinder	1.790	1	1	1	1	3135-150
	Complete L=100. S=46,5
12-3	Unloading cylinder	1.815		1	1	1	3135-151
	Complete L=125, S=71,5
12-4	Unloading cylinder	1.840			1	1	3135-152
	Complete L=150, S=96,5
12-5	Unloading cylinder (HP)	1,8				1	3135-161
	Complete L=82, S=24,5
12A-1	Unloading cylinder	1.700	2	3	4	3	3135-147
	(SMC and TSMC LP)
12A-2	Unloading cylinder	1.800				1	3135-148
	(TSMC HP)
12B-1	Piston	0.220	2	3	4	4	3135-034
12C-1	Piston rod 75 mm (SMC only)	0.065	1	1	1		3135-041
12C-2	Piston rod 100 mm	0.090	1	1	1	1	3135-042
12C-3	Piston rod 125 mm	0.115		1	1	1	3135-043
12C-4	Piston rod 150 mm	0.140			1	1	3135-044
12C-5	Piston rod 82 mm,grounded	0.090				1	3135-140
	(TSMC HP only)
12D-1	Threaded plug - 3/8" BSP	0.065	2	3	4	4	2314-025
12E-1	Gasket dia. 25/17 x 1,5	0.002	2	3	4	4	2356-130
12F-1	Seeger ring dia. 52  (SMC and TSMC LP)	0.008	2	3	4	3	1437-155
12G-1	Spring guide	0.040	2	3	4	4	2145-004
12H-1	Spring retainer (SMC and TSMC LP)	0.110	2	3	4	3	3135-057
12J-1	Spring (outer)	0.065	2	2	4	4	2142-056
12J-2	Spring (inner)	0.035	2	3	4	4	2142-055
12K-1	Benzing ring - dia. 9 mm	0,002	2	3	4	4	1437-105
12K-2	Benzing ring - dia. 7 mm  (SMC and TSMC LP)	0.001	2	3	4	3	1437-103
12L-1	Hexagon head screw M10 x 30	0.030	8	12	16	16	1424-192
12M-1	Cover (TSMC HP only)	0.800				1	3135-105
12N-1	Gasket for cover (TSMC HP only)	0.010				1	2353-025
12P-1	Look nut - UNF 3/8" (TSMC HP only)	0.010				1	1433-100
12Q-1	Socket cap screw M4 x 16  (TSMC HP only)	0.010				6	1413-007
12R-1	0-ring PRP n 2 12.37x2,62  (TSMC HP only)")	0.001				1.	1331-013
12S-1	Oasket 100 x 100x2	0.010	2	3	4	4	2354-023
	Frame for unloading mechanism
	Frame compiete incl. pos. 13E-1						3184-216
13A-1	Suspension rod	0.290	2	3	4	4
13B-1	Suspension rod	0.290	2	3	4	4
13C-1	Cross piece	0.330	2	3	4	4
13D-1	Cross piece	0.330	2	3	4	4	3135-188
13E-1	Countersunk screw M6 x 16	0,020	8	12	16	16	1413-092
	Bracket for unloading mechanism
14A-1	Bracket with pin	0.065	4	6	8	7	3135-060
14B.1	Spacing ring	0.005	8	12	16	14	2124-003
14C-1	Hexagon head screw M6 x 30	0.010	8	12	16	14	1424-154
14D-1	Spring washer - dia. 6	0.005	8	12	16	14	1437-022
	Rocker for unloading mechanism
15A-1	Rocker	0.050	8	12	16	16	3135-096
15B-1	Bearing for SMC and TSMC LP	0.006	8	12	16	12	3135-099
15B-2	Bearing for TSMC HP	0.006				4	3135-101
15C-1	Spring retainer	0.001	8	12	16	16	2145-001
15D-1	Spring	0.007	8	12	16	16	2142-061
15E-1	Washer for bearing cup - 0.5 mm	0.001					2114-003
	Crankshaft -all without certificate
16A-1	Crankshaft for SMC 104S,complete	42.400	1				3121-018
16A -2	Crankshaft for SMC 106S, complete	45.400		1			3121-019
16A -3	Crankshaft for SMC 108S  and TSMC 108S, complete	47.600			1	1	3121-020
16A -4	Crankshaft for SMC 104L, complete	45.600	1				3121-104
16A -5	Crankshaft for SMC 106L, compieie	47.800		1			3121-105
16A -6	Crankshaft for SMC 108L  and TSMC 108L, complete	50.600			1	1	3121-106
16A-11	Crankshaft for SMC 104E, complete		1				3121-213
16A -12	Crankshaft for SMC 106E, complete			1			3121-214
16A -13	Crankshaft for SMC 108E  and TSMC 108E. complete						3121-215
16B-1	Plain washer with pin	0.800	1	1	1	1	2125-084
16C-1	Key- 18 x 11 x 55	0.080	1	1	1	1	2123-005
16D-1	Hexagon head screw M16 x. 55	0.050	1	1	1	1	1424-104
16E-1	Spring washer-dia. 16	0.004	1	1	1	1	1437-027
16F-1	Plug M12 S-type	0.010	1	1	1	1	1413-260
16F-2	Plug 1/4" L-type	0.010	3	3	3	3	1343-141
	Connecting rod
17-1	Connecting rod, compieie  SMC and TSMC LP	2.700	4	6	8	6	3123-004
17-2	Connecting rod, complete TSMC HP	2.700				2	3123-006
17A-1	Half-section of bearing	0.080	8	12	16	16	2133-003
17A-2	Half-section of bearing  [0.5 mm undersize)	0.080	8	12	16	16	2133-004
17B-1	Bushing for piston pin  SMC and TSMC LP	0.200	4	6	8	6	2132-004
17B-2	Needle roller bearing TSMC HP	0.200				2	1511-275
17C-1	Bolt for connecting rod	0.055	8	12	16	16	2111-068
17D-1	Lock nut-3/8" UNF	0.010	8	12	16	16	1433-116
	Piston with pin and rings
18-1	Piston with pin and rings S	1.320	4	6	8	8	3124-002
18-2	Piston with pin and rings L	1.320	4	6	8	8	3124-052
18-3	Piston with pin and rings E	1.320	4	6	8	8	3124-065
18A-1	Piston pin	0.500	4	6	8	8	3125-084
18B-1	Piston ring	0.025	8	12	16	16	3125-130
18C-1	OH scraper rings	0.030	4	6	8	8	3125-065
18D-1	Seeger-ring - dia- 40 (inside diameter)	0.005	8	12	16	16	1437-150
	Cylinder Uner with sction valve
19-1	Cylinder liner with suction valve R717, SMC -TSMC LP, S and L	4.100	4	6	8	6	3112-085
19-2	Cylinder liner with suction valve HFC/HCFC, SMC - TSMC LP, S and L	4.100	4	6	8	6	3112-086
19-3	Cylinder liner with suction valve R717, SMC-TSMC HP, and L	4.100				2	3112-087
19-4	Cylinder liner with suction valve HFC/HCFC, TSMC HP. S and L	4.100				2	3112-088
19-5	Cylinder liner with suction valve R717, SMC -TSMC LP,E	4.500	4	6	8	6	3112-081
19-6	Cyiinder liner with suction valve R717. SMC-TSMC HP. E	4.500				2	3112-097
19A-1	Cylinder liner S and L	3.500	4	6	8	8	3112-065
19A-2	Cylinder liner, E	4.000	4	6	8	8	3112-080
19B-1	Unloading rings with pins, S and L	0.400	4	6	8	8	3135-054
19B-2	Unloading'rings with pins, E	0.500	4	6	8	8	3135-173
19C-1	Washer - dia. 8/4,3 x 0,5	0.001	24	36	48	48	2114-001
19D-1	Spring for unloading ring	0.001	24	36	48	48	2142-034
19E-1	Tension spring - 342 mm	0.015	4	6	8	8	2142-048
19F-1	Ring plate for suction valve	0.035	4	6	8	8	3131-021
19G-1	Valve spring	0.001	24	36	48	48	2141-047
19H-1	Suction vaive retaining plate R717	1.400	4	6	8	8	3132-083
19H-2	Suction vaive retaining plate R12/R22	1.400	4	6	8	8	3132-095
19J-1	Guide ring for discharge valve	0.450	4	6	8	8	3134-008
19K-1	Gasket for cylinder liner - 0,5 mm	0.005	4	6	8	8	2356-111
19K-2	Gasket for cylinder liner - 0,8 mm	0.006	4	6	8	8	2356-233
19M-1	0-ring 107,55 x 3,53') TSMC HP	0.002				2	1331-085
19N-1	Socket cap screw M6 x 30	0.010	24	36	48	48	1413-343
19T-1	Gasket - dia. 163/141 x 0,2 mm	0.001	4	6	8	8	2353-140
	Discharge valve**)
20-1	Discharge valve - R717 - HP	1.200	4	6	8	2	3136-089
20-2	Discharge valve-R7l7-LP	1.200	4	6	8	6	3136-087
20-3	Discharge valve - HFC/HCFC - HP	1.200	4	6	8	2	3136-088
20-4	Discharge valve - HFC/HCFC - LP	1.200	4	6	8	6	3136-086
20-5	Discharge valve - HFC/HCFC - VHP	1.200	4	6	8		3136-085
20A-1	Discharge valve seat	0.250	4	6	8	8	3133-027
20B-1	Retaining plate - R717 - HP	1.000	4	6	S	2	3132-092
20B-2	Retaining plate - R717-LP	1.000	4	6	8	6	3132-085
20B-3	Retaining plate - HFC/HCPC - HP	1.000	4	6	8	2	3132-093
20B-4	Retaining plate - HFC/HCFC - LP	1.000	4	6	8	6	3132-091
20B-5	Retaining plate - HFC/HCFC - VHP	1.000	4	6	8	-	3132-082
20C-1	Ring plate	0.030	4	6	8	8	3131-015
20D-1	Special screw M 12x 60	0.055	4	6	8	8	1413-121
20E-1	Nut M12x 1,25	0.015	8	12	16	16	1432-075
20F-1	Spring guide	0.015	4	6	8	8	2145-008
20G-1	Vaive spring-R717- HP	0,001	32	4S	64	16	2141-047
20G-1	Valve spring-R717-LP	1.000	24	36	48	36	2141-047
20G-1	Valve spring - HFC/HCFC - HP	0.001	43	72	56	24	2141-047
20G-1	Valve spring - HFC/HCFC - LP	0.001	24	36	48	36	2141-047
20G-1	Valve spring - HFC/HCFC - VHP	0.001	64	96	128		2141-047

 

Compressors are fitted with disharge valves depending on the working conditions.
The valve is selected on the bisis of the refrigerant and the condensing/intermediate pressure temperature of
the plant, indicated in the tabie in 'C. For inst, R22 at TC=53'C=>VHP disharge valve.
Refri-gerant	Conditions	Valve type
R717	TC< 15°C	LP
	TC≥15°C	HP
HFC/  HCFC	TC <15°C	LP
	45°C R404A-R507   15°C≤ TC<50°C R22  70°C R134a	HP
	15°C≤ TC<50°C R22
	70°C R134a
	45°C  R404A-R507	VHP
	TC≥ 50°C R22
	70°C134a

 

Pos.	Designation	Weight each in kg	Number each compresssor				Part No
			SMC 104	SMC 106	SMC 108	TSMC 108
	Spring for safety head
21A-1	Spring	0.400	4	6	8	8	2142-060
	Oil pressure valve
22A-1	Oil pressure valve, complete	0.450	1	1	1	1	3142-150
22B-1	Gasket 90 x 44 x 1	0.001	1	1	1	1	2354-075
22C-1	Hexagon head screw M12 x 35	0.040	2	2	2	2	1424-216
	Oil charging valve
23A-1	Oil charging valve, complete	0.300	1	1	1	1	2412-585
23B-1	Threaded reducing nipple	0.155	1	1	1	1	2311-059
23C-1	Socket	0.075	1	1	1	1	2313-035
23D-1	Gasket	0.001	1	1	1	1	2356-123
23E-1	Gasket	0.001	1	1	1	1	2356-140
23F-1	Gasket	0.001	1	1	1	1	2356-283
23G-1	Nut	0.060	1	1	1	1	2313-027
	By-pass valves
24-1	By-pass valve dia. 20 22 bar TSMC108HP	2.400				1	3137-033
24-2	By-pass vaive dia. 20 24 bar TSMC 108 HP	2.400				1	3137-010
24-4	By-pass valve dia. 28 12 bar TSMC 108LP	3.600				1	3137-046
24-5	By-pass vaive dia. 28 22 bar SMC	3.600	1	1	1		3137-007
24-7	By-pass valve dia, 28 24 bar SMC	3.600	1	1	1		3137-009
24B-1	O-ring for cylinder*)	0.001				1	1331-065
24B-4	O-ring for cylinder*)	0.002	1	1	1	1	1331-067
24C-1	O-ring for cover*)	0.002				1	1331-069
24C-4	O-ring for cover *)	0.003	1	1	1	1	1331-071
24D-1	Hexagon head screw M8 x 25	0.015	4	4	4	8	1424-168
24E-1	Spring washer dia-14,2/8,2 x2	0.002	4	4	4	8	1437-023

 

Pos.	Designation	Weight each in kg	Valve dim.	Number each compresssor				Part No
				SMC 104	SMC 106	SMC 108	TSMC 108
	Stop valves
25-1	Complete valve, disharge KP		50				1	2414-073
25-2	Complete valve, inlet HP		50				1	2411-261
25-3	Complete valve, disharge LP		65	1	1	1	1	2414-069
25-4	Complete valve, inlet LP		100	1	1	1	1	2414-070
25A-1	Valve housing		50				1	2432-141
25A-2	Valve housing		50				1	2432-141
25A-3	Valve housing		65	1	1	1	1	2432-159
25A-4	Valve housing		100	1	1	1	1	2432-160-
25B-1	Valve bonnet	1.740	50-65	1	1	1	3	2433-028
25B-4	Valve bonnet	4.500	100	1	1	1	1	2433-030
25C-1	Front part for cone	0.095	50-65	1	1	1	3	2444-090
25C-3	Front part for cone	0.520	100	1	1	1	1	2444-094
25D-1	Rear part for cone	0.185	50-65	1	1	1	3	2444-091
25D-4	Rear part for cone	1.000	100	1	1	1	1	2444-095
25E-1	Screw for valve cone	0.020	50-65	1	1	1	3	2444-017
25E-4	Screw for valve cone	0.120	100	1	1	1	1	2444-018
25F-1	Gasket for screw dia.31/24 x1,5	0.0001	50-65	1	1	1	3	2356-138
25F-4	Gasket for screw dia, 36/28 x 1,5	0.001	100	1	1	1	1	2356-141
25G-1	Threaded connection	0.180	50-65	1	1	1	3	2445-053
25G-4	Threaded connection	0.400	100	1	1	1	1	2445-061
25H-1	Sealing ring dia. 62/45 x 3	0.004	50-65	1	1	1	3	2354-003
25H-4	Sealing ring dia. 110/90 x 3	0.020	100	1	1	1	1	2354-117
25J-1	Gasket for bonnet dia. 72,39 x 5.33	0.010	50-65	1	1	1	3	1331-154
25J-4	Gasket for bonnet dia. 116,84 x 7	0.015	100	1	1	1	1	1331-198
25K-1	Spindle	0.250	50-65	1	1	1	3	2442-023
25K-4	Spindle	0.480	100	1	1	1	1	2442-028
25L-1	Lock washer for spindle	0.010	50-65	1	1	1	3	2445-019
25L-4	Lock washer for spindle	0.015	100	1	1	1	1	2445-020
25M-1	Packing giand  Compl. with o-rings pos. 25R-1	0.120	50-65	1	1	1	3	2452-132
25M-4	Packing gland  Compl. with o-rings pos- 25R-4	0.250	100	1	1	1	1	2452-133
25N-1	Guide pin	0.002	50-65	1	1	1	3	1445-085
25N-4	Guide pin	0.002	100	1	1	1	1	1445-085
25P-1	0-ring dia. 21,8 x 3,5*)	0.002	50-65	1	1	1	1	1331-020
25P-4	0-ring dia. 28,2 x 3,5*)	0.002	100					1331-024
25Q-1	Nylon washer dia. 28.5/28 x 1,5	0.001	50-65	1	1	1	3	2354-018
25Q-4	Nylon washer dia. 48/34 y. 1,5	0.002	100	1	1	1	1	2354-017
25R-1	O-ring dia.17,12 x 3,5*)	0,001	50-65	2	2	2	2	1331-016
25R-4	O-ring dia.21.8 x 3,5	0.002	100	2	2	2	2	1331-020
25S-1	Hand wheel dia. 120	0.160	50-65	1	1	1	3	1365-036
25S-4	Hand wheel dia. 180	0.800	100	1	1	1	1	1365-035
25T-1	Screw for hand wheel M5 x 10	0.002	50-65	1	1	1	3	1424-140
25T-4	Screw for hand wheei M8 x 16	0.010	100	1	1	1	1	1424-166
25U-1	Washer for hand wheel	0.001	50-65	1	1	1	3	1436-024
25U-4	Washer for hand wheel	0.003	100	1	1	1	1	1436-026
25Y-3	Gasket for welding nipple	0.015	50-65	1	1	1	1	2356-087
25Y-4	Gasket for welding nipple	0.025	100	1	1	1	1	2356-104
25Z-1	Screw valve/compr. M14 x 40	0.050	50	4	4	4	4	1424-241
25Z-3	Screw vaive/cornpr. M14 x 45	0.050	65	4	4	4	4	1424-242
25Z-4	Screw vaive/cornpr. M16 x 45	0.095	100	4	4	4	4	1424-102
25AC-3	Counter flange		65	1	1	1	1	2344-019
25AC-4	Counter flange		100	1	1	1	1	2344-020
25AD-3	Welding nippie dia. 65		65	1	1	1	1	2322-103
25AD-4	Welding nipple dia. 100		100	1	1	1	1	2322-108
25AF-3	Threaded plug 3/4" BSP		65	1	1	1	1	2314-065
25AF-4	Threaded plug 3/4" BSP		100	1	1	1	1	2314-065
25AG-1	Gasket for valve/cornpr.	0.016	50					2354-105
25AG-3	Gasket for valve/compr.	0.016	65	1	1	1	1	2354-105
25AG-4	Gasket for valvs/compr	0.020	100					2354-106
25AH-3	Gasket for plug	0.002	65	1	1	1	1	2356-139
25AH-4	Gasket for piug	0,002	100	1	1	1	1	2356-139
25AJ-1	Screw bonnet/valve M10 x 25		50				8	1424-191
25AJ-2	Screw bonnet/valve M10 x 25		50				8	1424-191
25AJ-3	Screw bonnet/valve M10 x 25		65	8	8	8	8	1424-191
25AJ-4	Screw bonnet/valve M12 x 30	0.040	100	8	8	8	8	1424-215
25AK-3	Screw for counter flange M10 x 40	0.030	65	6	6	6	6	1424-194
25AK-4	Screw for counter flange M12 x 50	50	100	6	6	6	6	1424-219

 

Pos.	Designation	Weight each in kg	Number each compresssor				Part No
			SMC 104	SMC 106	SMC 108	TSMC 108
	Pressure gauges
	Suction and pressure gauge
30A-1	R717	1.640	1	1	1	1	1541-108
30A-2	Rl2,R22 and R502	1.620	1	1	1	1	1541-232
30A-3	R22.R134a and R404A	1.620	1	1	1	1	1541-074
30B-1	Nozzle and gasket dia.14/0,8 x 1,5	0.001	1	1	1	1	3146-013
30C-1	Gasket dia. 11/4x 1,5	0.001	1	1	1	1	2356-119
	SMC: discharge pressure gauge
31A-1	R717	1.380	1	1	1		1541-029
31A-2	R12,R22 and R502	1.400	1	1	1		1541-160
31A-3	R22,R134a and R404A	1.400	1	1	1		1541-075
31B-1	Nozzle and gasket dia. 14/0,8 x 1,5	0.001	1	1	1		3146-013
	TSMC: discharge pressure gauge
31A-3	R717	1.600				1	1541-101
31A-4	R12, R22 and R502	1.660				1	1541-161
31A-5	R22,Rl34aandR404A	1.660				1	1541-076
31B-1	Nozzle and gasket dia. 14/0,8 x 1,5	0.001				2	3146-013
31C-1	Screws for gauges M4 x 20		6	6	6	6	1412-350
	Oil filter
33-1	Oil filter complete		1	1	1	1	4524-039
33A-1	Filter element		1	1	1	1	1517-129
33B-1	Gasket		2	2	2	2	2356-202
33C-1	End cover		1	1	1	1	3422-150
33D-1	Rod for filler		1	1	1	1	2112-145
33E-1	Shield for oil filter		1	1	1	1	2158-209
33F-1	Bracket with connection		1	1	1	1	3422-152
33G-1	Distance piece		1	1	1	1	2212-136
33H-1	Rubber gasket		1	1	1	1	1334-012
33J-1	Magnet		3	3	3	3	1517-022
33K-1	iron ring		3	3	3	3	2114-038
33L-1	Washer dia, 17/8.4		1	1	1	1	1436-034
33M-1	Nut M 8		1	1	1	1	1433-073
33N-1	Washer dia-24/13		1	1	1	1	1436-036
33O-1	Nut M12		1	1	1	1	1433-075
33P-1	O-ring *)		1	1	1	1	1331-009
33Q-1	O-ring *)		1	1	1	1	1331-008
33R-1	Cutting ring joint		1	1	1	1	1349-131
	Suction filter
34A-1	Suction filter open, complete	0.365	2	2	2	1	3425-082
34A-2	Suction filter closed, complete	0.365				1	3425-084
34B-1	Filter bag	0.035	2	2	2	2	3425-083
34C-1	Inset for lifter bag	0.025	2	2	2	2	3424-058
34D-1	0-ring PRP 337 - 75,56 x 5,33 *)	0.008	2	2	2	3	1331-042
34E-1	Cover for suction filter	2.400	2	2	2	1	3422-103
34F-1	0-ring PRP 239 - 91,67 x 3,53 *)	0.003	2	2	2	1	1331-080
34G-1	Hexagon head screw M 12 x 40	0.050	8	6	8	4	1424-217
34H-1	Spring washer dia. 12	0.005	8	8	8	4	1437-026
	Discharge pipe for oil filter
38A-1	Discharge pipe for oil pump	0.500	1	1	1	1	3141-110
38B-1	Inside pipe connection to control	0.090	1	1	1	1	3141-162
	system (compr. without oil cooler)
38B-2	Inside pipe connection to control	0.090	1	1	1	1	3141-163
	system (compr. with OSSI oil cooler
	R717)
38B-3	Inside pipe connection to contro!	0.090	1	1	1	1	3141-164
	system (compr. with HE8 oH cooler
	HCFC)
38C-1	Connection for disharge pipe -	0.120	1				2333-025
	SMC 104
38C-2	Connection for disharge pipe -	0.190		1			2333-025
	SMC 106
38C-3	Connection for disharge pipe -	0.180			1	1	2333-026
	SMC 108 and TSMC 108
38D-1	O-ring PRP 212 - 21,80 x 3.53*)	0.002	2	2	2	2	1331-020
38E-1	O-ring PRP 321 - 29.51 x 5,33*)	0.004	1	1	1	1	1331-039
38F-1	Gasket dia- 27/21 x 1,5	0.001	1	1	1	1	2356-133
38G-1	O-ring dia. 26.58 x 3,5*)	0.002	1	1	1	1	1331-023
	Analogous control and safety
	equipment
39A-1	Gauge panel	0.070	1	1	1	1	3146-042
39B-1	Socket cap screw M10 x 60	0.045	2	2	2	2	1413-382
39C-1	Console		1	1	1	1	2213-142
39D-1	Bar for controls (4 controls)		1	1	1		2213-143
39D-2	Bar for controls (5 controls)		1	1	1	1	2213-144
390-3	Bar for controls (6 controls)		1	1	1	1	2213-145
39D-4	Bar for controls (7 controls)		1	1	1	1	2213-154
39D-5	Bar for controls (US, SMC)		1	1	1		2213-368
39D-6	Bar for controls (US, TSMC)					1	2213-369
39E-1	Hexagon head screw M6 x 12		2	2	2	2	1424-150
39F-1	Spring washer dia. 11/6		2	2	2	2	1437-022
39G-1	Socket cap screw M4 x 6						1412-200
39H-1	Spring washer dia. 7/4						1437-020
39J-1	Socket cap screw M5 x 10		4	4	4	4	1413-330
39K-1	Spring washer dia. 9/5		4	4	4	4	1437-021
	Cooling water connection  See section: Water cooling oi reciprocating compressor
40A-1	Set of hoses for cooling water SMC104	0.940	1				3185-154
40A-2	Set of hoses for cooling water SMC 106	1.000		1		1	3185-155
40A-3	Set of hoses for cooling water SMC l08 and TSMC108	1.400			1	1	3185-156
40B-1	Hose connection - 3/8" - straight	0.004	12	14	16	16	2334-025
40C-1	Anote - 3/8"	0.009	8	10	10	10	1341-090
40D-1	T-piece	0.015	2	2	2	2	1341-141
40E-1	Hose clamp	0.015	12	14	16	16	1345-168
40F-1	Cable binder		3	3	3	3	1554-062
	Purge valve
42A-1	Purge valve	0.300	1	1	1	2	2412-585
42B-1	Threaded nipple		1	1	1	1	1349-078
42C-1	Cutting ring	0.135	1	1	1	2	1349-062
42D-1	Nut
42E-1	Nut	0.070	1	1	1	2	2313-045
42F-1	Connection pipe with collar	0.025	1	1	1	2	2334-027
42G-1	Gasket	0.001	2	2	2	4	2356-123
42H-1	Nut	0.060	1	1	1	2	2313-027
	Pressure and temperature controls  Pressure controls for R717
45A-1	KP5A	0.300	1	1	1	1	1373-125
45B-1	KP15A	0.460	1	1	1	1	1373-142
45C-1	MP55A	0.900	1	1	1	1	1373-162
42F-1	Connection pipe with collar	0.025	1	1	1	1	2334-027
42G-1	Gasket	0.001	2	2	2	2	2356-123
42H-1	Nut	0.060	1	1	1	1	2313-027
	Pressure controls for R22, R134a and R404A
45D-1	KP5	0,3	1	1	1	1	1373-123
45E-1	KP15	0.460	1	1	1	1	1373-135
45F-1	MP55	0.800	1	1	1	1	1373-159
	Temperature controls:
45G-1	KP98	0.720	1	1	1	1	1373-043
45H-1	KP77	0.350	1	1	1	1	1373-044
45J-1	Phail pocket for temperature controls	0.770	1	1	1	1	1377-171
45K-1	Gasket		1	1	1	1	2356-133
	AMR 312 S coupling
48A-4	Disc pack	1.132	2	2	2	2	1524-157
48B-4	Bolt	0.054	16	16	16	16	1524-165
48С4	Bevel washer	0.010	4	4	4	4	1524-187
48D-4	Lock nut	0.018	16	16	16	16	1524-173
48E-4	Washer	0.008	16	16	16	16	1524-181
	Capacity regulation
50A-1	Valve body with 1 solenoid valve without coil		1				3143-383
50A-2	Valve body with 2 solenoid valves without coils			1		1	3143-384
50A-3	Valve body with 3 solenoid valves without coils				1		3143-385
50A-4	Valve body with 4 solenoid valves without coils					1	3143-386
50B-1	Coil 220/230V, 50/60 Hz. 10 W	0.260					1372-537
50B-2	Coil 110V, 50/60 Hz, 10W	0.260					1372-538
50B-3	Cod 240V, 50 Hz, 10 W	0.062					1372-539
50C	Solenoid vatve (service kit for one solenoid valve)						1372-424
	Crankcase heater
57A-1	Crankcase heater - 270 W - 115 V, 1 1/4" BSP		1	1	1	1	3181-034
57A-2	Crankcase heater - 270 W - 230 V, 1 1/4" BSP		1	1	1	1	3181-035
57A-3	Crankcase heater - 270 W - 250 V, 1 1/4" BSP		1	1	1	1	3181-036
57B-1	Gasket dia- 50/43 x 1,5 for 1 1/4" BSP	0.002	1	1	1	1	2356-150
80	Sofenoide valve blok, complete with  0.6 mm orifice for oil return. Excl. coil	2.040	1	1	1	1 or 2	1372-179
	Strainer kit consist of:		1	1	1	1 or 2	1372-089
80E	Strainer
80G	Al-gasket
	Service kit consist of:		1	1	1	1 or 2	1372-086
80P	Armature tube
80H	Armature
80K	O-ring
80M	O-ring
80L	Ai-gasket
80N	Snap fastener
	Seal kit consist of:		1	1	1	1 or 2	1372-091
80G	Al-gasket
80K	O-ring
80M	O-ring
80L	Al-gasket
80Q	Al-gasket
	Orifice kit 0,6 mm consist of:		1	1	1	1 or 2	1371-034
80L	At-gasket
80Q	At-gasket
80I	Orifice 0,6 mm
	Onftce kit 0,8 mm consist of:		1	1	1	1 or 2	1371-035
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 0.8 mm
	Orifice kit 1,0 mm consist of:		1	1	1	1 or 2	1371-036
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 1,0 mm
	Orifice kit 3.3 mm(for thermopump only) consist of:		1	1	1	1 or 2	1371-037
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 3.3 mm
80J-1	Coil 220/230V, 50/60 H2, 10 W	0.285					1372-537
80J-2	Coil 110V, 50/60 Hz, 10W	0.285					1372-538
80J-3	Coil 240 V, 50 Hz, 10W	0.285					1372-539
80J-4	Coil 24 V. SO Hz, 10 W	0.285					1372-541
	Intermediate pressure connections
90A-1	Mixing chamber with flange	9.500				1	3114-095
90B-1	Counter flange for mixing chamber	1.700				1	3115-084
90C-1	Intermediate ring	0.392				1	3422-100
90D-1	0-ring PRP 236 - 82,15 3.53 ')	0.002				1	1331-077
90E-1	0-ringPRP241 -98.02x3,5')	0.002				1	1331-081
90F-1	Hexagon head screw M12 x 65	0.065				4	1424-222
90G-1	Hexagon head screw Ml 4 x 55	0.065				4	1424-246
90H-1	Hexagon head screw Ml 4 x 55	0.005				4	1437-026
90J-1	Spring washer dia. 12	0.004				4	1437-030
90K-1	Spring washer dia. 14	0.025				4	1432-066
90L-1	Nut M14	0.003				1	1331-080
90M-1	0-ring PRP 239-91 ,67 x 3,53 *)	0.065				1	2313-027
90N-1	CapGasket dia. 18/10 x 1.5	0.002				1	2356-123
	Oil cooling - type HE8 S for R22
92A-1	Oil cooler		1	1	1	1	4242-038
92B-1	Stop valve 8MSL 10	0.300	1	1	1	1	1374-171
92C-1	Thermostatic expansion valve TX 2 - 0,5	0.400	1	1	1	1	1371-305
92D-1	Solenoid valve without coil	0.346	1	1	1	1	1372-422
92N-1	Coil 220/230V, 50/60 Hz, -10 W	0.260					1372-537
92N-2	Coil 110V, 50/60 Hz, 10W	0.260					1372-538
92N-3	Coil 240V, 50 Hz, 10W	0.260					1372-539
92E-1	Filter	0.320	1	1	1	1	4522-002
90F-1	Screwed connection GE 10-LR 1/4"	0.050	6	6	6	6	1349-051
92G-1	Single banjo connector DSVW 10-LR	0.160	1	1	1	1	1349-089
92H-1	Threaded nipple	0.110	1	1	1	1	2314-056
92J-1	Threaded plug for 8/6 mm pipe	0.015	2	2	2	2	2314-053
92K-1	Gasket dia. 19/14 x 1,5 - aluminium	0.001	2	2	2	2	2356-124
92L-1	Connection piece for 1 pipe dia. 8 mm	0.030	2	2	2	2	2333-021
92M-1	Gasket- dia. 27/21 x 1,5 - aluminium	0,001	3	3	3	3	2356-133
	Oil cooling - type OOSl for R717
93A-1	Oil cooler		1	1	1	1	4242-029
93B-1	Stop valve SN 6		1	1	1	1	2413-010
93C-1	Thermostatic injection TEAT 20-2	0.400	1	1	1	1	1371-240
93D-1	Solenoid valve without coil	0.346	1	1	1	1	1372-422
93N-1	Coil 220/230V. 50/60 Hz, 10 W	0.260					1372-537
93N-2	Coil 110V, 50/60 Hz, 10W	0.260					1372-538
93N-3	Coil 240V, 50Hz.Tow	0.260					1372-539
93E-1	Filter	0.320	1	1	1	1	4522-002
93F-1	Screwed connection GE 10-LR 1/4"	0.050	6	6	6	6	1349-051
93G-1	Single banjo connector DSVW 10-LR	0.160	1	1	1	1	1349-089
93H-1	Threaded nipple	0.110	1	1	1	1	2314-056
93J-1	Threaded piug for dia. 8/6 mm pipe	0.015	4	4	4	4	2314-053
93K-1	Gasket dia. 19/14 x 1.5 - alunimium	0.001	8	8	8	8	2356-124
93L-1	Connection piece for 1 pipe dia. 8 mm	0.030	4	4	4	4	2333-021
93M-1	Gasket dia. 27/21 x 1,5 - aluminium	0.001	3	3	3	3	2356-133
	Chain drive for oil pump
96A-1	Hub for chain wheel (chranshaft)		1	1	1	1	2126-020
96B-1	Hub for chain wheel (oil pump)		1	1	1	1	2126-019
96C-1	Chain wheel (crankshaft)		1	1	1	1	2126-018
96D-1	Chain wheel (oi! pump)		1	1	1	1	2126-017
96E-1	Chain		1	1	1	1	1521-102
96F-1	Hexagon head screw		5	5	5	5	1424-150
96G-1	Spring washer		5	5	5	5	1437-022
96H-1	Shield for oil		1	1	1	1	3141-128
98	Thermo pump
98A-1	Side cover for thermo pump		1	1	1	1	3113-145
98B-1	Monitor box		1	1	1	1	1553-215
	Alien screw M4 x 16		2	2	2	2	1412-204
	Spring washer dia. 4		2	2	2	2	1437-020
98C-1	Level indicator		2	2	2	2	3185-038
98D-1	Outer part for level indicator		2	2	2	2	3185-034
98E-1	Washer dia. 20/13x1.5		2	2	2	2	2356-125
98F-1	Rubber cap		2	2	2	2	1554-194
98G-1	Solenoid valve without coil		1	1	1	1	1372-422
98H-1	Solenoid valve without coil		1	1	1	1	1372-423
98J-1	Coil 220/230V, 50/60 Hz, 10 W	0,285					1372-537
98J-2	Coil 110V, 50/60 H2. 10W	0.285					1372-538
98J-3	Coil 240V. 50 Hz, 10W	0,285					1372-539
98K-1	Check valve		2	2	2	2	1364-008
	Straight joint 10 mm BSP		6	6	8	5	1349-051
	Socket 10 mm BSP		5	5	4	4	1349-101
	T-joint 10 mm		3	4	5	1	1349-041
	Strap for stop valve		1	1	1	1	2212-059
	Cable binder no. 10		1	1	1	1	1554-054
	Allen screw M4 x 12		2	2	2	2	1412-203
	Nut M4		2	2	2	2	1432-035
98L-1	Washer dia. 29/21 x 1,5		2	2	2	2	2356-136
98M-1	VA-joint with nozzle 1,2 mm		3	4	5		2314-097
98M-2	VA-joint with nozzle 0,6 mm					1	2314-100
	Angle joint		3	3	2	1	1349-033
	Angle swivel joint 8 mm		4	4	4		1349-087
	Angle swivel joint 10 mm		3	3	2	1	1349-089
	Angle joint 10 mm				1		1349-112
	Bushing 1/4" x 1/2" RG		2	1	1		2312-013
	Threaded nipple		1	1			2314-056
	Gasket dia. 27/21 x 1,5 Al		2	2	2		2356-133
	Gasket dia. l9/14 x 4 Al		3	3	3	1	2356-283
	Pipe strap dia. 10x15		2			1	1377-117
	Hexagon set screw M6 x 12		1			1	1424-150
	Nut M6		1				1432-061
	Allen screw M5 x 10					1	1413-330
	Washer dia. 12,5/6,4 x 1,6		2				1436-033
	Spring washer for M6					1	1437-021
98N-1	Filter		1	1	1	1	4522-002
98P-1	Stop valve.		1	1	1	1	2412-277
98Q-1	Cooling cover		1	1	1	1	3113-143
98R-1	Gasket for side cover		1	1	1	1	2353-189
98S-1	Hexagon head screw M14 x 80		16	16	16	16	1424-081
98T-1	Oil cooler OSSI		1	1	1	1	4242-029
	Socket 1/4"		1	1	1	1	1349-101
98U	Solenoid valve without coil		1	1	1		1372-422
98V	Solenoid valve without coii		1	1	1	1	1372-422
98AB-1	Coil 220/230V, 50/60 Hz, 10 W	0.285					1372-537
98AB-2	Coii 110V,  50/60 Hz. 10W	0.285					1372-538
98AB-3	Coil 240V, 50 Hz, 10 W	0.285					1372-539
98X	PT100 sensor		1	1	1	1	1373-253
98Y	Stop valve		1	1	1	1	2412-277
98Z	Non-return valve		1	1	1	1	1364-022
98AA	Screw joint		1	1	1	1	2314-105
	UNISAB
99A-1	Support for UNISAB		1	1	1	1	2213-500
99B-3	Distance washers		4	4	4	4	2212-130
99C-1	Screw for support M10 x 20		2	2	2	2	1424-190
99D-1	Screw for UNlSAB M6 x 20		4	4	4	4	1424-152
99E-1	Washers dia, 22/7 x 1,5		4	4	4	4	1436-025

 

Toots set for compressor

SMC 104-116 Mk3 & TSMC 108-116 Mk3. type S-L-E

Line no. A600 = Normal set, tools set no 3183-109

Line no. A601 = Extended set, tools set no 3183-110

Line no. A602A = Tools for coupling (SMC 104-108)

Line no. A602B =Toots for coupling (SMC 112-116)

Line no. A603 = Toots for alignment of coupling

 

Pos.No	Designation	Dimension	Line No					Part No
			A600	A601	A602		A603
					A	B
1-1	Clamp with screw, compr. type S and L		4	4				3183-144
1-2	Clamp with screw, compr. type E		4	4				3183-145
2	Tools for shaft seal		1	1				3183-139
3	Tommy screw for cylinder liner		2	2				3183-041
4	Theaded plug for unloading cylinder	3/8"BSP	2	2				2314-017
5	Supporting plate for pistons		8	8				3183-115
6	Spanner for heating cartridge	NV 55	1	1				3183-060
7	Trigger for coupling or belt pulley		1	1				3183-059
8	Adjusting jig for coupling					1		3183-105
9-1	Wrench for cylinder screw	NV 4		1
9-2	Wrench for cylinder screw	NV 5		1
9-3	Wrench for cylinder screw	NV 8		1
9-4	Wrench for cylinder screw	NV 10		1
9-5	Special wrench for shaft seal	NV 4		1				1612-392
10-1	Retaining-ring plier	J21/G		1
10-2	Retaining-ring plier	A11/G		1
11-1	Open end and ring spanner	NV 10		1
11-2	Open end and ring spanner	NV 17		1
11-3	Open end and ring spanner	NV 19		1
11-4	Open end and ring spanner	NV 22		1
11-5	Open end and ring spanner	NV 24		1
11-6	Open end and ring spanner	NV 27		1
13-1	Socket wrench	NV10		1
13-2	Socket wrench	NV13		1
13-3	Socket wrench	NV17		1
13-4	Socket wrench	NV19		1
13-5	Socket wrench	NV22		1
13-6	Socket wrench	NV24		1	1	1
13-7	Socket wrench	NV27		1
13-8	Socket wrench	NV30		1
13-9	Socket wrench	NV32		1
13-10	Socket wrench	NV9/16"		1
13-11	Socket wrench	NV 3/4"		1		1
13-12	Socket wrench	NV11/16"		1	1
14	Ratchet handle			1
15	Speed handle			1
16	Universal joint for socket wrench			1
17-1	Extension rod for socket wrench			1
17-2	Extension rod for socket wrench			1
19-1	Torque wrench 15-90 Nm			1
19-2	Torque wrench 40-200 Nm			1	1	1
20	Coupler for torque wrench 1/2			2	1	1
21-1	Open spanner for torque wrench	NV 11/16"		1	1
21-2	Open spanner for torque wrench	NV 3/4"		1		1
22	Feeler gauge						1	1

Spare parts for SMC 112-116 & TSMC116Mk3

Spare parts for SMC 112-116 & TSMC116Mk3
Type S-L and E
Relevant drawings lor compressor			SMC		TSMC
SMC 100 Mk 3, S-L-E (delivered after 89.10)			0661-523		0661-524
Cylinder liner ect. SMC-TSMC 112, 116 Mk3 (after 89.10)			0661-525
SMC 100 Mk3			0661-757		0661-758
Cylinder liner ect. SMC - TSMC 100 Mk3			0661-605
*) If the compressor runs as heat pump, this must be mentioned when ordering, to ensure a correct delivery
Pos-	Designation	Weight each in kg	Number each compressor			Part No
			SMC 112	SMC 116	TSMC 116
	Compressor frame
1A-1	Frame SMC 112	572.000	1			3111-071
1A-2	Frame SMC 116	560.000		1		3111-069
1A-3	Frame TSMC 116	560.000			1	3111-070
1B-1	Oil level glass dia. 80	0.230	2	2	2	1226-015
1C-1	O-ring PRP 137-52,07x 2,62*)	0.002	2	2	2	1331-140
1D-1	Hexagon head M6 x 18	0.010	8	8	8	1424-148
1E-1	Intermediate flange	0.010	1	1	1	2333-053
	Top cover - air cooled
2A-1	Top cover S-L	19.000	6	8	7	3113-191
2A-2	Top cover with flange S-L	20.500			1	3113-192
2A-3	Top cover E	19.000	6	8	7	3113-177
2A-4	Top cover with flange E	20.500			1	3113-176
2C-1	Gasket for top cover	0.020	6	8	8	2353-151
2E-1	Hexagon head M14 x 90	0.120	96	128	128	1424-083
2F-1	Hexagon head M14 x 12C	0.165			2	1424-090
2G-1	Washer for M14 dia. 28/15 x 2,5	0.010	96	128	128	1436-037
Pos-	Designation	Weight each in kg	Number each compressor			Part No
			SMC 112	SMC 116	TSMC 116
	Top cover - water cooled  (see sketch below)
2A-1	Top covers S-L	19.000	6	8	7	3113-191
2A-2	Top cover with flange S-L	20.500			1	3113-192
2A-3	Top cover E	19.000	6	8	7	3113-177
2A-4	Top cover with flange E	20.500			1	3113-176
2B-1	Water cover for cover with flange	5.800			1	3113-195
2B-2	Water cover left	5.800	3	4	4	3113-193
2B-3	Water cover right	5.800	3	4	3	3113-194
2C-1	Gasket for top cover	0.020	6	8	8	2353-151
2D-1	Gasket for water cover pos. 2B-1	0.020			1	2353-176
2D-2	Gasket for water cover pos. 2B-2/2B-3	0.020	6	8	7	2353-175
2E-2	Hexagon head screw M14 x 110	0.150	96	128	128	1424-087
2F-1	Hexagon head screw M14 x 120	0.165			2	1424-090
2G-1	Washer for M14, dia. 28/15 x 2,5	0.010	96	128	128	1436-037
2H-1	Hexagon head screw M10 x 35	0.050	12	16	16	1424-193
2J-1	Washer for M 10, dia. 21 /10,5 x 2	0.008	12	16	16	1436-035
	Side cover - air cooled
3A-1	Side cover	10.900	4	4	4	3113-148
3C-1	Gasket for side cover	0.020	4	4	4	2353-151
3E-1	Hexagon head screw M14 x 65	0.045	64	64	64	1424-246
3G-1	Washer for M14, dia. 28/15 x 2,5	0.010	64	64	64	1436-037
	Side cover - water cooled
3A-2	Side cover with cooling fins	15.000	4	4	4	3113-140
3B-1	Water cover	5.800	4	4	4	3113-138
3C-1	Gasket for side cover	0.020	4	4	4	2353-151
3D-1	Gasket for water cover	0.020	4	4	4	2353-154
3E-2	Hexagon head screw M14 x 55	0.065	56	56	56	1424-244
3F-1	Hexagon head screw M14 x 35	0.045	8	8	8	1424-240
3G-1	Washer for M14, dia. 28/15 x 2.5	0.010	64	64	64	1436-037
3H-1	Hexagon head screw M12 x 40	0.050	4	4	4	1424-217
3J-1	Washer for M12, dia. 24/13 x 2,5	0.008	4	4	4	1436-036
	End cover at pump end
4A-1	End cover	17.950	1	1	1	3113-028
4B-1	Gasket	0.020	1	1	1	2353-011
4C-1	Hexagon head screw M14 x 100	0.150	14	14	14	1424-085
4D-1	Washer for M14 dia. 28/15 x 2,5	0.010	14	14	14	1436-037
	Bearing cover at pump end
5A-1	Bearing cover	9.100	1	1	1	3113-031
5B-1	Hexagon head screw M14 x 35	0.055	6	6	6	1424-240
5C-1	Bushing	1.200	1	1	1	2132-021
5C-2	Bushing for repair (0,5 mm undersize)	1.220	1	1	1	2132-022
5D-1	Gasket - 0,3 mm	0.005	1	1	1	2353-013
5D-2	Gasket - 0,5 mm	0.006	1	1	1	2353-100
5D-3	Gasket - 0,75 mm	0.010	1	1	1	2353-014
5D-4	Gasket -1,0 mm	0.015	1	1	1	2353-015
	Bearing cover at shaft seal end
6A-1	Bearing cover	23.000	1	1	1	3113-124
6B-1	Hexagon head screw M14 x 60	0.085	14	14	14	1424-245
6C-3	Bushing	1.200	1	1	1	2132-021
6C-4	Bushing for repair (0,5 mm undersize)	1.200	1	1	1	2132-022
6D-1	Gasket	0.020	1	1	1	2353-011
6E-1	Washer for M14, dia. 28/15 x 2,5	0.010	14	14	14	1436-037
6F	Valve for prelubrication		1	1	1	2412-585
6G	Nut		1	1	1	2313-045
6H	Special joint		1	1	1	2334-027
6J	Cap		1	1	1	2313-027
6K	Joint 3/8"		1	1	1	1349-053
6L	Alu gasket		1	1	1	2356-123
	Shaft seal type SB100  Revision 1 for compressor nos. up to 98379
	Spare parts kit:		1	1	1	3184-225
	Consist of: - see Revision 3
	Revision 2 for compressor nos. after 98379 incl.
	Spare parts kit:		1	1	1	3126-178
10E-2	Consist of:  Slide ring, steel		1	1	1
10F-1	Slide ring, carbon		1	1	1
10D-1	O-ring dia. 75,79 x 3,53		1	1	1
10G-2	Sealing ring		1	1	1
10J-1	Hex. socket screw M5 x 16		4	4	4
13	Allen key - NV 4 x 90 x 90		1	1	1
8B-1	Gasket for cover		1	1	1
	Mounting instruction					0171-934
	Revision 3
	Spare parts kit:		1	1	1	3184-225
10E-1	Consist of:  Slide ring, steel		1	1	1
10F-1	Slide ring, carbon		1	1	1
10D-1	O-ring dia. 75,79 x 3,53		1	1	1
10G-1	O-ring dia. 82,14x3,53		1	1	1
10J-1	Hex. socket screw M5 x 16		4	4	4
13	Alien key - NV 4 x 90 x 90		1	1	1
8B-1	Gasket for cover		1	1	1
	Mounting instruction					0171-930
	Shaft seal complete: SMC/TSMC 100		1	1	1	3184-226
	Consist of:
8A-2	Cover (SMC/TSMC 100)		1	1	1	3113-175
8B-1	Gasket for cover		1	1	1	2353-005
8C-1	Hex. head screw M10 x 40 - DIN 933		6	6	6	1424-194
	Allen key - NV 4 x 90 x 90		1	1	1	1612-392
8D-1	Hose connection 1/4"		1	1	1	1345-143
8E-1	PVC hose 3/16" x 400					1241-190
8F-1	Spirolox ring dia. 76		1	1	1	1437-295
8G-1	Lock spring		1	1	1	3126-169
8H-1	Groover pin dia. 4 x 20		1	1	1	1446-081
10A-1	Retaining flange		1	1	1	3126-166
10B-1	Spring		10	10	10	2142-058
10D-1	O-ring dia. 75,79 x 3,53		1	1	1	1331-075
10E-2	Slide ring, steel		1	1	1	3126-167
10F-1	Slide ring, carbon		1	1	1	3126-168
10G-1	O-ring dia. 82,14 x 3,53		1	1	1	1331-077
10H-1	Locking ring		1	1	1	3126-153
10J-1	Hex. socket screw M5 x 16		4	4	4	1413-329
	Oil pump
11-1	Oil pump complete	2.400	1	1	1	3141-004
	Contains:
	-Oil pump
	11J-Lock nut, M10x 10,7
	11L - Washer for M10 dia. 21/10,5 x 2
	11N-Key 5 x 5 x 12
	11P-Gasket dia. 32/27x1,5
	11S - Threaded nipple
11G-1	Gear whell for pump pinion	0.660	1	1	1	3141-046
11H-1	Gear wheel for crank shaft	0.530	1	1	1	3141-047
11M-1	Hexagon head screw M6 x 25	0.010	4	4	4	1424-153
11Q-1	Hexagon head screw M12 x 30	0.040	2	2	2	1424-215
11R-1	Spring washer dia. 12	0.002	2	2	2	1437-081
11T-1	Spring washer- dia. 11,1/6,1 x 1.6	0.005	4	4	4	1437-022
	Unloading cylinder
12-1	Unloading cylinder  Complete L=75, S=21,5	1.765	1	1	1	3135-149
12-2	Unloading cylinder  Complete L=100, S=46,5	1.790	1	1	1	3135-150
12-3	Unloading cylinder  Complete L=125, 8=71,5	1.815		1	1	3135-151
12-4	Unloading cylinder  Complete L=150, S=96,5	1.840			1	3135-152
12-5	Unloading cylinder (HP)  Complete L=82, S=24,5	1.800				3135-161
12A-1	Unloading cylinder  (SMC and TSMC LP)	1.700	2	3	4	3135-147
12A-2	Unloading cylinder (TSMC HP)	1.800				3135-148
12B-1	Piston	0.220	2	3	4	3135-034
12C-1	Piston rod 75 mm (SMC only)	0.065	1	1	1	3135-041
12C-2	Piston rod 100 mm	0.090	1	1	1	3135-042
12C-3	Piston rod 125 mm	0.115		1	1	3135-043
12C-4	Piston rod 150 mm	0.140			1	3135-044
12C-5	Piston rod 82 mm, grounded  (TSMC HP only)	0.090				3135-140
12D-1	Threaded plug - 3/8" BSP	0.065	2	3	4	2314-025
12E-1	Gasket - dia. 25/17x1,5	0.002	2	3	4	2356-130
12F-1	Seeger ring dia. 52 (SMCandTSMCLP)	0.008	2	3	4	1437-155
12G-1	Spring guide	0.040	2	3	4	2145-004
12H-1	Spring retainer (SMC and TSMC LP)	0.110	2	3	4	3135-057
12J-1	Spring (outer)	0.065	2	2	4	2142-056
12J-2	Spring (inner)	0.035	2	3	4	2142-055
12K-1	Benzing ring - dia. 9 mm	0.002	2	3	4	1437-105
12K-2	Benzing ring - dia. 7 mm (SMCandTSMCLP)	0.001	2	3	4	1437-103
12L-1	Hexagon head screw M10 x 30	0.030	8	12	16	1424-192
12M-1	Cover (TSMC HP only)	0.800			1	3135-105
12N-1	Gasket for cover (TSMC HP only)	0.010			1	2353-025
12P-1	Look nut - UNF 3/8" (TSMC HP only)	0.010			1	1433-100
12Q-1	Socket cap screw M4 x 16  (TSMC HP only)	0.010			6	1413-007
12R-1	O-ring PRP 112 12,37x2.62  (TSMC HP only)*)	0.001			1	1331-013
12S-1	Gasket 100 x 100 x 2	0.010	8	8	8	2354-023
	Frame for unloading mechanism
	Frame complete incl. pos. 13E-1					3184-216
13A-1	Suspension rod	0.290	6	8	8
13B-1	Suspension rod	0.290	6	8	8
13C-1	Cross piece	0.330	6	8	8
13D-1	Cross piece	0.330	6	8	8
13E-1	Countersunk screw M6 x 16	0.020	24	32	32	1413-092
	Bracket for unloading mechanism
14A-1	Bracket with pin	0.065	12	16	14	3135-060
14B-1	Spacing ring	0.005	24	32	28	2124-003
14C-1	Hexagon head screw M6 x 30	0.010	24	32	28	1424-154
14D-1	Spring washer - dia. 6	0.005	24	32	28	1437-022
	Rocker for unloading mechanism
15A-1	Rocker	0.050	24	32	32	3135-096
15B-1	Bearing for SMC and TSMC LP	0.006	24	32	24	3135-099
15B-2	Bearing for TSMC HP	0.006			8	3135-101
15C-1	Spring retainer	0.001	24	32	32	2145-001
15D-1	Spring	0.007	24	32	32	2142-061
15E-1	Washer for bearing cup - 0,5 mm	0.001				2114-003
	Crankshaft - all without certificate
16A-7	Crankshaft for SMC 112S, complete	88.800	1			3121-022
16A-8	Crankshaft for SMC 116S  and TSMC 116S, complete	91.400		1	1	3121-023
16A-9	Crankshaft for SMC 112L, complete	92.000	1			3121-107
16A-10	Crankshaft for SMC 116L  and TSMC 116L, complete	100.400		1	1	3121-108
16A-14	Crankshaft for SMC 112E, complete		1			3121-216
16A-15	Crankshaft for SMC 116E  and TSMC 116E, complete			1	1	3121-217
16B-1	Plain washer with pin	0.800	1	1	1	2125-084
16C-1	Key-18 x 11x 55	0.080	1	1	1	2123-005
16D-1	Hexagon head screw M16 x 55	0.050	1	1	1	1424-104
16E-1	Spring washer - dia. 16	0.004	1	1	1	1437-027
16F-1	Plug M 12 S-type	0.010	4	4	4	1413-260
16F-2	Plug 1/4"L-type	0.010	4	5	5	1343-141
	Connecting rod
17-1	Connecting rod, complete  SMC and TSMC LP	2.300	12	16	12	3123-004
17-2	Connecting rod. completeTSMC HP	2.700			4	3123-006
17A-1	Half-section of bearing	0.080	24	32	32	2133-003
17A-2	Half-section of bearing  (0,5 mm undersize)	0.080	24	32	32	2133-004
17B-1	Bushing for piston pin  SMC and TSMC LP	0.200	12	16	12	2132-004
17B-2	Needle bearing TSMC HP	0.200			4	1511-275
17C-1	Bolt for connecting rod	0.055	24	32	32	2111-068
17D-1	Lock nut - 3/8" UNF	0.010	24	32	32	1433-116
	Piston with pin and rings
18-1	Piston with pin and rings S	1.320	12	16	16	3124-002
18-2	Piston with pin and rings L	1.320	12	16	16	3124-052
18-3	Piston with pin and rings E	1.320	12	16	16	3124-065
18A-1	Piston pin	0.500	12	16	16	3125-084
18B-1	Piston ring	0.025	24	32	32	3125-130
18C-1	Oil scraper rings	0.030	12	16	16	3125-065
18D-1	Seeger-ring - dia. 40  (inside diameter)	0.005	24	32	32	1437-150
	Cylinder liner with sction valve
19-1	Cylinder liner with suction valve  R717, SMC - TSMC LP, S and L	4.100	12	16	12	3112-085
19-5	Cylinder liner with suction valve  R717, SMC- TSMC LP, E	4.500	12	16	12	3112-081
19-2	Cylinder liner with suction valve  HFC/HCFC, SMC - TSMC LP, S and L	4.100	12	16	12	3112-086
19-3	Cylinder liner with suction valve  R717. SMC - TSMC HP, S and L	4.100			4	3112-087
19-6	Cylinder liner with suction valve  R717, SMC-TSMC HP, E	4.500			4	3112-097
19-4	Cylinder liner with suction valve  HFC/HCFC, TSMC HP, S and L	4.100			4	3112-088
19A-1	Cylinder liner S and L	3.500	12	16	16	3112-065
19A-2	Cylinder liner, E	4.000	12	16	16	3112-080
19B-1	Unloading rings with pins, S and L	0.400	12	16	16	3135-054
19B-2	Unloading rings with pins, E	0.500	12	16	16	3135-173
19C-1	Washer-dia. 8/4,3x0.5	0.001	72	96	96	2114-001
19D-1	Spring for unloading ring	0.001	72	96	96	2142-034
19E-1	Tension spring - 342 mm	0.015	12	16	16	2142-048
19F-1	Ring plate for suction valve	0.035	12	16	16	3131-021
19G-1	Valve spring	0.001	72	96	96	2141-047
19H-1	Suction valve retaining plate R717	1.400	12	16	16	3132-083
19H-2	Suction valve retaining plate R12/R22	1.400	12	16	16	3132-084
19J-1	Guide ring for discharge valve	0.450	12	16	16	3134-008
19K-1	Gasket for cylinder liner - 0,5 mm	0-005	12	16	16	2356-111
19K-2	Gasket for cylinder liner - 0,8 mm	0.006	12	16	16	2356-233
19M-1	O-ring 107,55 x 3,53*) TSMC HP	0.002			4	1331-085
19N-1	Socket cap screw M6 x 30	0.010	72	96	96	1413-343
19T-1	Gasket - dia. 163/141 x 0,2 mm	0.001	12	16	13	2353-140
	Discharge valve**)
20-1	Disharge valve - R717 - HP	1.200	12	16	4	3136-089
20-2	Disharge valve - R717 - LP	1.200	12	16	12	3136-087
20-3	Disharge valve - HFC/HCFC - HP	1.200	12	16	4	3136-088
20-4	Disharge valve - HFC/HCFC - LP	1.200	12	16	12	3136-086
20-5	Disharge valve - HFC/HCFC - VHP	1.200	12	16		3136-085
20A-1	Disharge valve seat	0.250	12	16	16	3133-027
20B-1	Retaining plate - R717 - HP	1.000	12	16	4	3132-092
20B-2	Retaining plate - R717 - LP	1.000		16	12	3132-090
20B-3	Retaining plate - HFC/HCFC - HP	1.000	12	16	4	3132-093
20B-4	Retaining plate - HFC/HCFC - LP	1.000	12	16	12	3132-091
20B-5	Retaining plateHFC/HCFC - VHP	1.000	12	16		3132-094
20C-1	Ring plate	0.030	12	16	16	3131-015
20D-1	Special screw M12 x 60	0.055	12	16	16	1413-121
20E-1	Nut M12 x 1,25	0.015	24	32	32	1432-075
20F-1	Spring guide	0.015	12	16	16	2145-008
20G-1	Valve spring - R717-HP	0.001	96	128	32	2141-047
20G-1	Valve spring - R717 - LP	0.001	72	96	72	2141-047
20G-1	Valve spring - HFC/HCFC - HP	0.001	144	192	48	2141-047
20G-1	Valve spring - HFC/HCFC - LP	0.001	72	96	72	2141-047
20G-1	Valve spring - HFC/HCFC - VHP	0.001	192	256		2141-047
	**)  Compressors are fitted with disharge valves depending on the working conditions.
	The valve is selected on the bisis of the refrigerant and the condensing/intermediate
	pressure temperature of the plant, indicated in the table in °C.
	For inst. R22 at TC=53°C=>VHP disharge valve.
Refri-gerant	Conditions	Valve  type
R717	TC < 15°C	LP
	TC > 15°C	HP
HFC/  HCFC	TC < 15°C	LP
	45°C R404A-R507  15°C ≤ TC< 50°CR22  70°CR134a	HP
	45°C R404A-R507  TC≥ TC< 50°CR22  70°CR134a	VHP
Pos-	Designation	Weight each in kg	Number each compressor			Part No
			SMC 112	SMC 116	TSMC 116
	Spring for safety head
21-1	Spring	0.400	12	16	16	2142-060
	Oil pressure valve
22A-1	Oil pressure valve, complete	0.450	1	1	1	3142-150
22B-1	Gasket 90 x 44 x 1	0.001	1	1	1	2354-075
22C-1	Hexagon head screw M12 x 35	0.040	2	2	2	1424-216
	Oil charging valve
23A-1	Oil charging valve, complete	0.300	1	1	1	2412-585
23B-1	Threaded reducing nipple	0.155	1	1	1	2311-059
23C-1	Socket	0.075	1	1	1	2313-035
23D-1	Gasket	0.001	1	1	1	2356-123
23E-1	Gasket	0.001	1	1	1	2356-140
23F-1	Gasket	0.001	1	1	1	2356-283
23G-1	Nut	0.060	1	1	1	2313-027
	By-pass valves
24-1	By-pass valve dia. 28 12 bar	3.600			2	3137-018
24-2	By-pass valve dia. 28 22 bar	3.600	2	2	1	3137-007
24-3	By-pass valve dia. 28 24 bar	3.600	2	2	1	3137-009
24B-1	O-ring for cylinder *)	0.002	2	2	3	1331-067
24C-1	O-ring for cover *)	0.002	8	8	3	1331-071
24D-1	Hexagon head screw M8 x 25	0.015			8	1424-168
24D-2	Hexagon head screw M8 x 50	0.025	8	8	4	1424-173
24E-1	Spring washer dia. 14,2/8,2 x 2	0.002			12	1437-023
24F-2	Intermediate piece				1	2469-002

 

Pos.	Designation	Weight each  in kg	Valve dim.	Number each comprassor			Part no.
				SMC 112	SMC  116	SMC  116
	Stop valves
25-3	Complete valve, disharge HP		65			1	2414-069
25-4	Complete valve, inlet HP		80			1	2411-263
25-5	Complete valve, disharge LP		100	1	1	1	2414-070
25-6	Complete valve, inlet LP		125	1	1	1	2414-048
25A-3	Valve housing		65			1	2432-159
25A-4	Valve housing	3.200	80			1	2432-143
25A-5	Valve housing		100	1	1	1	2432-160
25A-6	Valve housing		125	1	1	1	2432-110
25B-3	Valve bonnet	1.740	65			1	2433-028
25B-4	Valve bonnet	3.200	80			1	2433-029
25B-5	Valve bonnet	4.500	100	1	1	1	2433-030
25B-6	Valve bonnet	8.700	125	1	1	1	2433-008
25C-3	Front part for cone	0.095	65		1	1	2444-090
25C-4	Front part for cone	0.028	80		1	1	2444-092
25C-5	Front part for cone	0.520	100	1	1	1	2444-094
25C-6	Front part for cone	0.520	125	1	1	1	2444-005
25D-3	Rear part for cone	0.185	65		1	1	2444-091
25D-4	Rear part for cone	0.440	80		1	1	2444-093
25D-5	Rear part for cone	1.000	100	1	1	1	2444-095
25D-6	Rear part for cone	1.650	125	1	1	1	2444-013
25E-3	Screw for valve cone	0.020	65			1	2444-017
25E-4	Screw for valve cone	0.120	80			1	2444-018
25E-5	Screw for valve cone	0.120	100	1	1	1	2444-018
25E-6	Screw for valve cone	0.120	125	1	1	1	2444-018
25F-3	Gasket for screw dia. 31/24 x 1,5	0.001	65			1	2356-138
25F-4	Gasket for screw dia. 34/27 x 1,5	0.001	80			1	2356-141
25F-5	Gasket for screw dia. 34/27 x 1,5	0.001	100	1	1	1	2356-141
25F-6	Gasket for screw dia. 34/27 x 1,5	0.001	125	1	1	1	2356-141
25G-3	Threaded connection	0.180	65			1	2445-053
25G-4	Threaded connection	0.340	80			1	2445-060
25G-5	Threaded connection	0.400	100	1	1	1	2445-061
25G-6	Threaded connection	0.650	125	1	1	1	2445-009
25H-3	Sealing ring dia. 62/45 x 3	0.004	65			1	2354-003
25H-4	Sealing ring dia. 85/66 x 3	0.015	80			1	2354-115
25H-5	Sealing ring dia. 110/91 x 3	0.020	100	1	1	1	2354-117
25H-6	Sealing ring dia. 133/110 x 3	0.030	125	1	1	1	2354-118
25J-3	Gasket for bonnet dia. 72,39 x 5,33	0.010	65			1	1331-154
25J-4	Gasket for bonnet dia. 94,62 x 5,33	0.015	80			1	1331-161
25J-5	Gasket for bonnet dia. 116,84 x 7	0.020	100	1	1	1	1331-198
25J-6	Gasket for bonnet dia. 167,5/148 x 2	0.003	125	1	1	1	1331-112
25K-3	Spindle	0.250	65			1	2442-023
25K-4	Spindle	0.420	80			1	2442-030
25K-5	Spindle	0.480	100	1	1	1	2442-028
25K-6	Spindle	0.700	125	1	1	1	2442-025
25L-3	Lock washer for spindle	0.010	65			1	2445-019
25L-4	Lock washer for spindle	0.015	80			1	2445-020
25L-5	Lock washer for spindle	0.015	100	1	1	1	2445-020
25L-6	Lock washer for spindle	0.015	125	1	1	1	2445-020
25M-3	Packing gland Compl. with o-rings	0.120	65			1	2452-073
25M-4	Packing gland Compl. with o-rings	0.250	80			1	2452-004
25M-5	Packing gland Compl. with o-rings	0.250	100	1	1	1	2452-004
25M-6	Packing gland Compl. with o-rings	0.250	125	1	1	1	2452-004
25N-3	Guide pin	0.002	65			1	1445-085
25N-4	Guide pin	0.002	80			1	1445-085
25N-5	Guide pin	0.002	100	1	1	1	1445-085
25N-6	Guide screw	0.006	125	1	1	1	2111-035
25P-3	O-ring dia. 21,8x3,5*)	0.002	65			1	1331-020
25P-4	O-ring dia. 28,2 x 3,5*)	0.002	80			1	1331-024
25P-4	O-ring dia. 28,2 x 3,5*)	0.002	100	1	1	1	1331-024
25P-6	O-ring dia. 28,2 x 3,5*)	0.002	125	1	1	1	1331-024
25Q-3	Nylon washer dia. 39,5/28 x 1,5	0.001	65			1	2354-018
25Q-4	Nylon washer dia. 34/22 x 1,5	0.002	80			1	2354-017
25Q-5	Nylon washer dia. 34/22 x 1,5	0.002	100	1	1	1	2354-017
25Q-6	Nylon washer dia, 34/22 x 1,5	0.002	125	1	1	1	2354-017
25R-3	O-ring dia. 17,12x2,62*)	0.001	65		2	2	1331-016
25R-4	O-ring dia. 21,8x3,5	0.002	80		2	2	1331-020
25R-5	O-ring dia. 21,8x3,5	0.002	100	2	2	2	1331-020
25R-6	O-ring dia. 21,8x3,5	0.002	125	2	2	2	1331-020
25S-3	Hand wheel dia. 120	0.160	65			1	1365-036
25S-4	Hand wheel dia. 140	0.400	80			1	1365-033
25S-5	Hand wheel dia. 180	0.800	100	1	1	1	1365-035
25S-6	Hand wheel dia. 180	0.800	125	1	1	1	1365-035
25T-3	Screw for hand wheel M5 x 10	0.002	65			1	1424-140
25T-4	Screw for hand wheel M8 x 16	0.010	80			1	1424-166
25T-5	Screw for hand wheel M8 x 16	0.010	100	1	1	1	1424-166
25T-6	Screw for hand wheel M8 x 16	0.010	125	1	1	1	1424-166
25U-3	Washer for hand wheel	0.001	65			1	1436-024
25U-4	Washer for hand wheel	0.003	80			1	1436-026
25U-5	Washer for hand wheel	0.003	100	1	1	1	1436-026
25U-6	Washer for hand wheel	0.003	125	1	1	1	1436-026
25V-6	Spring washer dia. 14,2/8,2 x 2	0.002	125			1	1437-023
25Y-3	Gasket for welding nipple dia. 90/68 x 2	0.015	65			1	2356-087
25Y-4	Gasket for welding nipple dia. 130/95x2	0.025	100	1	1	1	2356-104
25Y-6	Gasket for welding nipple dia. 155/125x2	0.025	125	1	1	1	2356-109
25Z-3	Screw valve/compr. M14 x 45	0.050	65			4	1424-242
25Z-4	Screw valve/compr. M16 x 45	0.095	100	4	4	4	1424-102
25Z-6	Screw valve/compr. M16 x 100	0.170	125	6	6	6	1424-268
25AC-3	Counter flange		65			1	2344-019
25AC-4	Counter flange		100	1	1	1	2344-020
25AC-6	Counter flange	3.600	125	1	1	1	2344-006
25AD-3	Welding nipple dia. 65		65			1	2322-103
25AD-4	Welding nipple dia. 100		100	1	1	1	2322-108
25AD-6	Welding nipple dia. 125		125	1	1	1	2322-110
25AF-3	Threaded plug 3/4" BSP		65			1	2314-065
25AF-4	Threaded plug 3/4" BSP		100	1	1	1	2314-065
25AG-3	Gasket for valve/compr.	0.016	65			1	2354-105
25AG-4	Gasket for valve/compr.	0.020	100	1	1	1	2354-106
25AG-6	Gasket for valve/compr.	0.040	125	1	1	1	2354-080
25AH-3	Gasket for plug	0.002	65			1	2356-139
25AH-4	Gasket for plug	0.002	100	1	1	1	2356-139
25AJ-3	Screw bonnet/valve M10 x 25		65			8	1424-191
25AJ-4	Screw bonnet/valve M10 x 25		80			8	1424-191
25AJ-5	Screw bonnet/valve M20 x 30	0.040	100	8	8	8	1424-215
25AJ-6	Screw bonnet/valve M16 x 60	0.100	125	6	6	6	1424-260
25AK-3	Screw for counter flange M10 x 40	0.030	65			6	1424-194
25AK-4	Screw for counter flange M12 x 50	0.050	100			6	1424-219
25AK-4	Screw for counter flange M16 x 65	0.100	125	6	6	6	1424-106

 

Pos.	Designation	Weight each in kg	Number each compressor			Part No
			SMC 112	SMC 116	TSMC 116
	Pressure gauges  Suction and pressure gauge
30A-1	R717	1.640	1	1	1	1541-108
30A-2	R12,R22 and R502	1.620	1	1	1	1541-232
30A-3	R22,R134a and R404A	1.620	1	1	1	1541-074
30B-1	Nozzle and gasket dia. 14/0,8 x 1,5	0.001	1	1	1	3146-013
30C-1	Gasket dia. 11/4x1,5	0.001	1	1	1	2356-119
	SMC: discharge pressure gauge
31A-1	R717	1.380	1	1	1	1541-029
31A-2	R12,R22 and R502	1.400	1	1	1	1541-160
31A-3	R22,R134a and R404A	1.400	1	1	1	1541-075
31B-1	Nozzle and gasket dia. 14/0,8 x 1,5	0.001	1	1	1	3146-013
	TSMC: disharge pressure gauge
31A-3	R717	1.600			1	1541-101
31A-4	R12,R22 and R502	1.660			1	1541-161
31A-5	R22,R134a and R404A	1.660			1	1541-076
31B-1	Nozzle and gasket dia. 14/0,8 x 1,5	0.001			2	3146-013
31C-1	Screws for gauges M4 x 20		6	6	6	1412-350
	Oil filter
33-1	Oil filter complete		1	1	1	4524-039
33A-1	Filter element		1	1	1	1517-125
33B-1	Gasket		2	2	2	2356-202
33C-1	End cover		1	1	1	3422-150
33D-1	Rod for filter		1	1	1	2112-145
33E-1	Shield for oil filter		1	1	1	2158-209
33F-1	Bracket with connection		1	1	1	3422-152
33G-1	Distance piece		1	1	1	2212-136
33H-1	Rubber gasket		1	1	1	1334-012
33J-1	Magnet		3	3	3	1517-022
33K-1	Iron ring		3	3	3	2114-038
33L-1	Washer dia. 17/8,4		1	1	1	1436-034
33M-1	NutM8		1	1	1	1433-073
33N-1	Washer dia. 24/13		1	1	1	1436-036
330-1	Nut M12		1	1	1	1433-075
33P-1	O-ring *)		1	1	1	1331-009
33Q-1	O-ring *)		1	1	1	1331-008
33R-1	Cutting ring joint		1	1	1	1349-131
	Suction filter
34A-1	Suction filter open, complete	0.660	2	2	1	3425-093
34A-2	Suction filter closed, complete	0.870			1	3425-095
34B-1	Filter bag	0.035	2	2	2	3425-096
34C-1	Inset for filter bag	0.040	2	2	2	3424-061
34D-1	O-ring PRP 346 -104,1 x 5,33 *)	0.012	2	2	3	1331-164
34E-1	Coverfor suction filter	4.160	2	2	1	3422-114
34F-1	O-ring PRP 248 -120,24 x 3,53 *)	0.006	2	2	1	1331-089
34G-1	Hexagon head screw M 16 x 45	0.095	8	8	4	1424-102
34H-1	Spring washer dia. 26,2/16,2 x 3,5	0.004	8	8	4	1437-027
	Discharge pipe for oil filter
38A-1	Discharge pipe for oil pump	0.500	1	1	1	3141-110
38B-1	Inside pipe connection to control system (compr. without oil cooler)	0.090	1	1	1	3141-162
38B-2	Inside pipe connection to control system (compr. with OSSI oil cooler R717)	0.090	1	1	1	3141-163
28B-3	inside pipe connection to control system (compr. with HE8 oil cooler HCFC)	0.090	1	1	1	3141-164
38C-1	Connection for disharge pipe -SMC112	0.120	1			2333-024
38C-3	Connection for disharge pipe -SMC116 and TSMC116	0.180		1	1	2333-026
38D-1	O-ring PRP 212 - 21,80 x 3,53*)	0.002	2	2	2	1331-020
38E-1	O-ring PRP 321 - 29,51 x 5,33*)	0.004	1	1	1	1331-039
38F-1	Gasket dia. 27/21 x1,5	0.001	1	1	1	2356-133
38G-1	O-ring dia. 26,58 x 3,5')	0.002	1	1	1	1331-023
38H-1	Discharge pipe for oil	0.140	1	1	1	3141-114
38J-1	Support for oil pipe	0.130	1	1	1	2213-150
38K-1	Hexagon head screw M10 x 16	0.012	2	2	2	1424-189
38L-1	Spring washer dia. 17,2/10,2 x 2,2	0.002	2	2	2	1437-033
	Analogous control and safety
	equipment
39A-1	Gauge panel	0.070	1	1	1	3146-042
39B-1	Socket cap screw M10 x 60	0.045	2	2	2	1413-382
39C-1	Console		1	1	1	2213-142
39D-1	Bar for controls (4 controls)		1	1	1	2213-143
39D-2	Bar for controls (5 controls)		1	1	1	2213-144
39D-3	Bar for controls (6 controls)		1	1	1	2213-145
39D-4	Bar for controls (7 controls)		1	1	1	2213-154
39D-5	Bar for controls (US, SMC)		1	1	1	2213-368
39D-6	Bar for controls (US, TSMC)					2213-369
39E-1	Hexagon head screw M6 x 12		2	2	2	1424-150
39F-1	Spring washer dia. 11/6		2	2	2	1437-022
39G-1	Socket cap screw M4 x 6					1412-200
39H-1	Spring washer dia. 7/4					1437-020
39J-1	Socket cap screw M5 x 10		4	4	4	1413-330
39K-1	Spring washer dia. 9/5		4	4	4	1437-021
39L-1	Console for gauge panel		1	1	1	2213-149
39M-1	Nut M10		2	2	2	1432-064
39N-1	Spring washer		2	2	2	1437-033
	Cooling water connection  See section: Water cooling of reciprocating compressor
40A-1	Set of hoses for cooling water SMC112	2.700	1			3185-157
40A-2	Set of hoses for cooling water SMC116	2.820		1	1	3185-158
40B-1	Hose connection - 3/8" - straight	0.004	28	32	32	2334-025
40C-1	Angle - 3/8"	0.009	17	17	17	1341-090
40D-1	T-piece	0.015	4	4	4	1341-141
40E-1	Hose clamp	0.015	28	32	32	1345-168
40F-1	Cable binder		5	5	5	1554-062
40G-1	Nipple 3/4" - 3/8"	0.070	2	2	2	2312-016
40H-1	T-piece 3/4" - 3/4" - 3/8"	0.150	2	2	2	1351-026
	Purge valve
42A-1	Purge valve	0.300	1	1	2	2412-585
42B-1	Threaded nipple		1	1	1	1349-078
42C-1	Cutting ring	0.135	1	1	2	1349-062
42D-1	Nut
42E-1	Nut	0.070	1	1	2	2313-045
42F-1	Connection pipe with collar	0.025	1	1	2	2334-027
42G-1	Gasket	0.001	2	2	4	2356-123
42H-1	Nut	0.060	1	1	2	2313-027
	Pressure and temperature controls Pressure controls for R717
45A-1	KP 5A	0.300	1	1	1	1373-125
45B-1	KP 15A	0.760	1	1	1	1373-142
45C-1	MP 55A	1.100	1	1	1	1373-162
	Pressure controls for R22, R134a and R404A
45D-1	KP 5	0.300	1	1	1	1373-123
45E-1	KP 15	0.540	1	1	1	1373-135
45F-1	MP 55	1.100	1	1	1	1373-159
	Temperature controls:
45G-1	KP 98	0.720	1	1	1	1373-043
45H-1	KP 77	0.350	1	1	1	1373-044
45J-1	Phail pocket for temperature controls	0.770	1	1	1	1377-171
45K-1	Gasket		1	1	1	2356-133
	AMR 350 S coupling
48A-4	Disc pack	1.132	2	2	2	1524-158
48B-4	Bolt	0.054	16	16	16	1524-166
48C-4	Bevel washer	0.010	4	4	4	1524-188
48D-4	Lock nut	0.018	16	16	16	1524-174
48E-4	Washer	0.008	16	16	16	1524-182
	Intermediate bearing
49-1	Intermediate bearing complete	17.600	1	1	1	3113-146
49A-1	Housing		1	1	1
49B-1	Socket cap screw M 12 x 45 DIN 912	0.052	4	4	4	1413-389
49C-1	Spring washer dia. 12,2 x 20,2	0.002	4	4	4	1437-081
49D-1	Guide pin dia. 5x26	0.002	2	2	2	1446-022
49E-1	Half section of bearing	0.080	8	8	8	2133-003
49E-2	Half section of bearing for repair  0,5 mm undersize	0.080	8	8	8	2133-004
49F-1	Hexagon head screw M10 x 65	0.045	2	2	2	1424-199
49G-1	Spring washer M10	0.002	2	2	2	1437-033
49H-1	Threaded plug 3/4" BSP	0.065	2	2	2	2314-027
49J-1	Gasket dia. 34/27 x 1,5	0.001	2	2	2	2356-140
	Capacity regulation
50A-2	Valve body with 2 solenoid valves without coils	2.530	2		1	3143-384
50A-3	Vafve body with 3 solenoid valves without coils	3.440		2	1	3143-385
50A-4	Valve body with 4 solenoid valves without coils	3.480		2		3143-386
50B-1	Coil 220/230V,  50/60 Hz, 10 W	0.260				1372-537
50B-2	Coil 110V,  50/60 Hz. 10W	0.260				1372-538
50B-3	Coil 240V,  50 Hz, 10W	0.260				1372-539
50C	Solenoid valve					1372-424
	(service kit for one solenoid valve)
	Crankcase heater
57A-1	Crankcase heater - 270 W -115 V,	810	2	2	2	3181-034
	1 1/4" BSP
57A-2	Crankcase heater - 270 W - 230 V,	810	2	2	2	3181-035
	1 1/4" BSP
57A-3	Crankcase heater - 270 W - 250 V,	810	2	2	2	3181-036
	1 1/4" BSP
57B-1	Sealing ring dia. 42/49 x 6,5	0,022	2	2	2	1349-213
80	Solenoide valve blok, complete with 0,6 mm orifice for oil return, excl. coil	2.040	1	1	1	1372-179
	Strainer kit consist of:		1	1	1	1372-089
80E	Strainer
80G	Al-gasket
	Service kit consist of:		1	1	1	1372-086
80P	Armature tube
80H	Armature
80K	O-ring
80M	O-ring
80L	Al-gasket
80N	Snap fastener
	Seal kit consist of:		1	1	1	1372-091
80G	Al-gasket
80K	O-ring
80M	O-ring
80L	Al-gasket
80Q	Al-gasket
	Orifice kit 0,6 mm consist of:		1	1	1	1371-034
80L	Al-gasket
80Q	Al-gasket
801	Orifice 0,6 mm
	Orifice kit 0,8 mm consist of:		1	1	1	1371-035
80L	Al-gasket
80Q	Al-gasket
801	Orifice 0,8 mm
	Orifice kit 1,0 mm consist of:		1	1	1	1371-036
80L	Al-gasket
80Q	At-gasket
801	Orifice 1,0 mm
	Orifice kit 3,3 mm  (for thermopump only) consist of:		1	1	1	1371-037
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 3,3 mm
80J-1	Coil 220/230V, 50/60 Hz. 10 W	0.285				1372-537
80J-2	Coil 110V, 50/60 Hz, 10W	0.285				1372-538
80J-3	Coil 240V, 50 Hz, 10W	0.285				1372-539
80J-4	Coil 24V, 50 Hz, 10W	0.285				1372-541
	Intermediate pressure connections
90A-1	Mixing chamber with flange				1	3114-070
90B-1	Counter flange for mixing chamber				1	3115-018
90C-1	Intermediate ring				1	3422-111
90D-1	O-ring PRP 246 -113,9 x 3,55 *)				1	1331-087
90E-1	O-ring PRP 248 -120,2 x 3,5 *)				1	1331-089
90F-1	Hexagon head screw M16 x 50				8	1424-259
90G-1	Spring washer dia. 26,2/16,2 x 3,5				8	1424-027
90H-1	O-ring dia. 132,9x3,5				1	1331-093
90J-1	Cap				1	2312-027
90K-1	Gasket dia. 18/1 Ox 1.5				1	2356-123
	Oil cooling - type HE8 S tor R22
92A-1	Oil cooler		1	1	1	4242-038
92B-1	Stop valve BMSL 10	0.300	1	1	1	1374-171
92C-1	Thermostatic expansion valve TX 2 - 0.5	0.400	1	1	1	1371-305
92D-1	Solenoid valve without coil	0.350	1	1	1	1372-422
92N-1	Coil 220/230V,  50/60 Hz, 10 W	0.260				1372-537
92N-2	Coil 110V.  50/60 Hz, 10W	0.260				1372-538
92N-3	Coil 240V,  50 Hz, 10W	0.260				1372-539
92E-1	Filter	0.320	1	1	1	4522-002
92F-1	Screwed connection GE 10-LR 1/4"	0.050	6	6	6	1349-051
92G-1	Single banjo connector DSVW 10-LR	0.160	1	1	1	1349-089
92H-1	Threaded nipple	0.110	1	1	1	2314-056
92J-1	Threaded plug for 8/6 mm pipe	0.015	2	2	2	2314-053
92K-1	Gasket dia. 19/14x1,5- aluminium	0.001	8	8	8	2356-124
92L-1	Connection piece for 1 pipe dia. 8 mm	0.030	2	2	2	2333-021
92M-1	Gasket - dia. 27/21 x 1,5 - aluminium	0.001	3	3	3	2356-133
	Oil cooling - type OOSI tor R717
93A-1	Oil cooler		1	1	1	4242-029
93B-1	Stop valve SN 6		1	1	1	2413-010
93C-1	Thermostatic injection TEAT 20-2	0.400	1	1	1	1371-240
93D-1	Solenoid valve without coil	0.445	1	1	1	1372-422
93N-1	Coil 220/230V. 50/60 Hz, 10 W	0.260				1372-537
93N-2	Coil 110V. 50/60 Hz, 10W	0.260				1372-538
93N-3	Coil 240V, 50 Hz, 10W	0.260				1372-539
93E-1	Filter	0.320	1	1	1	4522-002
93F-1	Screwed connection GE 10-LR 1/4"	0.050	6	6	6	1349-051
93G-1	Single banjo connector DSVW 10-LR	0.160	1	1	1	1349-089
93H-1	Threaded nipple	0.110	1	1	1	2314-056
93J-1	Threaded plug for dia. 8/6 mm pipe	0.015	4	4	4	2314-053
93K-1	Gasket dia. 19/14 x 1,5-alunimium	0.001	8	8	8	2356-124
93L-1	Connection piece for 1 pipe dia. 8 mm	0.030	4	4	4	2333-021
93M-1	Gasket dia. 27/21 x 1,5 - aluminium	0.001	3	3	3	2356-133
	Chain drive for oil pump
	Chain drive complete					3141-127
96A-1	Hub for chain wheel (crankshaft)		1	1	1	2126-020
96B-1	Hub for chain wheel (oil pump)		1	1	1	2126-019
96C-1	Chain wheel (crankshaft)		1	1	1	2126-018
96D-1	Chain wheel (oil pump)		1	1	1	2126-017
96E-1	Chain		1	1	1	1521-102
96F-1	Hexagon head screw		5	5	5	1424-150
96G-1	Spring washer		5	5	5	1437-022
96H-1	Shield for oil		1	1	1	3141-128
98	Thermo pump
98A-1	Side cover for thermo pump		2	2	2	3113-145
98B-1	Monitor box		2	2	2	1553-215
	Alien screw M4x 16		4	4	4	1412-204
	Spring washer dia. 4		4	4	4	1437-020
98C-1	Level indicator		4	4	4	3185-038
98D-1	Outer part for level indicator		4	4	4	3185-034
98E-1	Washer dia. 20/13x1,5		4	4	4	2356-125
98F-1	Rubber cap		4	4	4	1554-194
98G-1	Solenoid valve without coil		1	1	1	1372-422
98H-1	Solenoid valve without coil		2	2	2	1372-423
98J-1	Coil 220/230V,  50/60 Hz, 10 W	0.260				1372-537
98J-2	Coil 110V,  50/60 Hz, 10W	0.260				1372-538
98J-3	Coil 240V,  50 Hz, 10W	0.260				1372-539
98K-1	Check valve		4	4	2	1364-008
	Straght joint 10 mm BSP		9	10	6	1349-051
	Socket 10mm BSP		8	8	5	1349-101
	T-joint 10mm		7	9	3	1349-041
	Strap for stop valve		2	2	1	2212-059
	Cable binder no. 10		2	2	1	1554-054
	Alien screw M4x 12		4	4	2	1412-203
	Nut M4		4	4	2	1432-035
98L-1	Washer dia. 29/21 x 1,5		4	4	2	2356-136
98M-1	VA-joint with nozzle 1,2 mm		7	9	3	2314-097
	Angle joint		3	6	4	1349-033
	Angle swivel joint 8 mm		5	2	5	1349-087
	Angle swivel joint 10 mm		3	6	2	1349-089
	Bushing 1/4" x 1/2" RG		1	1	1	2312-013
	Straight joint 8 mm BSP		2	2		1349-050
	Threaded nipple		1	1	1	2314-056
	Threaded nipple		1	1	1	2314-056
	Gasket dia. 27/21 x1,5Al		2	2	2	2356-133
	Angle joint 10 mm		1			1349-112
	Connecting piece 8 mm		1	1		2333-021
	Threaded plug		1	1		2314-053
	Gasket dia. 19/14x1,5		2	2		2356-124
	Strap		4	4	1	1377-117
	Spring washer for M5				1	1437-021
	Allen screw M5x 10				1	1413-330
	Hexagon set screw M6 x 12		2	2		1424-150
	Nut M6		2	2		1432-061
	Spring washer for M6		4	4		1437-022
	Gasket dia. 19/14x4		2	3	3	2356-283
98N-1	Filter		2	2	1	4522-002
98P-1	Stop valve		2	2	1	2412-277
98Q-1	Cooling cover		2	2	1	3113-143
98R-1	Gasket for side cover		2	2	1	2353-151
98S-1	Hexagon head screw M14 x 80		32	32	16	1424-081
98T-1	Oil cooler OSSI		1	1	1	4242-029
	Socket 1/4"		1	1	1	1349-101
98V	Solenoid valve without coil		2	2	1	1372-453
98X	PT100 sensor		2	2	1	1373-253
98Y	Stop valve		2	2	1	2412-277
98Z	Non-return valve		2	2	1	1364-022
98AA	Screw joint		2	2	1	2314-105
	UNISAB
99A-1	Support for UNISAB		1	1	1	2213-500
99B-3	Distance washers		4	4	4	2212-130
99C-1	Screw for support M 10 x 20		2	2	2	1424-190
99D-1	Screw for UNISAB M6 x 20		4	4	4	1424-152
99E-1	Washers dia. 22/7 x 1,5		4	4	4	1436-025

 

Tools set for compressor  SMC 104-116 Mk3 & TSMC 108-116 MR3 - type S-L-E

Line no. A600  = Normal set, tools set no 3183-109

Line no. A601 = Extended set. tools set no 3183-110

Line no. A602A = Tools for coupling (SMC 104-108)

Line no. A602B = Tools for coupling (SMC 112-116)

Line no. A603 = Tools for alignment of coupling

 

Pos.No	Designation	Dimension	Part No.	Line No.
				A 600	A 601	A 602		A603
						A	B
1-1	Clamp with screw, compr. type S and L		3183-144	4	4
1-2	Clamp with screw, compr. type E		3183-145	4	4
2	Tools for shaft seal		3183-139	1	1
3	Tommy screw for cylinder liner		3183-041	2	2
4	Theaded plug for unloading cylinder	3/8" BSP	2314-017	2	2
5	Supporting plate for pistons		3183-115	8	8
6	Spanner for heating cartridge	NV55	3183-060	1	1
7	Trigger for coupling or belt pulley		3183-059	1	1
8	Adjusting jig for coupling		3183-105					1
9-1	Wrench for cylinder screw	NV 4			1
9-2	Wrench for cylinder screw	NV 5			1
9-3	Wrench for cylinder screw	NV 8			1
9-4	Wrench for cylinder screw	NV10			1
9-5	Special wrench for shaft seal	NV 4	1612-392	1	1
10-1	Retaining-ring plier	J21/G			1
10-2	Retaining-ring plier	A11/G			1
11-1	Open end and ring spanner	NV10			1
11-2	Open end and ring spanner	NV17			1
11-3	Open end and ring spanner	NV19			1
11-4	Open end and ring spanner	NV22			1
11-5	Open end and ring spanner	NV24			1
11-6	Open end and ring spanner	NV27			1
13-1	Socket wrench	NV10			1
13-2	Socket wrench	NV13			1
13-3	Socket wrench	NV17			1
13-4	Socket wrench	NV19			1
13-5	Socket wrench	NV22			1
13-6	Socket wrench	NV24			1	1	1
13-7	Socket wrench	NV27			1
13-8	Socket wrench	NV30			1
13-9	Socket wrench	NV32			1
13-10	Socket wrench	NV9/16"			1
13-11	Socket wrench	NV 3/4"			1		1
13-12	Socket wrench	NV11/16"			1	1
14	Ratchet handle				1
15	Speed handle				1
16	Universal joint for socket wrench				1
17-1	Extension rod for socket wrench				1
17-2	Extension rod for socket wrench				1
19-1	Torque wrench 15-90 Nm				1
19-2	Torque wrench 40-200 Nm				1	1	1
20	Coupler for torque wrench 1/2				2	1	1
21-1	Open spanner for torque wrench	NV11/16"			1	1
21-2	Open spanner for torque wrench	NV 3/4"			1		1
22	Feeler gauge							1

Spare parts for SMC 186 - 188 & TSMC 188

Spare parts for SMC 186 - 188 & TSMC 188
Relevant drawings SMC:		0661-606-0661-608
Relevant drawings TSMC:		0661-607-0661-608
Pos.	Designation	Weight	Number each compressor			Part no.
		each in kg	SMC 186	SMC 188	TSMC 188
	Compressor frame
1A-1	Frame SMC 186		1			3111-072
1A-2	Frame SMC 188			1		3111-073
1A-3	Frame TSMC 188				1	3111-074
1B-1	Oil sight glass	0,230	1	1	1	1226-015
1C-1	O-ring 52,07 x 2,62	0,002	1	1	1	1331-140
1D-1	Hexagon screw M6 x 18 - 8,8 DIN 933	0,010	4	4	4	1424-148
	Top cover - air cooled
2A-1	Top cover		2	3	2	3113-150
2A-2	Top cover with flange for valve		1	1	2	3113-149
2C-1	Gasket for top cover	0,125	3	4	4	2353-222
2E-1	Hexagon head screw M20 x 130 - 8,8 DIN 931	0,360	46	62	60	1424-122
2F-1	Hexagon head screw M20 x 190 - 8,8 DIN 931	0,510	2	2	4	1424-128
2G-1	Washer 37/21 x 3	0,020	48	64	64	1436-077
	Top cover - water cooled
2A-1	Top cover		2	3	2	3113-150
2A-2	Top cover with flange for valve		1	1	2	3113-149
2B-1	Water cover		3	4	4	3113-151
2C-1	Gasket for top cover	0,125	3	4	4	2353-222
2D-1	Gasket for water cover	0,210	3	4	4	2353-157
2E-1	Hexagon head screw M20 x 130	0,360	4	6	4	1424-122
2E-2	Hexagon head screw M20 x 160 - 8,8 DIN 931	0,400	42	56	56	1424-125
2F-1	Hexagon head screw M20 x 190 - 8,8 DIN 931	0,510	2	2	4	1424-128
2G-1	Washer 37/21 x 3	0,020	48	64	64	1436-077
2H-1	Hexagon head screw M12 x 50 - 8,8 DIN 933	0,050	21	28	28	1424-219
2J-1	Washer dia. 24/13x2,5	0,008	21	28	28	1434-036
	Side cover - water cooled
3A-2	Side cover with cooling fins		2	2	2	3113-153
3B-1	Water cover		2	2	2	3113-151
3C-1	Gasket for side cover	0,125	2	2	2	2353-156
3D-1	Gasket for water cover	0,210	2	2	2	2353-157
3E-2	Hexagon head screw M20 x 80 - 8,8 DIN 933	0,240	28	28	28	1424-293
3E-1	Hexagon head screw M20 x 50 - 8,8 DIN 933		4	4	4	1424-287
3G-1	Washer dia. 37/21 x 3	0,020	32	32	32	1436-077
3H-1	Hexagon head screw M12 x 50 - 8,8 DIN 933	0,050	6	6	6	1424-219
3J-1	Washer dia. 24/13x2,5	0,080	6	6	6	1436-036
	End cover at pump end
4A-1	End cover at pump end		1	1	1	3113-155
4B-1	Gasket for end cover	0,135	1	1	1	2353-158
4C-1	Hexagon head cover M20 x 140 - 8,8 DIN 931	0,360	14	14	14	1424-123
4D-1	Washer dia. 37/21 x 3	0,020	14	14	14	1436-077
	Bearing cover at pump
5A-1	Bearing cover at pump		1	1	1	3113-033
5B-1	Hexagon head screw M20 x 40 - 8,8 DIN 933	0,120	6	6	6	1424-285
5C-1	Bushing with collar	4,280	1	1	1	2132-023
5C-2	Bushing for repair (1,0 mm undersize)	4,280	1	1	1	2132-024
5D-1	Gasket for bearing cover 0,25 mm	0,015				2353-016
5D-2	Gasket for bearing cover 0,50 mm	0,018				2353-017
5D-3	Gasket for bearing cover 0,75 mm	0,021				2353-018
5E-1	Spring dowel sleeve dia. 8x16 - DIN 1481	0,030	1	1	1	1446-009
	Bearing cover at shaft seal end
6A-1	Bearing cover		1	1	1	3113-152
6B-1	Hexagon head screw M20 x 100 - 8,8 DIN	0,340	14	14	14	1424-119
6C-1	Bushing with collar	4,280	1	1	1	2132-023
6C-2	Bushing for repair (1,0 mm undersize)	4,280	2	2	2	2132-024
6D-1	Gasket	0,065	1	1	1	2353-161
6E-1	Washer dia. 37/21 x 3	0,020	14	14	14	1436-077
6F-1	Spring dowel sleeve dia. 8x16- DIN 1481	0,030	1	1	1	1446-009
6G	Valve for prelubrication		1	1	1	2412-585
6H	Nut		1	1	1	2313-045
6J	Special joint		1	1	1	2334-027
6K	Cap		1	1	1	2313-027
6L	Joint 3/8"		1	1	1	1349-053
6M	Alu gasket		1	1	1	2356-123
	Shaft seal cover
8A-1	Shaft seal cover		1	1	1	3113-154
8B-1	Gasket	0,036	1	1	1	2353-006
8C-1	Hexagon head M14 x 40	0,022	8	8	8	1424-241
8D-1	Hose connection 1/4"	0,003	1	1	1	1345-143
8E-1	Plastic hose 3/16" x 400 mm	0,001	1	1	1	1241-190
8F	Cylindrical pin dia. 3x12	0,001	1	1	1	1445-054
	Shaft seal
10	Shaft seal complete	6,370	1	1	1	3126-138
10A-1	Slide ring (special carbon)	0,452	1	1	1	3126-135
10B-1	Sealing ring Variseal M dia. 146,1	0,010	1	1	1	1331-522
10C-1	O-ring dia, 151,99x3,53	0,006	1	1	1	1331-099
10D-1	Slide ring (cast iron)	3,385	1	1	1	3126-136
10E-1	O-ring dia. 129,5x7	0,030	1	1	1	2353-177
10G-1	Spring	0,009	12	12	12	2142-004
10H-1	Cone ring	1,925	1	1	1	3126-137
10J-1	Special screw	0,024	3	3	3	1413-001
10K-1	Spiroloxring RS 500 dia. 127	0,034	1	1	1	1437-298
10L-1	Nut M8	0,004	3	3	3	1432-063
10M-1	Lock washer dia. 15/8,4 x 0,8	0,002	3	3	3	1437-054
	Oil pump
11-1	Oil pump, complete	10,80	1	1	1	3141-130
11A-1	Housing	5,400	1	1	1	3141-008
11B-1	Cover	2,920	1	1	1	3141-012
11C-1	Gasket for cover 0,2 mm	0,001	1	1	1	2353-022
11D-1	Heaxagon head screw M10 x 40 - 8,8 DIN 933	0,030	4	4	4	1424-194
HE-1	Spring washer dia. 17/10 x 2,2 - DIN 127	0,002	8	8	8	1437-080
11F-1	Cylindrical pin dia. 6 x 36	0,040	2	2	2	1445-061
11G-1	Pump gear wheel	1,080	1	1	1	3141-044
11H-1	Pump gear wheel	1,260	1	1	1	3141-045
11J-1	Key 6x6x15	0,005	1	1	1	1526-051
11K-1	Threaded nipple 12x1 1/8"	0,418	2	2	2	2311-043
11L-1	Gasket for nipple dia. 50/40 x 1,5	0,002	2	2	2	2356-056
11AB-1	Hexagon head screw M10 x 40 - 8,8 DIN 933	0,030	4	4	4	1424-194
	Chain drive
11M-1	Chain wheel 1/2" x 25 (pump)	0,750	1	1	1	2126-022
11N-1	Washer dia. 30/17x3	0,005	1	1	1	1436-017
11P-1	Locking nut M 16	0,040	1	1	1	1433-083
11Q-1	Chain wheel 1/2" x 28 (crankshaft)	0,470	1	1	1	2126-023
11R-1	Hub for chainwheel	0,730	1	1	1	2126-024
11 S-1	Hexagon head screw M14 x 40 - 8,8 DIN 933	0,945	2	2	2	1424-241
11T-1	Spring washer dia. 23/14 x 3	0,004	2	2	2	1437-030
11U-1	Chain 1/2" 58 endless	0,510	1	1	1	1521-105
11V-1	Guide shield for oil	0,380	1	1	1	3141-136
11X-1	Hexagon head screw M6 x 12	0,003	2	2	2	1413-339
11Y-1	Spring washer dia. 11,1/6,1 x 1,6	0,005	2	2	2	1437-022
	Unloading cylinder SMC • TSMC (LP)  See drawing no 0661-602
12-1	Unloading cylinder complete L = 122, S = 49	8,400	1	1		3135-019
12-2	Unloading cylinder complete L = 167, S = 94	8,500	1	1	1	3135-020
12-3	Unloading cylinder complete L = 212, S = 139	8,600	1	1	1	3135-021
12-4	Unloading cylinder complete L = 257, S = 184	8,700		1	1	3135-022
12A-1	Unloading cylinder SMC -TSMC (LP)	6,700	3	4	3	3135-030
12B-1	Piston	0,800	3	4	3	3135-035
12C-1	Piston rod L= 122	0,200	1	1		3135-046
12C-2	Piston rod L= 167	0,250	1	1	1	3135-047
12C-3	Piston rod L= 212	0,300	1	1	1	3135-048
12C-4	Piston rod L= 257	0,350		1	1	3135-049
12D-1	Threaded plug - 3/8" BSP	0,065	3	4	3	2314-025
12E-1	Gasket dia. 25/17x1,5	0,002	3	4	3	2356-130
12F-1	Seeger ring dia. 85	0,030	3	4	3	1437-165
12G-1	Spring guide	0,100	3	4	3	2145-005
12H-1	Spring retainer	0,200	3	4	3	3135-058
12J-1	Spring dia. 4/40 x 88	0,100	3	4	3	2142-041
12J-2	Spring dia. 5/55 x 88	0,170	3	4	3	2142-042
12K-1	Benzing ring dia. 12	0,001	3	4	3	1437-108
12K-2	Benzing ring dia. 9	0,001	3	4	3	1437-105
12T-1	O-ring neoprene dia. 142,7 x 3,5	0,010	3	4	3	1331-096
12U-1	Hexagon head screw M14 x 50	0,075	12	16	12	1424-243
12V-1	Washer dia. 28/15x2,5	0,010	12	16	12	1436-037
	Unloading cylinder TSMC (HP)  See drawing no 0661-602
12-5	Unloading cylinder complete TSMC (HP)	9,200			1	3135-165
12A-2	Unloading cylinder	8,800			1	3135-032
12B-1	Piston	0,800			1	3135-035
12C-5	Piston rod for TSMC (HP)	0,200			1	3135-166
12D-1	Threaded plug 3/8" BSP	0,065			1	2314-025
12E-1	Gasket dia. 25/17x1,5	0,002			1	2356-130
12G-5	Spring guide	0,110			1	3135-095
12H-5	Cover	0,690			1	3135-106
12J-1	Spring dia. 4/40 x 88	0,100			1	2142-041
12J-2	Spring dia. 5/55 x 88	0,170			1	2142-042
12K-5	Benzing ring dia. 9	0,001			2	1437-105
12N-1	Gasket for cover dia. 110/80 x 1	0,025			1	2353-026
12P-1	Hexagon head screw M6 x 20	0,009			6	1424-152
12Q-1	O-ring neoprene PRP 112	0,001			1	1331-013
12R-1	Self  locking nut 3/8" INF	0,010			1	1433-100
12S-1	Washer dia. 21/10,5x2	0,005			1	1436-035
12T-1	O-ring neoprene dia. 142,7 x 3,5	0,010			1	1331-096
12U-1	Hexagon head screw M14 x 50	0,075			4	1424-243
12V-1	Washer dia. 28/15 x 2,5	0,010			4	1436-037
	Frame for unloading mechanism
13A-1	Suspension rod (right)	1,340	3	4	4	3135-067
13B-1	Suspersion rod (left)	1,340	3	4	4	3135-068
13C-1	Cross piece at piston rod	1,240	3	4	4	3135-077
13D-1	Cross piece	1,220	3	4	4	3135-083
13E-1	Counter sunk screw M6 x 25	0,006	12	16	16	1413-100
	Bracket for unloading mechanism
14A-1	Bracket with pin	0,250	6	8	7	3135-061
14B-1	Spacing ring for bracket	0,015	12	16	14	2124-005
14C-1	Hexagon head screw M8 x 45	0,010	12	16	14	1424-172
14D-1	Spring washer	0,002	12	16	14	1437-023
	Rocker for unloading mechanism
15A-1	Rocker arm	0,100	12	16	16	3135-097
15B-1	Bearing cup (without thread)	0,020	12	16	12	3135-100
15B-2	Bearing cup (with thread) TSMC HP	0,035			4	3135-102
15C-1	Spring holders	0,002	12	16	16	2145-002
15D-1	Spring	0,052	12	16	16	2142-046
15E-1	Washer for regulation of bearing cup	0,004				3142-016
	Crankshaft
*16-1	Crankshaft SMC186	213,000	1			3121-118
*16-2	Crankshaft SMC 188-TSMC 188	223,000		1	1	3121-119
16A-1	Lock washer	1,890	1	1	1	3121-117
16B-1	Hexagon head screw M14 x 45 - 8,8 DIN 933	0,010	2	2	2	1424-242
16C-1	Spring washer dia. 23,3/14,2 x 3	0,004	2	2	2	1437-030
16D-1	Key 32x18x100	0,360	1	1	1	2123-007
	Connecting rod
*17-1	Connecting rod, complete, SMC-TSMC LP	12,300	6	8	6	3123-005
*17-2	Connecting rod, complete, TSMC HP	12,300			2	3123-103
*17-3	Connecting rod with piston complete, TSMC HP	19,200			2	3123-104
17A-1	Half-section of bearing	0,180	12	16	16	2133-005
17A-2	Half-section of bearing for repair	0,180	12	16	16	2133-006
17B-1	Bushing for piston pin, SMC-TSMC LP	1,140	6	8	6	2132-006
17B-2	Needle roller bearing TSMC HP	0,370			4	1511-006
17C-1	Connection rod bolt	0,200	12	16	16	2111-066
17D-1	Self lock nut 5/8" UNF	0,030	12	16	16	1433-118
	Piston See drawing no 0661-602
18-1	Piston with pin and rings	6,075	6	8	8	3124-053
18A-1	Piston pin	1,965	6	8	8	3125-119
18C-1	Piston ring TOP mark	0,105	12	16	16	3125-128
18D-1	Oil scraper ring	0,115	6	8	8	3125-077
18E-1	Seeger ring dia. 70 mm	0,020	12	16	16	1437-159
	Cylinder liner with suction valve  See drawing no 0661-602
19-1	Cylinder liner with suction valve R717	26,480	6	8	6	3112-067
19-2	Cylinder liner with suction valve HCFC	26,480	6	8	6	3112-069
19-3	Cylinder liner with suction valve R717 TSMC HP	26,340			2	3112-068
19-4	Cylinder liner with suction valve HCFC TSMC HP	26,340			2	3112-070
19A-1	Cylinder liner	17,130	6	8	8	3112-066
19B-1	Unloading ring with pins	1,238	6	8	8	3135-063
19C-1	Washer dia. 8 x 5,3 x 0,5	0,001	72	96	96	2114-020
19D-1	Spring for unloading ring	0,002	72	96	96	2142-035
19E-1	Tension spiral	0,040	6	8	8	2142-049
19F-1	Ring plates for suction valve	0,060	6	8	8	3131-064
19G-1	Valve spring	0,006	36	48	48	2141-050
19H-1	Suction valve retaining plate R717	5,380	6	8	8	2132-058
19H-2	Suction valve retaining plate HCFC	5,380	6	8	8	3132-061
19J-1	Guide ring for discharge valve	2,180	6	8	8	3134-007
19K-1	Gasket for cylinder liner - 0,5 mm	0,006	6	8	8	2356-116
19K-2	Gasket for cylinder liner - 0,8 mm	0,010	6	8	8	2356-249
19M-1	O-ring only TSMC HP	0,060			2	1331-105
19N-1	Socket cap screw M8x60 DIN 912	0,026	72	96	96	1413-364
	Discharge valve  See drawing no 0661 -602
20-1	Discharge valve complete R717 HP				2	3136-076
20-2	Discharge valve complete R22 HP				2	3136-075
20-3	Discharge valve complete R717 LP		6	8	6	3136-078
20-4	Discharge valve complete R22 LP		6	8	6	3136-077
20A-1	Discharge valve seat	1,830	6	8	8	3133-019
20B-1	Valve retaining plate R717 HP	4,005			2	3132-063
20B-2	Valve retaining plate R22 HP	4,005			2	3132-062
20B-3	Valve retaining plate R717 LP	4,005	6	8	6	3132-065
20B-4	Valve retaining plate R22 LP	4,005	6	8	6	3132-066
20C-1	Ring plate for discharge valve	0,045	6	8	8	3131-065
20D-1	Special screw	0,415	6	8	8	2111-111
20E-1	Nut M24 x 2 - DIN 934	0,094	12	16	16	1432-052
20F-1	Spring guide	0,040	6	8	8	2145-020
20G-1	Valve spring (valve for 20B-1 and 2)	0,006	72	96	24	2141-050
20G-2	Valve spring (valve for 20B-3 and 4)	0,006	36	48	36	2141-050
20K-1	Guide for ring plate R717	0,175	6	8	8	3132-060
20K-2	Guide for ring plate R22	0,180	6	8	8	3132-064
	Spring for safety head
21-1	Spring	0,400	6	8	8	2142-057
	Oil pressure valve
22-1	Oil pressure valve complete	0,450	1	1	1	3142-150
22G-1	Gasket 90 x 44 x 1	0,001	1	1	1	2354-075
22H-1	Hexagon head screw M12 x 35 - 8,8 DIN 933	0,040	2	2	2	1424-216
	Oil changing valve
23A-1	Oil changing valve complete	0,300	1	1	1	2412-585
23B-1	Threaded reducing nipple	0,155	1	1	1	2311-059
23C-1	Socket	0,075	1	1	1	2313-035
23D-1	Gasket	0,001	1	1	1	2356-123
23E-1	Gasket	0,001	1	1	1	2356-140
23F-1	Gasket	0,001	1	1	1	2356-283
23G-1	Nut	0,060	1	1	1	2313-027
	By-pass valves
24-1	By-pass valve dia. 38 TSMC LP 12 bar	10,240			1	2416-057
24-2	By-pass valve dia. 38 SMC 18 bar	10,215	1	1		2416-058
24-3	By-pass valve dia. 38 SMC 21 bar	10,230	1	1		2416-059
24-4	By-pass valve dia. 38 SMC 24 bar	10,240	1	1		2416-060
24-5	By-pass valve dia. 28 TSMC HP 22 bar	3,600			1	3137-007
24-6	By-pass valve dia. 28 TSMC HP 24 bar	3,600			1	3137-009
24C-1	O-ring for cylinder dia. 72,6 x 3,5	0,040	1	1	1	1331-074
24C-5	O-ring for cylinder dia. 50,4 x 3,5	0,002			1	1331-067
24E-1	O-ring for cover dia. 85,3 x 3,5	0,002	1	1	1	1331-078
24E-5	O-ring for cover dia. 63,1 x 3,5	0,002			1	1331-071
24G-1	Hexagon head screw M10 x 30 - 8,8 DIN 933	0,018	4	4	4	1424-192
24G-5	Hexagon head screw M8 x 25,5 - 8,8 DIN 933	0,015			4	1424-168
24H-1	Spring washer dia. 17,2/10,2 x 2	0,002	4	4	4	1437-033
24H-5	Spring washer dia. 14,2/8,2 x 2	0,002			4	1437-023

 

Pos.	Designation	Weight	DIM	Number each compressor			Part no.
		each in kg		SMC 186	SMC 188	TSMC 188
25-1	Stop valves complete discharge HP	13,700	65			1	2414-072
25-2	Stop valves complete inlet HP		100			1	2411-264
25-3	Stop valves complete discharge LP		100	1	1	1	2414-070
25-4	Stop valves complete inlet LP		150	1	1	1	2414-037
25A-1	Housing	3,080	65			1	2432-142
25A-2	Housing	3,210	100			1	2432-144
25A-3	Housing		100	1	1	1	2432-160
25A-4	Housing		150	1	1	1	2432-109
25B-1	Valve bonnet	3,200	65			1	2433-029
25B-2	Valve bonnet	4,500	100	1	1	2	2433-030
25B-4	Valve bonnet	14,660	150	1	1	1	2433-009
25C-1	Front part for cone	0,028	65			1	2444-092
25C-2	Front part for cone	0,520	100	1	1	2	2444-094
25C-4	Front part for cone	1,550	150	1	1	1	2444-006
25D-1	Back part for cone	4,440	65			1	2444-093
25D-2	Back part for cone	1,000	100	1	1	2	2444-095
25D-4	Back part for cone	5,100	150	1	1	1	2444-087
25E-1	Screw for cone	0,120	65-100	1	1	3	2444-018
25E-4	Screw for cone	0,350	150	1	1	1	2444-019
25F-1	Gasket for screw	0,001	65-100	1	1	3	2356-141
25F-4	Gasket for screw	0,001	150	1	1	1	2356-144
25G-1	Threaded connection	0,340	65			1	2445-054
25G-2	Threaded connection	0,400	100	1	1	2	2445-055
25G-4	Threaded connection	0,800	150	1	1	1	2445-049
25H-1	Sealing ring	0,015	65			1	2354-115
25H-2	Sealing ring	0,020	100	1	1	2	2354-117
25H-4	Sealing ring	0,010	150	1	1	1	2354-007
25J-1	O-ring for bonnet 94,6 x 5,3	0,004	65			1	1331-161
25J-2	O-ring for bonnet 116,8 x 7	0,006	100	1	1	2	1331-198
25J-4	O-ring for bonnet 202,79 x 3,5	0,008	150	1	1	1	1331-107
25K-1	Valve spindle	0,420	65			1	2442-030
25K-2	Valve spindle	0,480	100	1	1	2	2442-028
25K-4	Valve spindle	1,000	150	1	1	1	2442-006
25L-1	Lock washer	0,015	65-100	1	1	3	2445-020
25L-4	Lock washer	0,025	150	1	1	1	2445-021
25M-1	Packing gland complete	0,250	65-100	1	1	3	2452-004
25M-4	Packing gland complete	0,350	150	1	1	1	2452-005
25N-1	Guide pin dia. 5x10	0,003	65-100	1	1	1	1446-085
25N-4	Guide screw	0,006	150	1	1	1	2111-036
25P-1	O-ring dia. 28,1 x 3,5	0,002	65-100	1	1	3	1331-024
25P-4	O-ring dia. 31,5x3,5	0,003	150	1	1	1	1331-026
25Q-1	Nylon washer dia. 34/22 x 1,5	0,002	100	1	1	3	2354-017
25Q-4	Nylon washer dia. 39,5/28 x 1,5	0,002	150	1	1	1	2354-018
25R-1	Hexagon head screw M10 x 25 8,8 - DIN 9,33	0,020	65			8	1424-191
25R-2	Hexagon head screw M12 x 30 8,8 - DIN 9,33	0,040	100			8	1424-215
25R-4	Hexagon head screw M20 x 65 8,8 - DIN 9,33	0,210	150	6	6	6	1424-290
25S-1	Hand wheel dia. 140	0,800	65			1	1365-033
25S-2	Hand wheel dia. 180	1,000	100	1	1	2	1365-035
25S-4	Hand wheel dia. 230	1,800	150	1	1	1	2435-011
25T-1	Hexagon head screw M8 x 16	0,010	65-100	1	1	3	1424-166
25T-4	Hexagon head screw M8 x 18	0,010	150	1	1	1	1424-164
25U-1	Washer for hand wheel dia. 28/9,5	0,010		2	2	4	1436-026
25V-4	Spring washer dia. 10	0,002	150			1	1437-033
25Y-1	O-ring dia. 21,8x3,5	0,002	65-100	2	2	6	1331-020
25Y-4	O-ring dia. 25,57 x 3,53	0,002	150	2	2	2	1331-023
25AA-1	Gaske against frame	0,020	65			1	2354-106
25AA-3	Gaske against frame	0,020	100	1	1	1	2354-106
25AA-4	Gaske against frame	0,038	150	1	1	1	2354-120
25AB-1	Hexagon head screw M16 x 45	0,095	65			4	1424-102
25AB-3	Hexagon head screw M16 x 45	0,095	100	4	4	4	1424-102
25AB-4	Hexagon head screw M20 x 65	0,125	150	6	6	6	1424-290
25AC-4	Washer	0,014	150	6	6	6	1436-039
25AD-3	Welding nipple	1,130	100	1	1	1	2322-118
25AD-4	Welding nipple	5,420	150	1	1	1	2322-111
25AE-3	Gasket for welding nipple	0,025	100	1	1	1	2356-104
25AE-4	Gasket for welding nipple	0,040	150	1	1	1	2356-115
25AF-3	Counter flange	2,800	100	1	1	1	2344-005
25AF-4	Counter flange	4,880	150	1	1	1	2344-007
25AG-3	Hexagon head screw M16 x 55	0,050	100	4	4	4	1424-104
25AG-4	Hexagon head screw M20 x 65	0,125	150	6	6	6	1424-290

 

Pos.	Designation	Weight	Number each compressor			Part no.
		each in kg	SMC 186	SMC 188	TSMC 188
	Pressure gauges and parts  Suction and oil pressure gauge
30A-1	R717	1,640	1	1	1	1541-108
30A-2	R12, R22andR502	1,640	1	1	1	1541-232
30A-3	R22, R134a,andR404A	1,620	1	1	1	1541-074
30B-1	Nozzle and gasket dia. 14/08 x 1,5	0,001	1	1	1	3146-013
30C-1	Gasket dia. 11/4x 1,5	0,001	1	1	1	2356-119
30D-1	Cylinder head screw M4 x 20	0,001	3	3	3	1412-350
	Discharge pressure gauge SMC
31A-3	R717	1,380	1	1		1541-029
31A-4	R12, R22andR502	1,400	1	1		1541-160
31A-5	R22, R134a, and R404A	1,400	1	1		1541-075
31A-1	Nozzle and gasket dia. 14/0,8 x 1,5	0,001	1	1		3146-013
31C-1	Cylinder head screw M4 x 20	0,001	3	3		1412-350
	Discharge pressure gauge TSMC
31A-3	R717	1,600			1	1541-101
31A-4	R12, R22andR502	1,660			1	1541-161
31A-5	R22, R134a, and R404A	1,660			1	1541-076
31A-1	Nozzle and gasket dia. 14/0,8 x 1,5	0,001			2	3146-013
31C-1	Cylinder head screw M4 x 20	0,001			3	1412-350
	Oil filter
33-1	Oil filter complete		1	1	1	4524-037
33A-1	Filter element		1	1	1	1517-119
33B-1	Gasket		2	2	2	2356-104
33C-1	End cover		1	1	1	3422-148
33D-1	Rod for filter		1	1	1	2112-142
33E-1	Shield for oil filter		1	1	1	2158-207
33F-1	Bracket with connection		1	1	1	2331-049
33G-1	Distance piece		1	1	1	2212-136
33H-1	Rubber gasket		1	1	1	1334-012
33J-1	Magnet		3	3	3	1517-022
33K-1	Iron ring		1	1	1	2114-038
33L-1	Washer dia. 17		1	1	1	1436-034
33M-1	Washer dia. 24		1	1	1	1436-036
33N-1	Nut M8		1	1	1	1433-073
330-1	Nut M12		1	1	1	1433-075
33P-1	O-ring		1	1	1	1331-009
33Q-1	O-ring		1	1	1	1331-008
	Suction filter
34-1	Suction filter oben with filter bag	1,052	2	2	1	3425-100
34-2	Suction filter closed with filter bag	2,070			1	3425-102
24B-1	Filter bag	0,094	2	2	2	3425-098
34C-1	Insert for filter bag	0,058	2	2	2	3424-062
34D-1	O-ring for filter dia. 132,7 x 5,3	0,020	2	2	3	1331-170
34E-1	Cover	8,210	2	2	1	3422-123
34F-1	O-ring for cover	0,006	2	2	1	1331-099
34G-1	Hexagon head screw M16 x 55	0,050	8	8	4	1424-104
34H-1	Spring washer dia. 16	0,004	8	8	4	1437-027
	Discharge pipe for oil pump
38A-1	Discharge pipe for oil pump	1,395	1	1	1	3141-134
38B-1	Connection for discharge pipe	0,335	1	1	1	2333-050
38C-1	O-ring dia. 28,15x3,5	0,002	1	1	1	1331-024
38D-1	O-ring dia. 43,8 x 5,33	0,006	1	1	1	1331-033
	Gauge panel
39A-1	Gauge panel	0,070	1	1	1	3146-042
39B-1	Socket cap screw M10 x 60	0,050	2	2	2	1413-382
39C-1	Liner plate for gauge panel	0,004	2	1	1	2212-063
	Cooling water connection
40-1	Set of hoses and connections SMC 186	4,550	1			3185-058
40-2	Set of hoses and connection T/SMC	4,700		1	1	3185-059
40A-1	Hose nipple dia. 19 x 3/4"	0,015	14	16	16	2334-026
40B-1	Angle - 3/4" BSP	0,136	8	10	10	1341-092
40C-1	T-piece 1" x 3/4" x 3/4" BSP	0,206	1	1	1	1352-030
40D-1	Redusing socket 1" x 3/4" BSP	0,124	1	1	1	1352-030
40E-1	Cable binder	0,002	3	3	3	1554-062
40F-1	Hose ctampS 28/15	0,024	14	16	16	1345-183
40G-1	T-piece 3/4" x 3/4" x 3/4"	0,176	1	1	1	1341-143
40H-1	Nipple 3/4" x 40	0,052	1	1	1	1345-040
	Pipe connection for gauges pressure  controls and oil filter (by-pass)
41A-1	Threaded nipple 3/4" x 1/1" BSP		1	1	1	2314-064
41B-1	Gasket dia. 34/27 x 1,5 against frame	0,001	1	1	1	2356-140
41C-1	Plug for banjo	0,031	1	1	1	2314-058
41D-1	Gasket for banjo dia. 19/14x1,5	0,001	2	2	2	2356-124
41E-1	Straight screw-in joint 1/4" BSP for OD 8	0,044	1	1	1	1349-050
41F-1	Threaded nipple 1/2" x 1/4" BSP	0,110	1	1	1	2314-056
41G-1	Gasket against frame dia. 27 x 21	0,001	1	1	1	2356-133
41H-1	Plug for double banjo	0,036	1	1	1	2314-059
41J-1	Gasket for banjo	0,001	3	3	3	2356-124
41K-1	Plug for banjo	0,040	1	1	1	2314-048
41L-1	Gasket for banjo	0,001	2	2	2	2356-124
41M-1	Distributor with 2 sockets		1	1	2	2333-043
41N-1	Straight screw-in joint 1/4" BSP for OD 8	0,042	1	1	2	1349-050
41P-1	Gasket for union dia. 9/3 x 1	0,001	4	4	7	2356-117
41Q-1	Angle swivel screw-joint 1/4" BSP for OD 8	0,100	1	1	2	1349-087
41R-1	Threaded plug 1/4" BSP	0,350	5	6	6	2314-022
41T-1	Gasket for plug dia. 19/14 x 1,5	0,001	5	6	6	2356-124
	Purge valve
42A-1	Purge valve, complete	0,300	1	1	1	2412-585
42B-1	Threaded nipple
42C-1	Cutting ring	0,135	1	1	1	1349-062
42D-1	Nut
42E-1	Nut	0,070	1	1	1	2313-045
42F-1	Connection pipe with collar	0,025	1	1	1	2334-027
42G-1	Gasket	0,001	2	2	2	2356-123
42H-1	Nut	0,060	1	1	1	2313-027
	Pressure controls for R717
45A-1	KP5A	0,300			1	1373-125
45B-1	KP15A	0,760	1	1	1	1373-142
45C-1	MP55A	0,900	1	1	1	1373-162
	Pressure controls for HCFC
45D-1	KP5	0,300			1	1373-123
45E-1	KP15	0,540	1	1	1	1373-135
45F-1	MP55	0,800	1	1	1	1373-159
	Temperature controls
45G-1	KP98	0,720	1	1	1	1373-043
45H-1	KP77	0,350	1	1	1	1373-044
45L-1	Phial pocket for temperature controls	0,770	2	2	2	1377-171
45M-1	Gasket for phial pocket dia. 27/21 x 1,5	0,001	2	2	2	2356-133
45N-1	Threaded plug 1/2" BSP	0,065	1	1	1	2314-026
45P-1	Gasket for plug dia. 27/21 x 1,5	0,001	1	1	1	2356-133
	Coupling type 450S
48A-1	Coupling fine (2 sets)	2,792	1	1	1	1524-161
48B-1	Coupling bolts	0,236	16	16	16	1524-169
48C-1	Lock nuts	0,056	16	16	16	1524-177
48D-1	Washer	0,042	16	16	16	1524-185
48E-1	Washer		4	4	4	1524-189
	Capacity regulation
50A-1	Valve body with 1 solenoid valve without coil		1			3143-384
50A-2	Valve body with 2 solenoid valves without coils			1	1	3143-385
50B-1	Coil 220/230, 50/60 Hz, 10W	0,260				1372-537
50B-2	Coil 110 50/60 Hz, 10W	0,260				1372-538
50B-3	Coil 240 50 Hz, 10W	0,260				1372-539
50C	Solenoid valve (service kit for 1 solenoid valve)					1372-424
	Crankcase heater - 3/4" BSP
57A-1	Crankcase heater - 350 W, 110 V	0,620	1	1	1	3181-017
57A-2	Crankcase heater - 350 W, 220 V	0,620	1	1	1	3181-014
57B-1	Gasker dia. 34/27 x 1,5	0,002	1	1	1	2356-140
	Crankcase heater -1 1/4" BSP
57A-3	Crankcase heater - 460 W, 110V		1	1	1	3181-039
57A-4	Crankcase heater - 460 W, 230 V		1	1	1	3181-040
57A-5	Crankcase heater - 460 W, 250 V		1	1	1	3181-038
57B-2	Gasker dia.42/49 x 6,5	0,022	1	1	1	1349-213
80	Solenoide valve blok, complete with 0,6 mm orifice for oil return, excl. coil	2.040	1	1	1 or 2	1372-179
	Strainer kit consist of:		1	1	1 or 2	1372-089
80E	Strainer
80G	Al-gasket
	Service kit consist of:		1	1	1 or 2	1372-086
80P	Armature tube
80H	Armature
80K	O-ring
80M	O-ring
80L	Al-gasket
80N	Snap fastener
	Seal kit consist of:		1	1	1 or 2	1372-091
80G	Al-gasket
80K	O-ring
80M	O-ring
80L	Al-gasket
80Q	Al-gasket
	Orifice kit 0,6 mm consist of:		1	1	1 or 2	1371-034
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 0,6 mm
	Orifice kit 0,8 mm consist of:		1	1	1 or 2	1371-035
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 0,8 mm
	Orifice kit 1,0 mm consist of:		1	1	1 or 2	1371-036
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 1,0 mm
	Orifice kit 3,3 mm   (for thermopump only) consist of:		1	1	1 or 2	1371-037
80L	Al-gasket
80Q	Al-gasket
80I	Orifice 3,3 mm
80J-1	Coil 220/230V, 50/60 Hz, 10 W	0.285				1372-537
80J-2	Coil 110V, 50/60 Hz, 10W	0.285				1372-538
80J-3	Coil 240V, 50 Hz, 10W	0.285				1372-539
80J-4	Coil 24V, 50 Hz, 10W	0.285				1372-541
	Intermediate pressure connection
90A-1	Welding flange	5,280			1	2322-087
90B-1	O-ring	0,006			1	1331-099
90C-1	Counter flange	5,620			1	2344-010
90D-1	Hexagon head screw M16 x 75	0,155			4	1424-108
90E-1	Spring washer dia. 16	0,004			4	1437-027
90F-1	Welding flange 160 x 160	3,885			2	2342-040
90G-1	Gasket	0,020			1	2354-106
90H-1	Hexagon head screw M16 x 65	0,100			4	1424-106
90J-1	Nut M16	0,030			4	1432-067